[ INFO: iconsistent lock state ]

["Justin Mattock" <justinmattock@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 149 bytes --]

attached is dmesg of [ INFO: inconsistent lock state ]
whenever I use the boot option nohz=off this does not appear.
regards;

-- 
Justin P. Mattock

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 51064 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 2.6.25-04569-gb69d398 (root@unix) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #3 SMP Thu Apr 24 23:46:48 UTC 2008
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable)
[    0.000000]  BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[    0.000000] x86: PAT support disabled.
[    0.000000] 112MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   258282
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   258282
[    0.000000] On node 0 totalpages: 258282
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4060 pages, LIFO batch:0
[    0.000000]   Normal zone: 1980 pages used for memmap
[    0.000000]   Normal zone: 223300 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 28652 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.4 present.
[    0.000000] Using APIC driver default
[    0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[    0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE   Apple00       A5       1000013)
[    0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE   Apple00       A5 Loki       5F)
[    0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE  MacBookP    20002 INTL 20050309)
[    0.000000] ACPI: FACS 3FEC0000, 0040
[    0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE   Apple00        1 Loki       5F)
[    0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE     CpuPm     3000 INTL 20050309)
[    0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe  SataPri     1000 INTL 20050309)
[    0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe  SataSec     1000 INTL 20050309)
[    0.000000] ACPI: DMI detected: Apple
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1 already used, trying 2
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 343216 bytes of per cpu data
[    0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 256012
[    0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=0 apic=verbose acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0
[    0.000000] audit: enabled (after initialization)
[    0.000000] ACPI: Added _OSI(Linux)
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Detected 2161.318 MHz processor.
[    0.003333] Console: colour dummy device 80x25
[    0.003333] console [tty0] enabled
[    0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.003333] ... MAX_LOCKDEP_SUBCLASSES:    8
[    0.003333] ... MAX_LOCK_DEPTH:          48
[    0.003333] ... MAX_LOCKDEP_KEYS:        2048
[    0.003333] ... CLASSHASH_SIZE:           1024
[    0.003333] ... MAX_LOCKDEP_ENTRIES:     8192
[    0.003333] ... MAX_LOCKDEP_CHAINS:      16384
[    0.003333] ... CHAINHASH_SIZE:          8192
[    0.003333]  memory used by lock dependency info: 1024 kB
[    0.003333]  per task-struct memory footprint: 2688 bytes
[    0.003333] ------------------------
[    0.003333] | Locking API testsuite:
[    0.003333] ----------------------------------------------------------------------------
[    0.003333]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]               recursive read-lock:             |  ok  |             |  ok  |
[    0.003333]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.003333]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.003333]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.003333]   --------------------------------------------------------------------------
[    0.003333]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.003333]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.003333]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.003333]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.003333]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.003333]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.003333]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.003333]       hard-irq read-recursion/123:  ok  |
[    0.003333]       soft-irq read-recursion/123:  ok  |
[    0.003333]       hard-irq read-recursion/132:  ok  |
[    0.003333]       soft-irq read-recursion/132:  ok  |
[    0.003333]       hard-irq read-recursion/213:  ok  |
[    0.003333]       soft-irq read-recursion/213:  ok  |
[    0.003333]       hard-irq read-recursion/231:  ok  |
[    0.003333]       soft-irq read-recursion/231:  ok  |
[    0.003333]       hard-irq read-recursion/312:  ok  |
[    0.003333]       soft-irq read-recursion/312:  ok  |
[    0.003333]       hard-irq read-recursion/321:  ok  |
[    0.003333]       soft-irq read-recursion/321:  ok  |
[    0.003333] -------------------------------------------------------
[    0.003333] Good, all 218 testcases passed! |
[    0.003333] ---------------------------------
[    0.003333] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.003333] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.003333] Memory: 1014420k/1033128k available (2655k kernel code, 18044k reserved, 1345k data, 628k init, 115624k highmem)
[    0.003333] virtual kernel memory layout:
[    0.003333]     fixmap  : 0xfff7d000 - 0xfffff000   ( 520 kB)
[    0.003333]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.003333]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[    0.003333]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[    0.003333]       .init : 0xc04f0000 - 0xc058d000   ( 628 kB)
[    0.003333]       .data : 0xc0397d70 - 0xc04e8190   (1345 kB)
[    0.003333]       .text : 0xc0100000 - 0xc0397d70   (2655 kB)
[    0.003333] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.003333] CPA: page pool initialized 16 of 16 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.083333] Calibrating delay using timer specific routine.. 4330.57 BogoMIPS (lpj=7215323)
[    0.083440] Security Framework initialized
[    0.083444] SELinux:  Initializing.
