fglrx

["Justin Mattock" <justinmattock@gmail.com>]

Hello;  bob knight
thank you again for helping me out with fglrx, The build did worked
this time, I received an invalid lvalue with cap_t, but was able to
carry through with just using an old capability.h file.
As for the change_page_attr (I dont think I would of ever gotten that)
nice work; here is what dmesg says:

[    8.823442] Symbol init_mm is marked as UNUSED, however this module
is using it.
[    8.823446] This symbol will go away in the future.
[    8.823448] Please evalute if this is the right api to use, and if
it really is, submit a report the linux kernel mailinglist together
with submitting your code for inclusion.
[    8.842105] [fglrx] Maximum main memory to use for locked dma
buffers: 913 MBytes.
[    8.842133] [fglrx] ASYNCIO init succeed!
[    8.843985] [fglrx] PAT is enabled successfully!
[    8.844006] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[   54.527129] [fglrx] Reserve Block - 0 offset =  0X7ffb000 length = 0X5000
[   54.527135] [fglrx] Reserve Block - 1 offset =  0X0 length = 0X1000000
[   54.527138] [fglrx] Reserve Block - 2 offset =  0X7fbb000 length = 0X40000
[   54.785599] [fglrx] interrupt source 20008000 successfully enabled
[   54.785599] [fglrx] enable ID = 0x00000008
[   54.785599] [fglrx] Receive enable interrupt message with
irqEnableMask: 20008000
[   54.785599] [fglrx] interrupt source 10000000 successfully enabled
[   54.785599] [fglrx] enable ID = 0x00000009
[   54.785599] [fglrx] Receive enable interrupt message with
irqEnableMask: 10000000

I looked on google but didnt find much about init_mm
I'll paste what you gave me on the mactel site so anybody who needs
fglrx on 2.6.25 can get it working to somewhat of an extent.
regards;


-- 
Justin P. Mattock