Re: [PATCH v10 1/1] arm64: dts: qcom: qcs6490-rb3gen: add and enable BT node

[Janaki Ramaiah Thota <quic_janathot@quicinc.com>]

On 2/22/2025 12:46 AM, Alexey Klimov wrote:
> On Fri Feb 21, 2025 at 5:10 PM GMT, Janaki Ramaiah Thota wrote:
>> Add the PMU node for WCN6750 present on the qcs6490-rb3gen
> 
> Is it rb3gen or rb3gen2? Also in the subject.
> 
> The file that you patch seems to be "rb3gen2".
> 

Thanks for pointing out the typo, Alexey. Yes it is rb3gen2.

>> board and assign its power outputs to the Bluetooth module.
>>
>> In WCN6750 module sw_ctrl and wifi-enable pins are handled
>> in the wifi controller firmware. Therefore, it is not required
>> to have those pins' entries in the PMU node.
>>
>> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 171 ++++++++++++++++++-
>>   1 file changed, 170 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> index 7a36c90ad4ec..de03770e0b90 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> 
> [..]
> 
> Best regards,
> Alexey

Thanks,
Janakiram