[    0.083515] SELinux:  Starting in permissive mode
[    0.083533] selinux_register_security:  Registering secondary module capability
[    0.083535] Capability LSM initialized as secondary
[    0.083590] Mount-cache hash table entries: 512
[    0.084694] Initializing cgroup subsys debug
[    0.084702] Initializing cgroup subsys ns
[    0.084711] Initializing cgroup subsys cpuacct
[    0.084716] Initializing cgroup subsys memory
[    0.084736] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.084739] CPU: L2 cache: 4096K
[    0.084741] CPU: Physical Processor ID: 0
[    0.084743] CPU: Processor Core ID: 0
[    0.084746] Intel machine check architecture supported.
[    0.084749] Intel machine check reporting enabled on CPU#0.
[    0.084752] using mwait in idle threads.
[    0.084756] Compat vDSO mapped to ffffe000.
[    0.084765] Checking 'hlt' instruction... OK.
[    0.098202] ACPI: Core revision 20070126
[    0.117889] enabled ExtINT on CPU#0
[    0.118105] ENABLING IO-APIC IRQs
[    0.118107] init IO_APIC IRQs
[    0.118109]  IO-APIC (apicid-pin) 2-0 not connected.
[    0.118196]  IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
[    0.118352] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.151416] CPU0: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
[    0.151420] Using local APIC timer interrupts.
[    0.151421] calibrating APIC timer ...
[    0.153323] ... lapic delta = 1039057
[    0.153323] ... PM timer delta = 357953
[    0.153323] ... PM timer result ok
[    0.153323] ..... delta 1039057
[    0.153323] ..... mult: 44630068
[    0.153323] ..... calibration result: 554163
[    0.153323] ..... CPU clock speed is 2161.1523 MHz.
[    0.153323] ..... host bus clock speed is 166.0885 MHz.
[    0.153323] lockdep: fixing up alternatives.
[    0.153323] Booting processor 1/1 ip 6000
[    0.159982] Initializing CPU#1
[    0.159982] masked ExtINT on CPU#1
[    0.239978] Calibrating delay using timer specific routine.. 4324.62 BogoMIPS (lpj=7204194)
[    0.243311] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.243311] CPU: L2 cache: 4096K
[    0.243311] CPU: Physical Processor ID: 0
[    0.243311] CPU: Processor Core ID: 1
[    0.243311] Intel machine check architecture supported.
[    0.243311] Intel machine check reporting enabled on CPU#1.
[    0.243311] x86: PAT support disabled.
[    0.244675] CPU1: Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
[    0.244686] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.246688] Brought up 2 CPUs
[    0.246692] Total of 2 processors activated (8655.19 BogoMIPS).
[    0.246741] CPU0 attaching sched-domain:
[    0.246744]  domain 0: span 0-1
[    0.246746]   groups: 0 1
[    0.246753] CPU1 attaching sched-domain:
[    0.246756]  domain 0: span 0-1
[    0.246758]   groups: 1 0
[    0.247982] net_namespace: 564 bytes
[    0.248023] Booting paravirtualized kernel on bare hardware
[    0.249997] NET: Registered protocol family 16
[    0.251021] No dock devices found.
[    0.251637] EISA bus registered
[    0.251655] ACPI: bus type pci registered
[    0.252050] PCI: Using MMCONFIG for extended config space
[    0.252053] PCI: Using configuration type 1
[    0.252055] Setting up standard PCI resources
[    0.263484] ACPI: EC: EC description table is found, configuring boot EC
[    0.265015] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.274361] ACPI: BIOS _OSI(Linux) query honored via cmdline
[    0.274945] ACPI: Interpreter enabled
[    0.274948] ACPI: (supports S0 S3 S4 S5)
[    0.275031] ACPI: Using IOAPIC for interrupt routing
[    0.307627] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.307630] ACPI: EC: driver started in poll mode
[    0.310644] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.312392] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.312399] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[    0.314182] PCI: Transparent bridge - 0000:00:1e.0
[    0.314263] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.316143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[    0.316738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.317304] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.317869] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.318473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.345399] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.345661] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.345920] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.346177] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.346432] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.346703] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.346959] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.347241] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.348249] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.348405] pnp: PnP ACPI: disabled
[    0.349335] SCSI subsystem initialized
[    0.349536] libata version 3.00 loaded.
