mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Helge Deller <deller@gmx.de>
To: Guangshuo Li <lgs201920130244@gmail.com>,
	Antonino Daplas <adaplas@gmail.com>,
	linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: Re: [PATCH] riva/fbdev: fix divide error in nv3_arb()
Date: Mon, 8 Dec 2025 23:02:00 +0100	[thread overview]
Message-ID: <dc2a9d7b-0495-4365-8353-b51dc0526b74@gmx.de> (raw)
In-Reply-To: <20251207072532.518547-1-lgs201920130244@gmail.com>

On 12/7/25 08:25, Guangshuo Li wrote:
> A userspace program can trigger the RIVA NV3 arbitration code by
> calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so,
> the driver recomputes FIFO arbitration parameters in nv3_arb(), using
> state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor
> without validating it first.
> 
> In a normal setup, state->mclk_khz is provided by the real hardware
> and is non-zero. However, an attacker can construct a malicious or
> misconfigured device (e.g. a crafted/emulated PCI device) that exposes
> a bogus PLL configuration, causing state->mclk_khz to become zero.
> Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in
> the gns calculation causes a divide error and crashes the kernel.
> 
> Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division.
> 
> The following log reveals it:
> 
> rivafb: setting virtual Y resolution to 2184
> divide error: 0000 [#1] PREEMPT SMP KASAN PTI
> CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
> RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
> RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
> Code: c1 e8 03 42 0f b6 14 38 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 b7 0e 00 00 41 8b 46 18 01 d8 69 c0 40 42 0f 00 99 <41> f7 fc 48 63 c8 4c 89 e8 48 c1 e8 03 42 0f b6 14 38 4c 89 e8 83
> RSP: 0018:ffff888013b2f318 EFLAGS: 00010206
> RAX: 0000000001d905c0 RBX: 0000000000000016 RCX: 0000000000040000
> RDX: 0000000000000000 RSI: 0000000000000080 RDI: ffff888013b2f6f0
> RBP: 0000000000000002 R08: ffffffff82226288 R09: 0000000000000001
> R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
> R13: ffff888013b2f4d8 R14: ffff888013b2f6d8 R15: dffffc0000000000
> Call Trace:
>    nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
>    nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
>    CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
>    riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
>    rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196

Doesn't it make sense to check mclk_khz (or the various variables which
lead to mclk_khz) in rivafb_set_par() or any of the other functions mentioned
in this trace?
If in doubt, mclk_khz could be initialized to a sane value?

Helge


>    fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
>    do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
>    fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
>    __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856
> 
> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
> Cc: stable@vger.kernel.org
> Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
> ---
>   drivers/video/fbdev/riva/riva_hw.c | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/video/fbdev/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
> index 8b829b720064..d70c6c4d28e8 100644
> --- a/drivers/video/fbdev/riva/riva_hw.c
> +++ b/drivers/video/fbdev/riva/riva_hw.c
> @@ -436,6 +436,9 @@ static char nv3_arb(nv3_fifo_info * res_info, nv3_sim_state * state,  nv3_arb_in
>       vmisses = 2;
>       eburst_size = state->memory_width * 1;
>       mburst_size = 32;
> +	if (!state->mclk_khz)
> +		return (0);
> +
>       gns = 1000000 * (gmisses*state->mem_page_miss + state->mem_latency)/state->mclk_khz;
>       ainfo->by_gfacc = gns*ainfo->gdrain_rate/1000000;
>       ainfo->wcmocc = 0;


  reply	other threads:[~2025-12-08 22:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-07  7:25 Guangshuo Li
2025-12-08 22:02 ` Helge Deller [this message]
2025-12-17 13:31   ` Guangshuo Li
2025-12-09  9:02 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=dc2a9d7b-0495-4365-8353-b51dc0526b74@gmx.de \
    --to=deller@gmx.de \
    --cc=adaplas@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=lgs201920130244@gmail.com \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®