From: <sean.wang@mediatek.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>
Cc: <Mark-YW.Chen@mediatek.com>, <sean.wang@mediatek.com>,
<Soul.Huang@mediatek.com>, <YN.Chen@mediatek.com>,
<Leon.Yen@mediatek.com>, <Eric-SY.Chang@mediatek.com>,
<Deren.Wu@mediatek.com>, <km.lin@mediatek.com>,
<robin.chiu@mediatek.com>, <Eddie.Chen@mediatek.com>,
<ch.yeh@mediatek.com>, <posh.sun@mediatek.com>,
<ted.huang@mediatek.com>, <Eric.Liang@mediatek.com>,
<Stella.Chang@mediatek.com>, <Tom.Chou@mediatek.com>,
<steve.lee@mediatek.com>, <jsiuda@google.com>,
<frankgor@google.com>, <jemele@google.com>,
<abhishekpandit@google.com>, <michaelfsun@google.com>,
<mcchou@chromium.org>, <shawnku@google.com>,
<linux-bluetooth@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Yake Yang <yake.yang@mediatek.com>
Subject: [PATCH 1/2] Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921
Date: Wed, 23 Feb 2022 07:55:59 +0800 [thread overview]
Message-ID: <dba1c05e4bfdf53e631ff134eaa9449e2ad5deef.1645573830.git.objelf@gmail.com> (raw)
From: Yake Yang <yake.yang@mediatek.com>
Add VID 13D3 & PID 3567 for MediaTek MT7921 USB Bluetooth chip.
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3567 Rev= 1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us
E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us
Co-developed-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Yake Yang <yake.yang@mediatek.com>
---
drivers/bluetooth/btusb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 558151f2f150..9f8c3d41d504 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -455,6 +455,9 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3564), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x13d3, 0x3567), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x0489, 0xe0cd), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
--
2.25.1
next reply other threads:[~2022-02-22 23:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-22 23:55 sean.wang [this message]
2022-02-22 23:56 ` [PATCH 2/2] Bluetooth: btmtksdio: Fix kernel oops when sdio suspend sean.wang
2022-03-04 15:34 ` Marcel Holtmann
2022-03-04 15:34 ` [PATCH 1/2] Bluetooth: btusb: Add a new PID/VID 13d3/3567 for MT7921 Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dba1c05e4bfdf53e631ff134eaa9449e2ad5deef.1645573830.git.objelf@gmail.com \
--to=sean.wang@mediatek.com \
--cc=Deren.Wu@mediatek.com \
--cc=Eddie.Chen@mediatek.com \
--cc=Eric-SY.Chang@mediatek.com \
--cc=Eric.Liang@mediatek.com \
--cc=Leon.Yen@mediatek.com \
--cc=Mark-YW.Chen@mediatek.com \
--cc=Soul.Huang@mediatek.com \
--cc=Stella.Chang@mediatek.com \
--cc=Tom.Chou@mediatek.com \
--cc=YN.Chen@mediatek.com \
--cc=abhishekpandit@google.com \
--cc=ch.yeh@mediatek.com \
--cc=frankgor@google.com \
--cc=jemele@google.com \
--cc=johan.hedberg@gmail.com \
--cc=jsiuda@google.com \
--cc=km.lin@mediatek.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=marcel@holtmann.org \
--cc=mcchou@chromium.org \
--cc=michaelfsun@google.com \
--cc=posh.sun@mediatek.com \
--cc=robin.chiu@mediatek.com \
--cc=shawnku@google.com \
--cc=steve.lee@mediatek.com \
--cc=ted.huang@mediatek.com \
--cc=yake.yang@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®