From: Joe Perches <joe@perches.com>
To: Nicolas Ferre <nicolas.ferre@atmel.com>,
Vinod Koul <vinod.koul@intel.com>,
Dan Williams <dan.j.williams@intel.com>,
Benoit Parrot <bparrot@ti.com>,
Ross Zwisler <ross.zwisler@linux.intel.com>,
Jiri Kosina <trivial@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>,
Matt Porter <mporter@kernel.crashing.org>,
Alexandre Bounine <alexandre.bounine@idt.com>,
linux-arm-kernel@lists.infradead.org, dmaengine@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
linux-nvdimm@ml01.01.org
Subject: [TRIVIAL PATCH] treewide: Remove unnecessary 0x prefixes before %pa extension uses
Date: Fri, 4 Mar 2016 23:46:32 -0800 [thread overview]
Message-ID: <dcdebc08a17023fac93595312281cb8e91185668.1457162650.git.joe@perches.com> (raw)
Since commit 3cab1e711297 ("lib/vsprintf: refactor duplicate code
to special_hex_number()") %pa uses have been ouput with a 0x prefix.
These 0x prefixes in the formats are unnecessary.
Signed-off-by: Joe Perches <joe@perches.com>
---
drivers/dma/at_hdmac_regs.h | 2 +-
drivers/media/platform/ti-vpe/cal.c | 2 +-
drivers/nvdimm/pmem.c | 2 +-
drivers/rapidio/devices/rio_mport_cdev.c | 4 ++--
drivers/rapidio/devices/tsi721.c | 8 ++++----
5 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 7f58f06..0474e4a 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -385,7 +385,7 @@ static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
{
dev_crit(chan2dev(&atchan->chan_common),
- " desc: s%pad d%pad ctrl0x%x:0x%x l0x%pad\n",
+ " desc: s%pad d%pad ctrl0x%x:0x%x l%pad\n",
&lli->saddr, &lli->daddr,
lli->ctrla, lli->ctrlb, &lli->dscr);
}
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index 82001e6..7dce489 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -498,7 +498,7 @@ static inline void cal_runtime_put(struct cal_dev *dev)
static void cal_quickdump_regs(struct cal_dev *dev)
{
- cal_info(dev, "CAL Registers @ 0x%pa:\n", &dev->res->start);
+ cal_info(dev, "CAL Registers @ %pa:\n", &dev->res->start);
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4,
(__force const void *)dev->base,
resource_size(dev->res), false);
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 8d0b546..eb619d1 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -172,7 +172,7 @@ static struct pmem_device *pmem_alloc(struct device *dev,
if (!devm_request_mem_region(dev, pmem->phys_addr, pmem->size,
dev_name(dev))) {
- dev_warn(dev, "could not reserve region [0x%pa:0x%zx]\n",
+ dev_warn(dev, "could not reserve region [%pa:0x%zx]\n",
&pmem->phys_addr, pmem->size);
return ERR_PTR(-EBUSY);
}
diff --git a/drivers/rapidio/devices/rio_mport_cdev.c b/drivers/rapidio/devices/rio_mport_cdev.c
index a3369d1..211a67d 100644
--- a/drivers/rapidio/devices/rio_mport_cdev.c
+++ b/drivers/rapidio/devices/rio_mport_cdev.c
@@ -2223,7 +2223,7 @@ static void mport_mm_open(struct vm_area_struct *vma)
{
struct rio_mport_mapping *map = vma->vm_private_data;
-rmcd_debug(MMAP, "0x%pad", &map->phys_addr);
+ rmcd_debug(MMAP, "%pad", &map->phys_addr);
kref_get(&map->ref);
}
@@ -2231,7 +2231,7 @@ static void mport_mm_close(struct vm_area_struct *vma)
{
struct rio_mport_mapping *map = vma->vm_private_data;
-rmcd_debug(MMAP, "0x%pad", &map->phys_addr);
+ rmcd_debug(MMAP, "%pad", &map->phys_addr);
mutex_lock(&map->md->buf_mutex);
kref_put(&map->ref, mport_release_mapping);
mutex_unlock(&map->md->buf_mutex);
diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c
index b5b4556..4c20e99 100644
--- a/drivers/rapidio/devices/tsi721.c
+++ b/drivers/rapidio/devices/tsi721.c
@@ -1101,7 +1101,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
ibw_start = lstart & ~(ibw_size - 1);
tsi_debug(IBW, &priv->pdev->dev,
- "Direct (RIO_0x%llx -> PCIe_0x%pad), size=0x%x, ibw_start = 0x%llx",
+ "Direct (RIO_0x%llx -> PCIe_%pad), size=0x%x, ibw_start = 0x%llx",
rstart, &lstart, size, ibw_start);
while ((lstart + size) > (ibw_start + ibw_size)) {
@@ -1120,7 +1120,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
} else {
tsi_debug(IBW, &priv->pdev->dev,
- "Translated (RIO_0x%llx -> PCIe_0x%pad), size=0x%x",
+ "Translated (RIO_0x%llx -> PCIe_%pad), size=0x%x",
rstart, &lstart, size);
if (!is_power_of_2(size) || size < 0x1000 ||
@@ -1215,7 +1215,7 @@ static int tsi721_rio_map_inb_mem(struct rio_mport *mport, dma_addr_t lstart,
priv->ibwin_cnt--;
tsi_debug(IBW, &priv->pdev->dev,
- "Configured IBWIN%d (RIO_0x%llx -> PCIe_0x%pad), size=0x%llx",
+ "Configured IBWIN%d (RIO_0x%llx -> PCIe_%pad), size=0x%llx",
i, ibw_start, &loc_start, ibw_size);
return 0;
@@ -1237,7 +1237,7 @@ static void tsi721_rio_unmap_inb_mem(struct rio_mport *mport,
int i;
tsi_debug(IBW, &priv->pdev->dev,
- "Unmap IBW mapped to PCIe_0x%pad", &lstart);
+ "Unmap IBW mapped to PCIe_%pad", &lstart);
/* Search for matching active inbound translation window */
for (i = 0; i < TSI721_IBWIN_NUM; i++) {
--
2.6.3.368.gf34be46
next reply other threads:[~2016-03-05 7:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-05 7:46 Joe Perches [this message]
2016-03-05 10:02 ` Mauro Carvalho Chehab
2016-03-07 9:52 ` Nicolas Ferre
2016-03-07 12:39 ` Bounine, Alexandre
2016-03-07 14:50 ` Vinod Koul
2016-03-07 16:08 ` Ross Zwisler
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dcdebc08a17023fac93595312281cb8e91185668.1457162650.git.joe@perches.com \
--to=joe@perches.com \
--cc=alexandre.bounine@idt.com \
--cc=bparrot@ti.com \
--cc=dan.j.williams@intel.com \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-nvdimm@ml01.01.org \
--cc=mchehab@osg.samsung.com \
--cc=mporter@kernel.crashing.org \
--cc=nicolas.ferre@atmel.com \
--cc=ross.zwisler@linux.intel.com \
--cc=trivial@kernel.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®