mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: 孙守鑫 <sunshouxin@chinatelecom.cn>
To: Jay Vosburgh <jay.vosburgh@canonical.com>
Cc: vfalico@gmail.com, andy@greyhouse.net, davem@davemloft.net,
	kuba@kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org, huyd12@chinatelecom.cn
Subject: Re: [PATCH v5] net: bonding: Add support for IPV6 ns/na to balance-alb/balance-tlb mode
Date: Tue, 28 Dec 2021 11:01:39 +0800	[thread overview]
Message-ID: <db66dccf-0c84-d22d-fb2f-f99d3ce2371d@chinatelecom.cn> (raw)
In-Reply-To: <24897.1640637370@famine>


在 2021/12/28 4:36, Jay Vosburgh 写道:
> Sun Shouxin <sunshouxin@chinatelecom.cn> wrote:
>
>> Since ipv6 neighbor solicitation and advertisement messages
>> isn't handled gracefully in bonding6 driver, we can see packet
>> drop due to inconsistency bewteen mac address in the option
>> message and source MAC .
>>
>> Another examples is ipv6 neighbor solicitation and advertisement
>> messages from VM via tap attached to host brighe, the src mac
>> mighe be changed through balance-alb mode, but it is not synced
>> with Link-layer address in the option message.
>>
>> The patch implements bond6's tx handle for ipv6 neighbor
>> solicitation and advertisement messages.
> 	I'm not sure what you've changed here for v5 as there's no
> changelog, but I believe the observed problems to be a transmit side
> effect (i.e., it is induced by the balance-tlb mode balancing of
> outgoing traffic).  As such, the tlb side will rebalance all of the
> traffic every ten seconds, so any MAC ND_OPT_*_LL_ADDR option
> assignments in the outgoing NS/NA datagrams will only be valid for that
> length of time, correct?


Yes,  MAC ND_OPT_*_LL_ADDR option assignments in the outgoing NS/NA
datagrams will only be valid for that length of time ,and then,
it will be inconsistensy in the next ten seconds.


> 	The topology diagram and example that you've removed from the
> commit log with v5 said, in part, that the issue arose because the
> LL_ADDR option MAC didn't match the actual source MAC.  Since tlb mode
> can reshuffle the flows every ten seconds, how did the proposed solution
> work reliably?


In function alb_set_nd_option, we will change the LL_ADDR option Mac
to the source Mac. This could work in this conditon.


>
> 	In any event, my real question is whether simply disabling tlb
> balancing for NS/NA datagrams will resolve the observed issues (i.e.,
> have bond_xmit_tlb_slave_get return NULL for IPv6 NS/NA datagrams).
> Doing so will cause all NS/NA traffic to egress through the active
> interface.  There's already a test in your logic to check for the
> tx_slave != bond->curr_active_slave, so presumably everything works
> correctly if the NS/NA goes out on the curr_active_slave.  If the "edit
> NS/NA datagrams" solution works even in the face of rebalance of
> traffic, then would simply assigning all NS/NA traffic to the
> curr_active_slave eliminate the problem?


Yes, assigning all Ns/Na traffic to the curr_active_slave can resolve the
difference between mac in the Ns/Na options with the source mac.
But this makes the rlb doesn't work in the alb mode,
one interface with bond6 will not receive any ingress packets.
It is mismatch Bond6 specification.