[    0.350095] usbcore: registered new interface driver usbfs
[    0.350402] usbcore: registered new interface driver hub
[    0.350618] usbcore: registered new device driver usb
[    0.351970] PCI: Using ACPI for IRQ routing
[    0.351972] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[    0.351991] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.351999] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.352010] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[    0.352020] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.352027] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.352037] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.352047] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[    0.352057] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[    0.352065] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.352072] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[    0.352080] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[    0.352095] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    0.352102] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    0.352109] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[    0.352117] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.352124] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.352132] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.352139] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[    0.352146] number of MP IRQ sources: 15.
[    0.352148] number of IO-APIC #2 registers: 24.
[    0.352150] testing the IO APIC.......................
[    0.352159] IO APIC #2......
[    0.352160] .... register #00: 02000000
[    0.352162] .......    : physical APIC id: 02
[    0.352164] .......    : Delivery Type: 0
[    0.352165] .......    : LTS          : 0
[    0.352167] .... register #01: 00170020
[    0.352169] .......     : max redirection entries: 0017
[    0.352170] .......     : PRQ implemented: 0
[    0.352172] .......     : IO APIC version: 0020
[    0.352174] .... IRQ redirection table:
[    0.352175]  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
[    0.352181]  00 000 00  1    0    0   0   0    0    0    00
[    0.352188]  01 003 03  0    0    0   0   0    1    1    39
[    0.352195]  02 003 03  0    0    0   0   0    1    1    31
[    0.352202]  03 003 03  0    0    0   0   0    1    1    41
[    0.352209]  04 003 03  0    0    0   0   0    1    1    49
[    0.352216]  05 003 03  0    0    0   0   0    1    1    51
[    0.352222]  06 003 03  0    0    0   0   0    1    1    59
[    0.352229]  07 003 03  0    0    0   0   0    1    1    61
[    0.352236]  08 003 03  0    0    0   0   0    1    1    69
[    0.352243]  09 003 03  0    1    0   0   0    1    1    71
[    0.352249]  0a 003 03  0    0    0   0   0    1    1    79
[    0.352256]  0b 003 03  0    0    0   0   0    1    1    81
[    0.352263]  0c 003 03  0    0    0   0   0    1    1    89
[    0.352270]  0d 003 03  0    0    0   0   0    1    1    91
[    0.352276]  0e 003 03  0    0    0   0   0    1    1    99
[    0.352283]  0f 003 03  0    0    0   0   0    1    1    A1
[    0.352290]  10 003 03  1    1    0   1   0    1    1    A9
[    0.352297]  11 003 03  1    1    0   1   0    1    1    B9
[    0.352304]  12 003 03  1    1    0   1   0    1    1    C1
[    0.352311]  13 003 03  1    1    0   1   0    1    1    D1
[    0.352318]  14 000 00  1    0    0   0   0    0    0    00
[    0.352324]  15 000 00  1    0    0   0   0    0    0    00
[    0.352331]  16 003 03  1    1    0   1   0    1    1    B1
[    0.352338]  17 003 03  1    1    0   1   0    1    1    C9
[    0.352341] IRQ to pin mappings:
[    0.352343] IRQ0 -> 0:2
[    0.352345] IRQ1 -> 0:1
[    0.352348] IRQ3 -> 0:3
[    0.352350] IRQ4 -> 0:4
[    0.352353] IRQ5 -> 0:5
[    0.352355] IRQ6 -> 0:6
[    0.352358] IRQ7 -> 0:7
[    0.352360] IRQ8 -> 0:8
[    0.352363] IRQ9 -> 0:9
[    0.352365] IRQ10 -> 0:10
[    0.352368] IRQ11 -> 0:11
[    0.352370] IRQ12 -> 0:12
[    0.352373] IRQ13 -> 0:13
[    0.352375] IRQ14 -> 0:14
[    0.352378] IRQ15 -> 0:15
[    0.352381] IRQ16 -> 0:16
[    0.352383] IRQ17 -> 0:17
[    0.352386] IRQ18 -> 0:18
[    0.352388] IRQ19 -> 0:19
[    0.352391] IRQ22 -> 0:22
[    0.352393] IRQ23 -> 0:23
[    0.352396] .................................... done.
[    0.360202] NetLabel: Initializing
[    0.360204] NetLabel:  domain hash size = 128
[    0.360206] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.360313] NetLabel:  unlabeled traffic allowed by default
[    0.360323] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.360328] hpet0: 3 64-bit timers, 14318180 Hz
[    0.399168] PCI: Bridge: 0000:00:01.0
[    0.399172]   IO window: 3000-3fff
[    0.399179]   MEM window: 0x50300000-0x503fffff
[    0.399185]   PREFETCH window: 0x0000000040000000-0x0000000047ffffff
[    0.399195] PCI: Bridge: 0000:00:1c.0
[    0.399199]   IO window: 2000-2fff
[    0.399208]   MEM window: 0x50200000-0x502fffff
[    0.399215]   PREFETCH window: 0x0000000050500000-0x00000000505fffff
[    0.399226] PCI: Bridge: 0000:00:1c.1
[    0.399228]   IO window: disabled.
