From mboxrd@z Thu Jan 1 00:00:00 1970 Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.remote-ip=5.75.144.95 ARC-Seal: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; cv=none; t=1794076015; b=MTO+oh0BAAJAcIYc4gtNaTJML0V8X1YePjz0JCZujKLIe8uLPyWPfJHeUQw2dwMPMiJN DKQDGwR1BLUFkFcFF7CJHXQOrHits4Wi/Qivr3F4PGxx3K9hF0IecvnwXWlp98Gqr4Wva Bo5iuUJTmkh4W0yeBJqnXN8aysjR5A4mJYWy30vtdfupuT49/JF3FXabRIIBphZZaQk6/ mBvPJ1QC1W+004RLFJ4KFtjjGHAS+PypiyVhE1UBexPMljtHCsYIZjfnPDh/y0P8Zjz7I Md70SY57c+MTxJOK8NUdFUkVGCETsi2NKLh3jT2RoI3bxiF44T+VEspX4ERiK38z7LQ== ARC-Message-Signature: i=1; d=subspace.kernel.org; s=arc20261015; a=rsa-sha256; c=relaxed/relaxed; t=1794076015; h=DMARC-Filter:DKIM-Signature:DKIM-Signature:MIME-Version:Date:From:To: Cc:Subject:In-Reply-To:References:Message-ID:X-Sender:Content-Type: Content-Transfer-Encoding; bh=2OlRM02ztzV8yXMDP77XNgprV2JIB+WYt2A0aFSyZMc=; b=vztioxiy5Ilaslk1ShOL69jVYsDHyxMy5B9gi1BQAfFYxP9j51MxMClWcdrHZBVcT4yH bNmrtBRNo+Am2VRtRdsyfgL7ZyRemMmbMXza9nVPAcbhdLn7WzsBzkobmzBeKRltB+rhK xQcbk3AklD/4Gj8NE/CA5m/XZLKh49M6SENe9syhcoSQoC5VsRIznm+KvazqpIyXFxKTW NwyX7K30QgNZP8PPNcyeSZvNzE6waTm5L6fUjdzijrfpYh4vO7xrp7IZFxRrU+EnvoF8r gCWaz5C51S75iAqkxPXPco2Qbu+dWKOqpSe4DqcIeItL0yMQ1RNUboiYc+iZ+WG9Orw== ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass header.from=mainlining.org; spf=pass smtp.mailfrom=mainlining.org; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=rsa-sha256 header.s=202507r header.b=hSEEV9P5; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=ed25519-sha256 header.s=202507e header.b="/Vwv3R33"; arc=none smtp.remote-ip=5.75.144.95 Received: from mail.mainlining.org (mail.mainlining.org [5.75.144.95]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature ECDSA (prime256v1)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 41B45606A326; Sat, 7 Nov 2026 18:26:53 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.2 smtp.subspace.kernel.org 41B45606A326 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=reject dis=none) header.from=mainlining.org Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=mainlining.org Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=mainlining.org header.i=@mainlining.org header.a=rsa-sha256 header.s=202507r header.b=hSEEV9P5; dkim=pass header.d=mainlining.org header.i=@mainlining.org header.a=ed25519-sha256 header.s=202507e header.b=/Vwv3R33 DKIM-Signature: v=1; a=rsa-sha256; s=202507r; d=mainlining.org; c=relaxed/relaxed; h=Message-ID:Subject:To:From:Date; t=1794076007; bh=2OlRM02ztzV8yXMDP77XNgp rV2JIB+WYt2A0aFSyZMc=; b=hSEEV9P5sqF3ukXJhiL2b1F9dvHrOwgXybl1NfFAH3Lgyc2rO+ Bg2YEhdQSfBRo76c5FdKiUwKjlvoU+gIyXeaTMumqOWua1D6a442gs92NIYRR2hCOzzNqQADnuH EVzcCz79u36abnM3YgAN53zFrivzs2nqg+uyYWxB/rNDajO47kCoy74XaS4mCyD+DLiSaHC6jtW zl07HGVK7qeQdEHdYOCWUEa5BmH2rip8+DyrRRprtqhksdTU2cevsFLXtQoWqw0tLN4cMu5ewhr g4mhZdxcaOGFRD484URtRO43K5kdTn20je8KBV5hRLibXFfPjfxllgdg9DMhThtqQSg==; DKIM-Signature: v=1; a=ed25519-sha256; s=202507e; d=mainlining.org; c=relaxed/relaxed; h=Message-ID:Subject:To:From:Date; t=1794076007; bh=2OlRM02ztzV8yXMDP77XNgp rV2JIB+WYt2A0aFSyZMc=; b=/Vwv3R33hPs6BXwzRj4FjBlZG5PUj2kx+biifQHVdDRrXXPcHN cVtMPxzLf7iJZnaMBMpwmpHfHIICfQ97KsDw==; X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Post: List-Help: List-Subscribe: List-Unsubscribe: List-Owner: Precedence: list MIME-Version: 1.0 Date: Sat, 07 Nov 2026 19:26:47 +0100 From: =?UTF-8?Q?Barnab=C3=A1s_Cz=C3=A9m=C3=A1n?