mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Leonard Lausen" <leonard@lausen.nl>
To: sbinding@opensource.cirrus.com, david.rhodes@cirrus.com,
	rf@opensource.cirrus.com, perex@perex.cz, tiwai@suse.com
Cc: linux-sound@vger.kernel.org, patches@opensource.cirrus.com,
	linux-kernel@vger.kernel.org, me@nicho1as.wang
Subject: [PATCH] ALSA: hda: cs35l41: Fix boost type for HP Dragonfly 13.5    inch G4
Date: Fri, 27 Mar 2026 22:25:15 +0000	[thread overview]
Message-ID: <db84dcf91bc8dbd217b35572b177d967655ff903@lausen.nl> (raw)

The HP Dragonfly 13.5 inch G4 (SSID 103C8B63) has _DSD properties in
ACPI firmware with valid reset-gpios and cs-gpios for the four CS35L41
amplifiers on SPI.

However, the _DSD specifies cirrus,boost-type as Internal (0), while
the hardware requires External Boost. With Internal Boost configured,
the amplifiers trigger "Amp short error" when audio is played at
moderate-to-high volume, eventually shutting down entirely.

Add a configuration table entry to override the boost type to
External, similar to the existing workaround for 103C89C6. All GPIO
indices are set to -1 since the _DSD provides valid reset-gpios and
cs-gpios.

Confirmed on BIOS V90 01.11.00 (January 2026), the latest available.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219520
Originally-by: Nicholas Wang <me@nicho1as.wang>
Signed-off-by: Leonard Lausen <leonard@lausen.nl>
---
This is a reworked version of Nicholas Wang's patch from Nov 2024 [1].
Stefan Binding noted that this laptop should have valid _DSD.

Analysis of the ACPI DSDT confirms the _DSD exists with valid
reset-gpios, cs-gpios, and cirrus,speaker-position. However,
cirrus,boost-type is set to 0 (Internal) while the hardware requires
External Boost. The cs35l41_hda_parse_acpi() fallback also gets this
wrong since it infers Internal from the non-zero boost parameters.

With Internal Boost, all four amps hit "Amp short error" at
moderate volume. Overriding to External Boost (like 103C89C6)
resolves the issue. GPIO indices are set to -1 since the _DSD
provides valid reset-gpios and cs-gpios, addressing Stefan's
concern about cs_gpio_index.

Tested on BIOS V90 01.11.00 (Jan 2026, latest available from HP).

[1] https://lore.kernel.org/linux-sound/20241122044435.28061-1-me@nicho1as.wang/

 sound/hda/codecs/side-codecs/cs35l41_hda_property.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
index 16d5ea77192f..732ae534db36 100644
--- a/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
+++ b/sound/hda/codecs/side-codecs/cs35l41_hda_property.c
@@ -55,6 +55,11 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "103C8A30", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
 	{ "103C8A31", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
 	{ "103C8A6E", 4, EXTERNAL, { CS35L41_LEFT, CS35L41_LEFT, CS35L41_RIGHT, CS35L41_RIGHT }, 0, -1, -1, 0, 0, 0 },
+/*
+ * Device 103C8B63 has _DSD with valid reset-gpios and cs-gpios, however the
+ * boost type is incorrectly set to Internal. Override to External Boost.
+ */
+	{ "103C8B63", 4, EXTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, CS35L41_RIGHT, CS35L41_LEFT }, -1, -1, -1, 0, 0, 0 },
 	{ "103C8BB3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
 	{ "103C8BB4", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
 	{ "103C8BDD", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
@@ -475,6 +480,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "103C8A30", generic_dsd_config },
 	{ "CSC3551", "103C8A31", generic_dsd_config },
 	{ "CSC3551", "103C8A6E", generic_dsd_config },
+	{ "CSC3551", "103C8B63", generic_dsd_config },
 	{ "CSC3551", "103C8BB3", generic_dsd_config },
 	{ "CSC3551", "103C8BB4", generic_dsd_config },
 	{ "CSC3551", "103C8BDD", generic_dsd_config },
-- 
2.43.0

             reply	other threads:[~2026-03-27 22:25 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-27 22:25 Leonard Lausen [this message]
2026-03-30 16:25 ` Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=db84dcf91bc8dbd217b35572b177d967655ff903@lausen.nl \
    --to=leonard@lausen.nl \
    --cc=david.rhodes@cirrus.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=me@nicho1as.wang \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=rf@opensource.cirrus.com \
    --cc=sbinding@opensource.cirrus.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®