Re: [PATCH 3/4] iio: adc: ad7768-1: use devm_regulator_get_enable_read_voltage

[David Lechner <dlechner@baylibre.com>]

On 8/12/25 9:49 PM, Jonathan Santos wrote:
> Use devm_regulator_get_enable_read_voltage function as a standard and
> concise way of reading the voltage from the regulator and keep the
> regulator enabled. Replace the regulator descriptor with the direct
> voltage value in the device struct.
> 
> Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
> ---
>  drivers/iio/adc/ad7768-1.c | 29 +++++++----------------------
>  1 file changed, 7 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
> index 36ba208fc119..d0b9764a8f92 100644
> --- a/drivers/iio/adc/ad7768-1.c
> +++ b/drivers/iio/adc/ad7768-1.c
> @@ -225,7 +225,7 @@ struct ad7768_state {
>  	struct spi_device *spi;
>  	struct regmap *regmap;
>  	struct regmap *regmap24;
> -	struct regulator *vref;
> +	int vref_uv;
>  	struct regulator_dev *vcm_rdev;
>  	unsigned int vcm_output_sel;
>  	struct clk *mclk;
> @@ -809,7 +809,7 @@ static int ad7768_read_raw(struct iio_dev *indio_dev,
>  		return IIO_VAL_INT;
>  
>  	case IIO_CHAN_INFO_SCALE:
> -		scale_uv = regulator_get_voltage(st->vref);
> +		scale_uv = st->vref_uv;
>  		if (scale_uv < 0)
>  			return scale_uv;

Can also drop the error check since we've already done that in probe.