= To: Amir Hanip Cc: andersson@kernel.org, konradybcio@kernel.org, linux-arm-msm@vger.kernel.org, abelvesa@kernel.org, conor+dt@kernel.org, devicetree@vger.kernel.org, krzk+dt@kernel.org, linux-kernel@vger.kernel.org, robh@kernel.org, a39skl@gmail.com, konrad.dybcio@oss.qualcomm.com Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: sm6115-xiaomi-lemon: Split out a common dtsi In-Reply-To: <20261107141432.39099-3-killdeath104@gmail.com> References: <20261107141432.39099-1-killdeath104@gmail.com> <20261107141432.39099-3-killdeath104@gmail.com> Message-ID: X-Sender: barnabas.czeman@mainlining.org Content-Type: text/plain; charset=US-ASCII; format=flowed Content-Transfer-Encoding: 7bit On 2026-11-07 15:14, Amir Hanip wrote: > Move the nodes shared with the other Xiaomi SM6115 variants (Redmi 9T > and Poco M3) into sm6115-xiaomi-lime-common.dtsi, so that the other > variants can reuse them. No functional change intended: the > decompiled lemon DTS is identical before and after, except for the > numbering of auto-generated phandles. > > Signed-off-by: Amir Hanip > --- > .../boot/dts/qcom/sm6115-xiaomi-lemon.dts | 317 +---------------- > .../dts/qcom/sm6115-xiaomi-lime-common.dtsi | 335 ++++++++++++++++++ > 2 files changed, 336 insertions(+), 316 deletions(-) > create mode 100644 > arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi > > diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts > b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts > index 881e05b701..2caaca3033 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts > +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lemon.dts > @@ -5,41 +5,17 @@ > > /dts-v1/; > > -#include "sm6115.dtsi" > -#include "pm6125.dtsi" > -#include "pmi632.dtsi" > #include > - > -/delete-node/ &pil_adsp_mem; > -/delete-node/ &pil_gpu_mem; > -/delete-node/ &pil_ipa_fw_mem; > -/delete-node/ &pil_ipa_gsi_mem; > +#include "sm6115-xiaomi-lime-common.dtsi" > > / { > model = "Xiaomi Redmi 9T"; > compatible = "xiaomi,lemon", "qcom,sm6115"; > - chassis-type = "handset"; > > aliases { > mmc0 = &sdhc_2; > }; > > - chosen { > - #address-cells = <2>; > - #size-cells = <2>; > - ranges; > - > - framebuffer0: framebuffer@5c000000 { > - compatible = "simple-framebuffer"; > - reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; > - width = <1080>; > - height = <2340>; > - stride = <(1080 * 4)>; > - format = "a8r8g8b8"; > - clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > - }; > - }; > - > backlight_dsi: backlight-dsi { > compatible = "led-backlight"; > leds = <&led_backlight>; > @@ -49,38 +25,12 @@ backlight_dsi: backlight-dsi { > status = "disabled"; > }; > > - gpio-keys { > - compatible = "gpio-keys"; > - > - pinctrl-0 = <&vol_up_n>; > - pinctrl-names = "default"; > - > - key-volume-up { > - label = "Volume Up"; > - linux,code = ; > - gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; > - debounce-interval = <15>; > - linux,can-disable; > - wakeup-source; > - }; > - }; > - > reserved-memory { > pil_adsp_mem: memory@53400000 { > reg = <0x0 0x53400000 0x0 0x2600000>; > no-map; > }; > > - pil_ipa_fw_mem: memory@55a00000 { > - reg = <0x0 0x55a00000 0x0 0x10000>; > - no-map; > - }; > - > - pil_ipa_gsi_mem: memory@55a10000 { > - reg = <0x0 0x55a10000 0x0 0x5000>; > - no-map; > - }; > - > pil_gpu_mem: memory@fa400000 { > reg = <0x0 0xfa400000 0x0 0x2000>; > no-map; > @@ -108,19 +58,6 @@ vph_pwr: vph-pwr-regulator { > }; > }; > > -&dispcc { > - /* Prevent simplefb from dying until we wire panel driver */ > - status = "disabled"; > -}; > - > -&gpi_dma0 { > - status = "okay"; > -}; > - > -&gpu { > - status = "okay"; > -}; > - > &i2c1 { > status = "okay"; > > @@ -158,118 +95,13 @@ &mdss_dsi0_out { > data-lanes = <0 1 2 3>; > }; > > -&pil_cdsp_mem { > - reg = <0x0 0x51a00000 0x0 0xa00000>; > -}; > - > -&pm6125_gpios { > - vol_up_n: vol-up-n-state { > - pins = "gpio5"; > - function = "normal"; > - power-source = <0>; > - bias-pull-up; > - input-enable; > - }; > -}; > - > -&pmi632_typec { > - status = "okay"; > - > - connector { > - compatible = "usb-c-connector"; > - > - power-role = "dual"; > - data-role = "dual"; > - self-powered; > - > - typec-power-opmode = "default"; > - pd-disable; > - > - vbus-supply = <&pmi632_vbus>; > - > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > - > - port@0 { > - reg = <0>; > - pmi632_hs_in: endpoint { > - remote-endpoint = <&usb_dwc3_hs>; > - }; > - }; > - > - port@1 { > - reg = <1>; > - pmi632_ss_in: endpoint { > - remote-endpoint = <&usb_qmpphy_out>; > - }; > - }; > - }; > - }; > -}; > - > -&pmi632_vbus { > - regulator-min-microamp = <500000>; > - regulator-max-microamp = <1000000>; > - > - status = "okay"; > -}; > - > -&pon_pwrkey { > - status = "okay"; > -}; > - > -&pon_resin { > - linux,code = ; > - > - status = "okay"; > -}; > - > -&qupv3_id_0 { > - status = "okay"; > -}; > - > -&remoteproc_adsp { > - status = "okay"; > -}; > - > -&remoteproc_cdsp { > - status = "okay"; > -}; > - > -&remoteproc_mpss { > - status = "okay"; > -}; > - You should not override rpm_request node here, you can use the labels from the common to change the ranges like: &pm6125_s7 { regulator-min-microvolt = <1280000>; regulator-max-microvolt = <2080000>; }; > &rpm_requests { > regulators-0 { > - compatible = "qcom,rpm-pm6125-regulators"; > - > - pm6125_s6: s6 { > - regulator-min-microvolt = <304000>; > - regulator-max-microvolt = <1456000>; > - }; > - > pm6125_s7: s7 { > regulator-min-microvolt = <1280000>; > regulator-max-microvolt = <2080000>; > }; > > - pm6125_s8: s8 { > - regulator-min-microvolt = <1064000>; > - regulator-max-microvolt = <1304000>; > - }; > - > - pm6125_l1: l1 { > - regulator-min-microvolt = <952000>; > - regulator-max-microvolt = <1152000>; > - }; > - > - pm6125_l4: l4 { > - regulator-min-microvolt = <488000>; > - regulator-max-microvolt = <1000000>; > - }; > - > pm6125_l5: l5 { > regulator-min-microvolt = <1648000>; > regulator-max-microvolt = <2960000>; > @@ -278,11 +110,6 @@ pm6125_l5: l5 { > regulator-always-on; > }; > > - pm6125_l6: l6 { > - regulator-min-microvolt = <576000>; > - regulator-max-microvolt = <656000>; > - }; > - > pm6125_l7: l7 { > /* sdhci2 vdd-io-bias supply */ > regulator-min-microvolt = <1256000>; > @@ -291,51 +118,11 @@ pm6125_l7: l7 { > regulator-always-on; > }; > > - pm6125_l8: l8 { > - regulator-min-microvolt = <400000>; > - regulator-max-microvolt = <728000>; > - }; > - > - pm6125_l9: l9 { > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <2000000>; > - }; > - > - pm6125_l10: l10 { > - regulator-min-microvolt = <1704000>; > - regulator-max-microvolt = <1904000>; > - }; > - > pm6125_l11: l11 { > regulator-min-microvolt = <1768000>; > regulator-max-microvolt = <1952000>; > }; > > - pm6125_l12: l12 { > - regulator-min-microvolt = <1624000>; > - regulator-max-microvolt = <1984000>; > - }; > - > - pm6125_l13: l13 { > - regulator-min-microvolt = <1504000>; > - regulator-max-microvolt = <1952000>; > - }; > - > - pm6125_l14: l14 { > - regulator-min-microvolt = <1704000>; > - regulator-max-microvolt = <1904000>; > - }; > - > - pm6125_l15: l15 { > - regulator-min-microvolt = <2920000>; > - regulator-max-microvolt = <3232000>; > - }; > - > - pm6125_l16: l16 { > - regulator-min-microvolt = <1704000>; > - regulator-max-microvolt = <1904000>; > - }; > - > pm6125_l17: l17 { > regulator-min-microvolt = <1152000>; > regulator-max-microvolt = <1384000>; > @@ -346,21 +133,6 @@ pm6125_l18: l18 { > regulator-max-microvolt = <1232000>; > }; > > - pm6125_l19: l19 { > - regulator-min-microvolt = <1624000>; > - regulator-max-microvolt = <3304000>; > - }; > - > - pm6125_l20: l20 { > - regulator-min-microvolt = <1624000>; > - regulator-max-microvolt = <3304000>; > - }; > - > - pm6125_l21: l21 { > - regulator-min-microvolt = <2400000>; > - regulator-max-microvolt = <3600000>; > - }; > - > pm6125_l22: l22 { > regulator-min-microvolt = <2952000>; > regulator-max-microvolt = <2960000>; > @@ -369,11 +141,6 @@ pm6125_l22: l22 { > regulator-always-on; > }; > > - pm6125_l23: l23 { > - regulator-min-microvolt = <3200000>; > - regulator-max-microvolt = <3400000>; > - }; > - > pm6125_l24: l24 { > regulator-min-microvolt = <2704000>; > regulator-max-microvolt = <3600000>; > @@ -382,23 +149,9 @@ pm6125_l24: l24 { > }; > > &sdhc_2 { > - cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; > - > - pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>; > - pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>; > - pinctrl-names = "default", "sleep"; > - > - vmmc-supply = <&pm6125_l22>; > - vqmmc-supply = <&pm6125_l5>; > /* No binding for vdd-io-bias on L7*/ > no-sdio; > no-mmc; > - > - status = "okay"; > -}; > - > -&sleep_clk { > - clock-frequency = <32764>; > }; > > &spi2 { > @@ -406,8 +159,6 @@ &spi2 { > }; > > &tlmm { > - gpio-reserved-ranges = <14 4>; /* Fingerprint SPI */ > - > lm3692x_bl_active: lm3692x-active-state { > pins = "gpio99"; > function = "gpio"; > @@ -422,20 +173,6 @@ mdss_dsi_active: mdss-dsi-active-state { > bias-disable; > }; > > - sdc2_cd_on: sdc2-cd-on-state { > - pins = "gpio88"; > - function = "gpio"; > - drive-strength = <2>; > - bias-pull-up; > - }; > - > - sdc2_cd_off: sdc2-cd-off-state { > - pins = "gpio88"; > - function = "gpio"; > - drive-strength = <2>; > - bias-disable; > - }; > - > te_active: te-active-state { > pins = "gpio81"; > function = "mdp_vsync"; > @@ -443,55 +180,3 @@ te_active: te-active-state { > bias-pull-down; > }; > }; > - > -&ufs_mem_hc { > - vcc-max-microamp = <600000>; > - vcc-supply = <&pm6125_l24>; > - vccq2-max-microamp = <600000>; > - vccq2-supply = <&pm6125_l11>; > - vdd-hba-supply = <&pm6125_l18>; > - > - status = "okay"; > -}; > - > -&ufs_mem_phy { > - vdda-phy-supply = <&pm6125_l4>; > - vdda-pll-supply = <&pm6125_l12>; > - > - status = "okay"; > -}; > - > -&usb { > - status = "okay"; > -}; > - > -&usb_dwc3 { > - maximum-speed = "high-speed"; > -}; > - > -&usb_dwc3_hs { > - remote-endpoint = <&pmi632_hs_in>; > -}; > - > -&usb_hsphy { > - vdd-supply = <&pm6125_l4>; > - vdda-pll-supply = <&pm6125_l12>; > - vdda-phy-dpdm-supply = <&pm6125_l15>; > - > - status = "okay"; > -}; > - > -&usb_qmpphy { > - vdda-phy-supply = <&pm6125_l4>; > - vdda-pll-supply = <&pm6125_l12>; > - > - status = "okay"; > -}; > - > -&usb_qmpphy_out { > - remote-endpoint = <&pmi632_ss_in>; > -}; > - > -&xo_board { > - clock-frequency = <19200000>; > -}; > diff --git a/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi > b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi > new file mode 100644 > index 0000000000..16883e35b5 > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sm6115-xiaomi-lime-common.dtsi > @@ -0,0 +1,335 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) > +/* > + * Copyright (c) 2026 Adam Skladowski > + */ > + > +#include "sm6115.dtsi" > +#include "pm6125.dtsi" > +#include "pmi632.dtsi" > + > +/delete-node/ &pil_adsp_mem; > +/delete-node/ &pil_gpu_mem; > +/delete-node/ &pil_ipa_fw_mem; > +/delete-node/ &pil_ipa_gsi_mem; > + > +/ { > + chassis-type = "handset"; > + > + chosen { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + framebuffer0: framebuffer@5c000000 { > + compatible = "simple-framebuffer"; > + reg = <0 0x5c000000 0 (2340 * 1080 * 4)>; > + width = <1080>; > + height = <2340>; > + stride = <(1080 * 4)>; > + format = "a8r8g8b8"; > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + pinctrl-0 = <&vol_up_n>; > + pinctrl-names = "default"; > + > + key-volume-up { > + label = "Volume Up"; > + linux,code = ; > + gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; > + debounce-interval = <15>; > + linux,can-disable; > + wakeup-source; > + }; > + }; > + > + reserved-memory { > + pil_ipa_fw_mem: memory@55a00000 { > + reg = <0x0 0x55a00000 0x0 0x10000>; > + no-map; > + }; > + > + pil_ipa_gsi_mem: memory@55a10000 { > + reg = <0x0 0x55a10000 0x0 0x5000>; > + no-map; > + }; > + }; > +}; > + > +&dispcc { > + /* Prevent simplefb from dying until we wire panel driver */ > + status = "disabled"; > +}; > + > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > +}; > + > +&pil_cdsp_mem { > + reg = <0x0 0x51a00000 0x0 0xa00000>; > +}; > + > +&pm6125_gpios { > + vol_up_n: vol-up-n-state { > + pins = "gpio5"; > + function = "normal"; > + power-source = <0>; > + bias-pull-up; > + input-enable; > + }; > +}; > + > +&pmi632_typec { > + status = "okay"; > + > + connector { > + compatible = "usb-c-connector"; > + > + power-role = "dual"; > + data-role = "dual"; > + self-powered; > + > + typec-power-opmode = "default"; > + pd-disable; > + > + vbus-supply = <&pmi632_vbus>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + pmi632_hs_in: endpoint { > + remote-endpoint = <&usb_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + pmi632_ss_in: endpoint { > + remote-endpoint = <&usb_qmpphy_out>; > + }; > + }; > + }; > + }; > +}; > + > +&pmi632_vbus { > + regulator-min-microamp = <500000>; > + regulator-max-microamp = <1000000>; > + > + status = "okay"; > +}; > + > +&pon_pwrkey { > + status = "okay"; > +}; > + > +&pon_resin { > + linux,code = ; > + > + status = "okay"; > +}; > + > +&qupv3_id_0 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + status = "okay"; > +}; > + > +&remoteproc_cdsp { > + status = "okay"; > +}; > + > +&remoteproc_mpss { > + status = "okay"; > +}; > + Please add the missing regulators. > +&rpm_requests { > + regulators-0 { > + compatible = "qcom,rpm-pm6125-regulators"; > + > + pm6125_s6: s6 { > + regulator-min-microvolt = <304000>; > + regulator-max-microvolt = <1456000>; > + }; > + > + pm6125_s8: s8 { > + regulator-min-microvolt = <1064000>; > + regulator-max-microvolt = <1304000>; > + }; > + > + pm6125_l1: l1 { > + regulator-min-microvolt = <952000>; > + regulator-max-microvolt = <1152000>; > + }; > + > + pm6125_l4: l4 { > + regulator-min-microvolt = <488000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + pm6125_l6: l6 { > + regulator-min-microvolt = <576000>; > + regulator-max-microvolt = <656000>; > + }; > + > + pm6125_l8: l8 { > + regulator-min-microvolt = <400000>; > + regulator-max-microvolt = <728000>; > + }; > + > + pm6125_l9: l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2000000>; > + }; > + > + pm6125_l10: l10 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l12: l12 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <1984000>; > + }; > + > + pm6125_l13: l13 { > + regulator-min-microvolt = <1504000>; > + regulator-max-microvolt = <1952000>; > + }; > + > + pm6125_l14: l14 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l15: l15 { > + regulator-min-microvolt = <2920000>; > + regulator-max-microvolt = <3232000>; > + }; > + > + pm6125_l16: l16 { > + regulator-min-microvolt = <1704000>; > + regulator-max-microvolt = <1904000>; > + }; > + > + pm6125_l19: l19 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l20: l20 { > + regulator-min-microvolt = <1624000>; > + regulator-max-microvolt = <3304000>; > + }; > + > + pm6125_l21: l21 { > + regulator-min-microvolt = <2400000>; > + regulator-max-microvolt = <3600000>; > + }; > + > + pm6125_l23: l23 { > + regulator-min-microvolt = <3200000>; > + regulator-max-microvolt = <3400000>; > + }; > + }; > +}; > + > +&sdhc_2 { > + cd-gpios = <&tlmm 88 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&sdc2_state_on>, <&sdc2_cd_on>; > + pinctrl-1 = <&sdc2_state_off>, <&sdc2_cd_off>; > + pinctrl-names = "default", "sleep"; > + > + vmmc-supply = <&pm6125_l22>; > + vqmmc-supply = <&pm6125_l5>; > + > + status = "okay"; > +}; > + > +&sleep_clk { > + clock-frequency = <32764>; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <14 4>; /* SE5 SPI (fingerprint), not usable > from Linux */ > + > + sdc2_cd_on: sdc2-cd-on-state { > + pins = "gpio88"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + sdc2_cd_off: sdc2-cd-off-state { > + pins = "gpio88"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > +}; > + > +&ufs_mem_hc { > + vcc-max-microamp = <600000>; > + vcc-supply = <&pm6125_l24>; > + vccq2-max-microamp = <600000>; > + vccq2-supply = <&pm6125_l11>; > + vdd-hba-supply = <&pm6125_l18>; > + > + status = "okay"; > +}; > + > +&ufs_mem_phy { > + vdda-phy-supply = <&pm6125_l4>; > + vdda-pll-supply = <&pm6125_l12>; > + > + status = "okay"; > +}; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_dwc3 { > + maximum-speed = "high-speed"; > +}; > + > +&usb_dwc3_hs { > + remote-endpoint = <&pmi632_hs_in>; > +}; > + > +&usb_hsphy { > + vdd-supply = <&pm6125_l4>; > + vdda-pll-supply = <&pm6125_l12>; > + vdda-phy-dpdm-supply = <&pm6125_l15>; > + > + status = "okay"; > +}; > + > +&usb_qmpphy { > + vdda-phy-supply = <&pm6125_l4>; > + vdda-pll-supply = <&pm6125_l12>; > + > + status = "okay"; > +}; > + > +&usb_qmpphy_out { > + remote-endpoint = <&pmi632_ss_in>; > +}; > + > +&xo_board { > + clock-frequency = <19200000>; > +};