[    0.399237]   MEM window: 0x50100000-0x501fffff
[    0.399243]   PREFETCH window: disabled.
[    0.399254] PCI: Bridge: 0000:00:1c.2
[    0.399258]   IO window: 1000-1fff
[    0.399267]   MEM window: 0x4c100000-0x500fffff
[    0.399274]   PREFETCH window: 0x0000000048000000-0x000000004bffffff
[    0.399286] PCI: Bridge: 0000:00:1e.0
[    0.399287]   IO window: disabled.
[    0.399296]   MEM window: 0x4c000000-0x4c0fffff
[    0.399302]   PREFETCH window: disabled.
[    0.399335] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[    0.399343] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.399383] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[    0.399392] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.399432] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[    0.399440] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.399481] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[    0.399489] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.399510] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.399531] NET: Registered protocol family 2
[    0.410157] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.410935] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.411818] TCP bind hash table entries: 65536 (order: 9, 2359296 bytes)
[    0.419456] TCP: Hash tables configured (established 131072 bind 65536)
[    0.419482] TCP reno registered
[    0.423512] NET: Registered protocol family 1
[    0.427441] IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
[    0.430684] Initializing RT-Tester: OK
[    0.430852] audit: initializing netlink socket (enabled)
[    0.430931] type=2000 audit(1209081460.429:1): initialized
[    0.431538] highmem bounce pool size: 64 pages
[    0.431545] Total HugeTLB memory allocated, 0
[    0.459699] fuse init (API version 7.9)
[    0.461211] SELinux:  Registering netfilter hooks
[    0.461993] io scheduler noop registered
[    0.462531] io scheduler cfq registered (default)
[    0.462722] pci 0000:01:00.0: Boot video device
[    0.463434] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k
[    0.463437] vesafb: mode is 1024x768x8, linelength=1024, pages=18
[    0.463440] vesafb: protected mode interface info at c000:ad0c
[    0.463442] vesafb: pmi: set display start = c00cad94, set palette = c00cae50
[    0.463444] vesafb: scrolling: redraw
[    0.463446] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
[    0.477317] Console: switching to colour frame buffer device 128x48
[    0.489397] fb0: VESA VGA frame buffer device
[    0.489661] power_supply ADP1: uevent
[    0.489664] power_supply ADP1: No power supply yet
[    0.489976] power_supply ADP1: power_supply_changed
[    0.489987] ACPI: AC Adapter [ADP1] (on-line)
[    0.490296] power_supply ADP1: power_supply_changed_work
[    0.490307] power_supply ADP1: power_supply_update_gen_leds 1
[    0.490335] power_supply ADP1: uevent
[    0.490337] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[    0.490344] power_supply ADP1: Static prop TYPE=Mains
[    0.490347] power_supply ADP1: 1 dynamic props
[    0.490350] power_supply ADP1: prop ONLINE=1
[    0.491603] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.501336] Switched to high resolution mode on CPU 1
[    0.503314] Switched to high resolution mode on CPU 0
[    0.602776] power_supply BAT0: uevent
[    0.602779] power_supply BAT0: No power supply yet
[    0.602963] power_supply BAT0: power_supply_changed
[    0.603163] power_supply BAT0: power_supply_changed_work
[    0.636543] ACPI: Battery Slot [BAT0] (battery present)
[    0.659618] hpet_resources: 0xfed00000 is busy
[    0.662185] loop: module loaded
[    0.662204] kgdb: Registered I/O driver kgdbts.