>
> 	-J
>
>> Suggested-by: Hu Yadi <huyd12@chinatelecom.cn>
>> Reported-by: kernel test robot <lkp@intel.com>
>> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn>
>> ---
>> drivers/net/bonding/bond_alb.c | 149 +++++++++++++++++++++++++++++++++
>> 1 file changed, 149 insertions(+)
>>
>> diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
>> index 533e476988f2..485e4863a365 100644
>> --- a/drivers/net/bonding/bond_alb.c
>> +++ b/drivers/net/bonding/bond_alb.c
>> @@ -22,6 +22,8 @@
>> #include <asm/byteorder.h>
>> #include <net/bonding.h>
>> #include <net/bond_alb.h>
>> +#include <net/ndisc.h>
>> +#include <net/ip6_checksum.h>
>>
>> static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = {
>> 	0x33, 0x33, 0x00, 0x00, 0x00, 0x01
>> @@ -1269,6 +1271,137 @@ static int alb_set_mac_address(struct bonding *bond, void *addr)
>> 	return res;
>> }
>>
>> +/*determine if the packet is NA or NS*/
>> +static bool __alb_determine_nd(struct icmp6hdr *hdr)
>> +{
>> +	if (hdr->icmp6_type == NDISC_NEIGHBOUR_ADVERTISEMENT ||
>> +	    hdr->icmp6_type == NDISC_NEIGHBOUR_SOLICITATION) {
>> +		return true;
>> +	}
>> +
>> +	return false;
>> +}
>> +
>> +static void alb_change_nd_option(struct sk_buff *skb, void *data)
>> +{
>> +	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
>> +	struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)msg->opt;
>> +	struct net_device *dev = skb->dev;
>> +	struct icmp6hdr *icmp6h = icmp6_hdr(skb);
>> +	struct ipv6hdr *ip6hdr = ipv6_hdr(skb);
>> +	u8 *lladdr = NULL;
>> +	u32 ndoptlen = skb_tail_pointer(skb) - (skb_transport_header(skb) +
>> +				offsetof(struct nd_msg, opt));
>> +
>> +	while (ndoptlen) {
>> +		int l;
>> +
>> +		switch (nd_opt->nd_opt_type) {
>> +		case ND_OPT_SOURCE_LL_ADDR:
>> +		case ND_OPT_TARGET_LL_ADDR:
>> +			lladdr = ndisc_opt_addr_data(nd_opt, dev);
>> +			break;
>> +
>> +		default:
>> +			lladdr = NULL;
>> +			break;
>> +		}
>> +
>> +		l = nd_opt->nd_opt_len << 3;
>> +
>> +		if (ndoptlen < l || l == 0)
>> +			return;
>> +
>> +		if (lladdr) {
>> +			memcpy(lladdr, data, dev->addr_len);
>> +			icmp6h->icmp6_cksum = 0;
>> +
>> +			icmp6h->icmp6_cksum = csum_ipv6_magic(&ip6hdr->saddr,
>> +							      &ip6hdr->daddr,
>> +						ntohs(ip6hdr->payload_len),
>> +						IPPROTO_ICMPV6,
>> +						csum_partial(icmp6h,
>> +							     ntohs(ip6hdr->payload_len), 0));
>> +			return;
>> +		}
>> +		ndoptlen -= l;
>> +		nd_opt = ((void *)nd_opt) + l;
>> +	}
>> +}
>> +
>> +static u8 *alb_get_lladdr(struct sk_buff *skb)
>> +{
>> +	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
>> +	struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)msg->opt;
>> +	struct net_device *dev = skb->dev;
>> +	u8 *lladdr = NULL;
>> +	u32 ndoptlen = skb_tail_pointer(skb) - (skb_transport_header(skb) +
>> +				offsetof(struct nd_msg, opt));
>> +
>> +	while (ndoptlen) {
>> +		int l;
>> +
>> +		switch (nd_opt->nd_opt_type) {
>> +		case ND_OPT_SOURCE_LL_ADDR:
>> +		case ND_OPT_TARGET_LL_ADDR:
>> +			lladdr = ndisc_opt_addr_data(nd_opt, dev);
>> +			break;
>> +
>> +		default:
>> +			break;
>> +		}
>> +
>> +		l = nd_opt->nd_opt_len << 3;
>> +
>> +		if (ndoptlen < l || l == 0)
