From: Quentin Schulz <quentin.schulz@free-electrons.com>
To: Jonathan Cameron <jic23@kernel.org>,
knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net,
maxime.ripard@free-electrons.com, wens@csie.org,
dmitry.torokhov@gmail.com, lee.jones@linaro.org
Cc: antoine.tenart@free-electrons.com,
thomas.petazzoni@free-electrons.com,
linux-kernel@vger.kernel.org, linux-iio@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-input@vger.kernel.org
Subject: Re: [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen
Date: Sun, 25 Sep 2016 21:44:09 +0200 [thread overview]
Message-ID: <db3ab94a-9dbb-3bd6-fe43-e530b42c9246@free-electrons.com> (raw)
In-Reply-To: <8174039f-777e-b4b8-58c9-3509748f2799@kernel.org>
On 24/07/2016 13:24, Jonathan Cameron wrote:
> On 20/07/16 09:29, Quentin Schulz wrote:
>> This adds support for Allwinner SoCs' (A10, A13 and A31) resistive
>> touchscreen. This driver is probed by the MFD sunxi-gpadc-mfd.
>>
>> This driver uses ADC channels exposed through the IIO framework by
>> sunxi-gpadc-iio to get its data. When opening this input device, it will
>> start buffering in the ADC driver and enable a TP_UP_PENDING irq. The ADC
>> driver will fill in a buffer with all data and call the callback the input
>> device associated with this buffer. The input device will then read the
>> buffer two by two and send X and Y coordinates to the input framework based
>> on what it received from the ADC's buffer. When closing this input device,
>> the buffering is stopped.
>>
>> Note that locations in the first received buffer after an TP_UP_PENDING irq
>> occurred are unreliable, thus dropped.
>>
> I think I now understand what you are doing.
>
> The channel grab is grabbing 4 channels, when there are only two real
> ones (x and y) then you are abusing the callback interface from IIO.
Actually, I need an IIO channel only for registering the callback from
the consumer but I never use the IIO channel in an other way from
consumer side (everything's done in the provider by reading the FIFO
register and sending data to the callback via iio_buffer).
> That transmits only one scan (e.g. here (x,y)) per call. Because you
> have added a sideband route for the buffer size what you have wil work.
>
> However, it is not how the interface should be used. Please fix that.
> Using it correctly is not a big issue.
>
> On the channels front, I'd be tempted to do this as follows:
>
> 6 Channels, not 4.
>
> First 4 are standard ADC channels
> Next 2 are the touch screen channels with appropriate descriptions
> (guessing these are actually differential channels across the various
> wires of the first two?)
>
Yes they are differential channels.
However, I think there is actually no sense in using several channels
for the touchscreen as everything is handled by the hardware. You only
select the touchscreen mode by setting a register and then X and Y
coordinates will be added to the FIFO register when touching the
touchscreen. I would not mind not having IIO channel at all since we do
not read from the consumer. But I need a way to register a callback to
get data from the provider. I don't know if I make myself clear enough?
> Then you set the map up to apply to the last two channels only.
> By setting available_scan_masks to the relevant options in the IIO driver
> you'll be able to automatically lock the device when ever the
> touch screeen driver is loaded.
>
> That map will be something like (in binary
> 000000
> 000011
> 000100
> 001000
> 010000
> 100000
> 001100
> 010100
> 011000
> 100100
> 101000
> 110000
> 011100
> 101100
> 110100
> 111000
> 111100
>
> thus any combination of the ADC channels, but always all or none of the
> touchscreen (none when ever the ADC channels are on) the order above
> ensures we always turn on the minimum possible for a given requirement.
>
> Hence whenever the touch screen is there it'll lock out the ADC usage.
> Your postenable can look at what is there and put it in the right mode.
>
I'll dive more into that.
> After that, break your fifo read up into individual pairs of readings
> and push those out.
>
> That way we end up using the interface in the standard fashion.
>
> You'll also need fix the usage of the fifo for ADC mode which suffers
> from the same problem. There all sorts of nasty crashes might occur
> or you might just loose data
>
[...]