[    0.662356] kgdbts:RUN plant and detach test
[    0.662429] kgdbts:RUN sw breakpoint test
[    0.662499] kgdbts:RUN bad memory access test
[    0.662546] kgdbts:RUN singlestep breakpoint test
[    0.662647] kgdbts:RUN hw breakpoint test
[    0.662710] kgdbts:RUN hw write breakpoint test
[    0.662773] kgdbts:RUN access write breakpoint test
[    0.662836] kgdbts:RUN do_fork for 100 breakpoints
[    0.663017] Linux video capture interface: v2.00
[    0.663528] input: Macintosh mouse button emulation as /class/input/input0
[    0.664423] Driver 'sd' needs updating - please use bus_type methods
[    0.664656] Driver 'sr' needs updating - please use bus_type methods
[    0.665508] ata_piix 0000:00:1f.1: version 2.12
[    0.665527] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[    0.665628] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    0.666847] scsi0 : ata_piix
[    0.667327] power_supply BAT0: power_supply_update_bat_leds 4
[    0.667347] power_supply BAT0: uevent
[    0.667348] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    0.667353] power_supply BAT0: Static prop TYPE=Battery
[    0.667357] power_supply BAT0: 12 dynamic props
[    0.667360] power_supply BAT0: prop STATUS=Full
[    0.667365] power_supply BAT0: prop PRESENT=1
[    0.667370] power_supply BAT0: prop TECHNOLOGY=Unknown
[    0.667374] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    0.667378] power_supply BAT0: prop VOLTAGE_NOW=12460000
[    0.667383] power_supply BAT0: prop CURRENT_NOW=0
[    0.667387] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    0.667391] power_supply BAT0: prop ENERGY_FULL=53260000
[    0.667395] power_supply BAT0: prop ENERGY_NOW=51630000
[    0.667399] power_supply BAT0: prop MODEL_NAME=ASMB012
[    0.667403] power_supply BAT0: prop MANUFACTURER=SMPN012
[    0.667407] power_supply BAT0: prop SERIAL_NUMBER=
[    0.667644] scsi1 : ata_piix
[    0.669609] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14
[    0.669612] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15
[    0.690996] ata1.00: ATAPI: MATSHITADVD-R   UJ-857D, KCV9, max UDMA/66
[    0.704215] ata1.00: configured for UDMA/66
[    0.990944] scsi 0:0:0:0: CD-ROM            MATSHITA DVD-R   UJ-857D  KCV9 PQ: 0 ANSI: 5
[    0.995867] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    0.995871] Uniform CD-ROM driver Revision: 3.20
[    0.996360] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    0.996937] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    0.997034] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[    0.997042] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
[    1.015177] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    1.147605] scsi2 : ata_piix
[    1.148053] scsi3 : ata_piix
[    1.153976] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19
[    1.153979] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19
[    1.330988] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100
[    1.330991] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.344295] ata3.01: configured for UDMA/100
[    1.471830] scsi 2:0:1:0: Direct-Access     ATA      FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5
[    1.479181] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    1.479227] sd 2:0:1:0: [sda] Write Protect is off
[    1.479230] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.479315] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.479879] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[    1.479925] sd 2:0:1:0: [sda] Write Protect is off
[    1.479928] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.480014] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.480041]  sda: sda1 sda2 < sda5 >
[    1.482382] sd 2:0:1:0: [sda] Attached SCSI disk
[    1.482861] sd 2:0:1:0: Attached scsi generic sg1 type 0
[    1.483322] usbcore: registered new interface driver usblcd
[    1.483530] usbcore: registered new interface driver usbled
[    1.484381] PNP: No PS/2 controller found. Probing ports directly.
[    1.485266] i8042.c: No controller found.
[    1.489203] mice: PS/2 mouse device common for all mice
[    1.490530] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[    1.490533] EDAC MC: Ver: 2.1.0 Apr 24 2008
[    1.491554] cpuidle: using governor ladder
[    1.491558] cpuidle: using governor menu
[    1.491777] usbcore: registered new interface driver hiddev
[    1.492047] usbcore: registered new interface driver usbhid
[    1.492054] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    1.492307] Advanced Linux Sound Architecture Driver Version 1.0.16.
[    1.492309] ALSA device list:
[    1.492311]   No soundcards found.
[    1.492711] oprofile: using NMI interrupt.
[    1.494580] IPVS: Registered protocols (TCP, AH, ESP)
[    1.494928] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[    1.494973] IPVS: ipvs loaded.
[    1.494975] Initializing XFRM netlink socket
[    1.495004] NET: Registered protocol family 17
[    1.495028] NET: Registered protocol family 15
[    1.495038] Using IPI No-Shortcut mode
[    1.499695] kjournald starting.  Commit interval 5 seconds
[    1.499895] EXT3-fs: mounted filesystem with ordered data mode.
[    1.499994] VFS: Mounted root (ext3 filesystem) readonly.
[    1.500067] debug: unmapping init memory c04f0000..c058d000
[    2.176870] SELinux: 8192 avtab hash slots, 205835 rules.
[    2.323767] SELinux: 8192 avtab hash slots, 205835 rules.
[    2.522185] SELinux:  7 users, 7 roles, 3017 types, 90 bools
[    2.522190] SELinux:  72 classes, 205835 rules
[    2.529399] SELinux:  Completing initialization.
[    2.529402] SELinux:  Setting up existing superblocks.