>> +			return NULL;
>> +
>> +		if (lladdr)
>> +			return lladdr;
>> +
>> +		ndoptlen -= l;
>> +		nd_opt = ((void *)nd_opt) + l;
>> +	}
>> +
>> +	return lladdr;
>> +}
>> +
>> +static void alb_set_nd_option(struct sk_buff *skb, struct bonding *bond,
>> +			      struct slave *tx_slave)
>> +{
>> +	struct ipv6hdr *ip6hdr;
>> +	struct icmp6hdr *hdr;
>> +
>> +	if (skb->protocol == htons(ETH_P_IPV6)) {
>> +		if (tx_slave && tx_slave !=
>> +		    rcu_access_pointer(bond->curr_active_slave)) {
>> +			ip6hdr = ipv6_hdr(skb);
>> +			if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
>> +				hdr = icmp6_hdr(skb);
>> +				if (__alb_determine_nd(hdr))
>> +					alb_change_nd_option(skb, tx_slave->dev->dev_addr);
>> +			}
>> +		}
>> +	}
>> +}
>> +
>> +static bool alb_determine_nd(struct sk_buff *skb, struct bonding *bond)
>> +{
>> +	struct ipv6hdr *ip6hdr;
>> +	struct icmp6hdr *hdr;
>> +
>> +	if (skb->protocol == htons(ETH_P_IPV6)) {
>> +		ip6hdr = ipv6_hdr(skb);
>> +		if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
>> +			hdr = icmp6_hdr(skb);
>> +			if (__alb_determine_nd(hdr))
>> +				return true;
>> +		}
>> +	}
>> +
>> +	return false;
>> +}
>> +
>> /************************ exported alb functions ************************/
>>
>> int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
>> @@ -1350,6 +1483,9 @@ struct slave *bond_xmit_tlb_slave_get(struct bonding *bond,
>> 		switch (skb->protocol) {
>> 		case htons(ETH_P_IP):
>> 		case htons(ETH_P_IPV6):
>> +			if (alb_determine_nd(skb, bond))
>> +				break;
>> +
>> 			hash_index = bond_xmit_hash(bond, skb);
>> 			if (bond->params.tlb_dynamic_lb) {
>> 				tx_slave = tlb_choose_channel(bond,
>> @@ -1446,6 +1582,18 @@ struct slave *bond_xmit_alb_slave_get(struct bonding *bond,
>> 			break;
>> 		}
>>
>> +		if (alb_determine_nd(skb, bond)) {
>> +			u8 *lladdr;
>> +
>> +			lladdr = alb_get_lladdr(skb);
>> +			if (lladdr) {
>> +				if (!bond_slave_has_mac_rx(bond, lladdr)) {
>> +					do_tx_balance = false;
>> +					break;
>> +				}
>> +			}
>> +		}
>> +
>> 		hash_start = (char *)&ip6hdr->daddr;
>> 		hash_size = sizeof(ip6hdr->daddr);
>> 		break;
>> @@ -1489,6 +1637,7 @@ netdev_tx_t bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
>> 	struct slave *tx_slave = NULL;
>>
>> 	tx_slave = bond_xmit_alb_slave_get(bond, skb);
>> +	alb_set_nd_option(skb, bond, tx_slave);
>> 	return bond_do_alb_xmit(skb, bond, tx_slave);
>> }
>>
>>
>> base-commit: 7a29b11da9651ef6a970e2f6bfd276f053aeb06a
>> -- 
>> 2.27.0
>>
> ---
> 	-Jay Vosburgh, jay.vosburgh@canonical.com

  reply	other threads:[~2021-12-28  3:01 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-24 14:25 Sun Shouxin
2021-12-24 22:57 ` Jakub Kicinski
2021-12-27 10:06 ` 回复: " huyd12
2021-12-27 20:36 ` Jay Vosburgh
2021-12-28  3:01   ` 孙守鑫 [this message]
2022-01-04  8:35     ` 孙守鑫
2022-01-07  8:13       ` 孙守鑫

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=db66dccf-0c84-d22d-fb2f-f99d3ce2371d@chinatelecom.cn \
    --to=sunshouxin@chinatelecom.cn \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=huyd12@chinatelecom.cn \
    --cc=jay.vosburgh@canonical.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®