>> +/*
>> + * This function will be called by iio_push_to_buffers from another driver
>> + * (namely sunxi-gpadc-iio). It will be passed the buffer filled with input
>> + * values (X value then Y value) and the sunxi_gpadc_ts structure representing
>> + * the device.
>> + */
>> +static int sunxi_gpadc_ts_callback(const void *data, void *private)
>> +{
>> + const struct sunxi_gpadc_buffer *buffer = data;
>> + struct sunxi_gpadc_ts *info = private;
>> + int i = 0;
>> +
>> + /* Locations in the first buffer after an up event are unreliable */
>> + if (info->ignore_fifo_data) {
>> + info->ignore_fifo_data = false;
>> + return 0;
>> + }
>> +
> It doesn't work like this at all. You'll get one scan only on each call of
> this function. As I said in the previous driver, if there is a true reason
> to do this (and I'm unconvinced as yet) then we need to add support in the
> iio core etc for this (and emulating it when multiple scan passing isn't
> happening).
>
> I guess this will work, as you are passing the buffer size as a side
> band, but it is definitely not how that ABI is meant to be used.
>
> Also, you grab 4 channels, and only two are used here. Please explain...
>
Hum. Actually, that's a mistake. I'm quiet confused about how I should
do it while I never read channels from the consumer. I still "need" one
for "linking" the consumer and the provider but in the meantime, I'm
never using that channel.
Thanks,
Quentin
--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
next prev parent reply other threads:[~2016-09-25 19:44 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-20 8:29 [PATCH 0/5] add resistive touchscreen support for new Allwinner SoCs' GPADC's driver Quentin Schulz
2016-07-20 8:29 ` [PATCH 1/5] mfd: sunxi-gpadc-mfd: add TP_UP_PENDING irq Quentin Schulz
2016-07-20 8:29 ` [PATCH 2/5] mfd: sunxi-gpadc-mfd: add buffer structure Quentin Schulz
2016-07-24 10:32 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 3/5] iio: adc: sunxi-gpadc-iio: enable iio_buffers Quentin Schulz
2016-07-20 8:38 ` Peter Meerwald-Stadler
2016-07-20 8:57 ` Quentin Schulz
2016-07-24 11:03 ` Jonathan Cameron
2016-09-24 17:40 ` Quentin Schulz
2016-09-25 9:10 ` Jonathan Cameron
2016-09-25 19:57 ` Quentin Schulz
2016-09-27 19:38 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 4/5] input: touchscreen: support Allwinner SoCs' touchscreen Quentin Schulz
2016-07-20 17:25 ` Dmitry Torokhov
2016-07-20 20:13 ` Jonathan Cameron
2016-09-24 18:26 ` Quentin Schulz
2016-09-24 18:39 ` Dmitry Torokhov
2016-07-21 6:29 ` Maxime Ripard
2016-07-21 6:41 ` Dmitry Torokhov
2016-07-25 9:45 ` maxime.ripard
2016-07-25 17:08 ` Dmitry Torokhov
2016-07-26 15:13 ` Maxime Ripard
2016-07-24 11:24 ` Jonathan Cameron
2016-09-25 19:44 ` Quentin Schulz [this message]
2016-09-27 19:59 ` Jonathan Cameron
2016-07-20 8:29 ` [PATCH 5/5] mfd: sunxi-gpadc-mfd: probe sunxi-gpadc-ts driver Quentin Schulz
2016-07-21 6:08 ` Maxime Ripard
2016-07-24 11:26 ` Jonathan Cameron
2016-07-25 9:51 ` Maxime Ripard
2016-07-25 10:08 ` Jonathan Cameron
2016-07-25 10:21 ` Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=db3ab94a-9dbb-3bd6-fe43-e530b42c9246@free-electrons.com \
--to=quentin.schulz@free-electrons.com \
--cc=antoine.tenart@free-electrons.com \
--cc=dmitry.torokhov@gmail.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=pmeerw@pmeerw.net \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®