[    2.536933] SELinux: initialized (dev sda1, type ext3), uses xattr
[    2.651700] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[    2.651924] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[    2.652032] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[    2.652123] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[    2.676627] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[    2.676714] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    2.676826] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
[    2.676923] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[    2.677012] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[    2.677113] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[    2.677222] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[    2.677326] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[    2.677497] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[    2.677593] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[    2.677713] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[    2.703134] SELinux: policy loaded with handle_unknown=deny
[    2.703171] type=1403 audit(1209081462.740:2): policy loaded auid=4294967295 ses=4294967295
[    3.759285] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    3.768087] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    5.091143] kgdb: Unregistered I/O driver kgdbts, debugger disabled.
[    8.686386] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[    8.966980] power_supply ADP1: uevent
[    8.966983] power_supply ADP1: POWER_SUPPLY_NAME=ADP1
[    8.966990] power_supply ADP1: Static prop TYPE=Mains
[    8.966995] power_supply ADP1: 1 dynamic props
[    8.966998] power_supply ADP1: prop ONLINE=1
[    8.969506] power_supply BAT0: uevent
[    8.969508] power_supply BAT0: POWER_SUPPLY_NAME=BAT0
[    8.969513] power_supply BAT0: Static prop TYPE=Battery
[    8.969517] power_supply BAT0: 12 dynamic props
[    9.020810] power_supply BAT0: prop STATUS=Full
[    9.020817] power_supply BAT0: prop PRESENT=1
[    9.020823] power_supply BAT0: prop TECHNOLOGY=Unknown
[    9.020827] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000
[    9.020831] power_supply BAT0: prop VOLTAGE_NOW=12460000
[    9.020834] power_supply BAT0: prop CURRENT_NOW=0
[    9.020838] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000
[    9.020842] power_supply BAT0: prop ENERGY_FULL=53260000
[    9.020846] power_supply BAT0: prop ENERGY_NOW=51630000
[    9.020850] power_supply BAT0: prop MODEL_NAME=ASMB012
[    9.020853] power_supply BAT0: prop MANUFACTURER=SMPN012
[    9.020857] power_supply BAT0: prop SERIAL_NUMBER=
[   10.767156] input: Power Button (FF) as /class/input/input1
[   10.787213] ACPI: Power Button (FF) [PWRF]
[   10.787648] input: Lid Switch as /class/input/input2
[   10.787799] ACPI: Lid Switch [LID0]
[   10.787985] input: Power Button (CM) as /class/input/input3
[   10.818856] ACPI: Power Button (CM) [PWRB]
[   10.819071] input: Sleep Button (CM) as /class/input/input4
[   10.850810] ACPI: Sleep Button (CM) [SLPB]
[   11.081744] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE   Cpu0Ist     3000 INTL 20050309)
[   11.083278] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE   Cpu0Cst     3001 INTL 20050309)
[   11.084799] Monitor-Mwait will be used to enter C-1 state
[   11.084803] Monitor-Mwait will be used to enter C-2 state
[   11.084807] Monitor-Mwait will be used to enter C-3 state
[   11.085422] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[   11.085613] ACPI: ACPI0007:00 is registered as cooling_device0
[   11.085626] ACPI: Processor [CPU0] (supports 8 throttling states)
[   11.086905] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE   Cpu1Ist     3000 INTL 20050309)
[   11.088386] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE   Cpu1Cst     3000 INTL 20050309)
[   11.167923] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[   11.168028] ACPI: ACPI0007:01 is registered as cooling_device1
[   11.168044] ACPI: Processor [CPU1] (supports 8 throttling states)
[   11.170821] input: Video Bus as /class/input/input5
[   11.208162] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   11.230535] Linux agpgart interface v0.103
[   11.342216] USB Universal Host Controller Interface driver v3.0
[   11.342501] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[   11.342519] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[   11.342524] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   11.344356] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[   11.345055] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[   11.345115] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080
[   11.346079] usb usb1: configuration #1 chosen from 1 choice
[   11.346380] hub 1-0:1.0: USB hub found
[   11.346511] hub 1-0:1.0: 2 ports detected
[   11.450990] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[   11.451009] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[   11.451015] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   11.451139] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[   11.451183] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060
[   11.451658] usb usb2: configuration #1 chosen from 1 choice
[   11.451758] hub 2-0:1.0: USB hub found
[   11.451781] hub 2-0:1.0: 2 ports detected
[   11.559212] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[   11.559234] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[   11.559239] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   11.559398] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[   11.559459] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040
[   11.560096] usb usb3: configuration #1 chosen from 1 choice
[   11.560198] hub 3-0:1.0: USB hub found
[   11.560219] hub 3-0:1.0: 2 ports detected
[   11.670477] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[   11.670494] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[   11.670499] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[   11.670606] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[   11.670685] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020
[   11.671111] usb usb4: configuration #1 chosen from 1 choice
[   11.671225] hub 4-0:1.0: USB hub found
[   11.671245] hub 4-0:1.0: 2 ports detected
[   11.694701] usb 1-2: new full speed USB device using uhci_hcd and address 2
[   11.776780] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[   11.776807] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[   11.776813] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   11.776941] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[   11.780888] ehci_hcd 0000:00:1d.7: debug port 1
[   11.780899] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[   11.780912] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400
[   11.863181] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   11.863643] usb usb5: configuration #1 chosen from 1 choice
[   11.863745] hub 5-0:1.0: USB hub found
[   11.863856] hub 5-0:1.0: 8 ports detected
[   11.874998] usb 1-2: unable to read config index 0 descriptor/all
[   11.875162] usb 1-2: can't read configurations, error -71
[   12.107733] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19
[   12.159526] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[4c004000-4c0047ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
[   12.813885] usb 5-4: new high speed USB device using ehci_hcd and address 3
[   12.908856] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[   12.908946] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   12.947394] hda_codec: STAC922x, Apple subsys_id=106b1e00
[   12.974968] usb 5-4: configuration #1 chosen from 1 choice
[   13.269748] Marking TSC unstable due to: TSC halts in idle.
[   13.269762] 
[   13.269763] =================================
[   13.270954] [ INFO: inconsistent lock state ]
[   13.271865] 2.6.25-04569-gb69d398 #3
[   13.272614] ---------------------------------
[   13.273521] inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
[   13.274745] swapper/0 [HC0[0]:SC0[0]:HE1:SE1] takes:
[   13.275787]  (&rq->rq_lock_key){++..}, at: [<c01208e9>] sched_clock_idle_wakeup_event+0x43/0x74
[   13.276859] {in-hardirq-W} state was registered at:
[   13.276859]   [<c01423d8>] __lock_acquire+0x419/0xb70
[   13.276859]   [<c0142bae>] lock_acquire+0x7f/0xa6
[   13.280188]   [<c0394132>] _spin_lock+0x1c/0x49
[   13.280188]   [<c0121c44>] scheduler_tick+0x43/0x1bd
[   13.280188]   [<c012d99f>] update_process_times+0x3d/0x49
[   13.283524]   [<c013daf6>] tick_periodic+0x66/0x72
[   13.283524]   [<c013db1b>] tick_handle_periodic+0x19/0x6a
[   13.283524]   [<c0105a87>] timer_interrupt+0x47/0x4e
[   13.286855]   [<c015cf64>] handle_IRQ_event+0x1a/0x4f
[   13.286855]   [<c015e3e9>] handle_level_irq+0x7f/0xca
[   13.286855]   [<c0105a27>] do_IRQ+0x71/0x8a
[   13.290190]   [<c01043fe>] common_interrupt+0x2e/0x34
[   13.290190]   [<c038bd6f>] calibrate_delay+0x8f/0x276
[   13.290190]   [<c04f0883>] start_kernel+0x27c/0x2f8
[   13.293520]   [<c04f0008>] __init_begin+0x8/0xa
[   13.293520]   [<ffffffff>] 0xffffffff
[   13.293520] irq event stamp: 253965
[   13.296856] hardirqs last  enabled at (253965): [<c0108069>] native_sched_clock+0xe7/0xff
[   13.296856] hardirqs last disabled at (253964): [<c0107fef>] native_sched_clock+0x6d/0xff
[   13.300190] softirqs last  enabled at (253958): [<c0129cea>] __do_softirq+0xf9/0xff
[   13.300190] softirqs last disabled at (253953): [<c0129d3d>] do_softirq+0x4d/0x79
[   13.303522] 
[   13.303522] other info that might help us debug this:
[   13.303522] no locks held by swapper/0.
[   13.303522] 
[   13.303522] stack backtrace:
[   13.306852] Pid: 0, comm: swapper Not tainted 2.6.25-04569-gb69d398 #3
[   13.336851]  [<c01409f9>] print_usage_bug+0x106/0x113
[   13.340185]  [<c0141823>] mark_lock+0x1ed/0x3a5
[   13.343519]  [<c014244d>] __lock_acquire+0x48e/0xb70
[   13.346852]  [<c0142bae>] lock_acquire+0x7f/0xa6
[   13.350185]  [<c01208e9>] ? sched_clock_idle_wakeup_event+0x43/0x74
[   13.353519]  [<c0394132>] _spin_lock+0x1c/0x49
[   13.360185]  [<c01208e9>] ? sched_clock_idle_wakeup_event+0x43/0x74
[   13.363518]  [<c01208e9>] sched_clock_idle_wakeup_event+0x43/0x74
[   13.366851]  [<f883919b>] acpi_idle_enter_bm+0x2b3/0x333 [processor]
[   13.370184]  [<c02e5ec1>] cpuidle_idle_call+0x63/0x92
[   13.373517]  [<c02e5e5e>] ? cpuidle_idle_call+0x0/0x92
[   13.380184]  [<c010257d>] cpu_idle+0xb6/0xd6
[   13.383517]  [<c0387071>] rest_init+0x49/0x4b
[   13.386850]  =======================
[   13.746969] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0019e3fffe2ad87e]
[   13.908965] usb 1-2: new full speed USB device using uhci_hcd and address 4
[   14.008693] Clocksource tsc unstable (delta = -192259833 ns)
[   14.105113] usb 1-2: configuration #1 chosen from 1 choice
[   14.122683] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6
[   14.152184] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[   14.171815] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7
[   14.187854] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2
[   14.467490] usb 3-2: new full speed USB device using uhci_hcd and address 2
[   14.652911] usb 3-2: configuration #1 chosen from 1 choice
[   14.672321] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2
[   14.977075] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   15.224317] usb 4-1: configuration #1 chosen from 1 choice
[   15.272181] input: HID 05ac:1000 as /class/input/input8
[   15.286213] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1
[   15.320322] input: HID 05ac:1000 as /class/input/input9
[   15.334877] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1
[   15.365332] appletouch: Geyser mode initialized.
[   15.370791] input: appletouch as /class/input/input10
[   15.439825] usbcore: registered new interface driver appletouch
[   15.675377] usb 5-4: USB disconnect, address 3
[   16.071446] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[   16.214553] applesmc: Apple MacBook Pro detected:
[   16.218315] applesmc:  - Model with accelerometer
[   16.231620] applesmc:  - Model with light sensors and backlight
[   16.240618] applesmc:  - Model with 12 temperature sensors
[   16.358731] applesmc: device successfully initialized (0xe0, 0x00).
[   16.358735] applesmc: device successfully initialized.
[   16.369144] applesmc: 2 fans found.
[   16.383592] input: applesmc as /class/input/input11
[   16.411909] Registered led device: smc::kbd_backlight
[   16.417313] applesmc: driver successfully loaded.
[   16.724341] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM chipsets
[   16.729798] intelfb: Version 0.9.4
[   16.862401] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.996418] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   17.101522] arp_tables: (C) 2002 David S. Miller
[   17.209549] ieee80211_crypt: registered algorithm 'NULL'
[   17.259115] ieee80211_crypt: registered algorithm 'TKIP'
[   17.402449] ipmi message handler version 39.1
[   17.442611] IPMI Watchdog: driver initialized
[   17.823337] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8.  Priority:-1 extents:1 across:2988048k
[   18.021390] EXT3 FS on sda1, internal journal
[   18.176381] usb 5-4: new high speed USB device using ehci_hcd and address 6
[   18.358555] usb 5-4: configuration #1 chosen from 1 choice
[   22.500853] appletouch: incomplete data package (first byte: 2, length: 4).
[   22.500875] drivers/input/mouse/appletouch.c: atp_complete - usb_submit_urb failed with result -1
[   24.593585] input: Pommed beeper device as /class/input/input12
[   24.864839] Bluetooth: Core ver 2.11
[   24.865664] NET: Registered protocol family 31
[   24.865668] Bluetooth: HCI device and connection manager initialized
[   24.865672] Bluetooth: HCI socket layer initialized
[   24.929632] Bluetooth: L2CAP ver 2.9
[   24.929636] Bluetooth: L2CAP socket layer initialized
[   25.030308] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   25.062256] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84
[   25.127751] Bluetooth: RFCOMM socket layer initialized
[   25.127776] Bluetooth: RFCOMM TTY layer initialized
[   25.127779] Bluetooth: RFCOMM ver 1.8
[   25.493270] usb 4-1: USB disconnect, address 2
[   25.880980] usb 4-1: new full speed USB device using uhci_hcd and address 3
[   26.158839] usb 4-1: configuration #1 chosen from 1 choice
[   26.369180] Bluetooth: HCI USB driver ver 2.9
[   26.373836] usbcore: registered new interface driver hci_usb
[   33.809420] input: Apple Computer, Inc. Mighty Mouse as /class/input/input13
[   35.545722] CPA self-test:
[   35.546134]  4k 8192 large 216 gb 0 x 8408[c0000000-f7fff000] miss 0
[   35.570533]  4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0
[   35.590530]  4k 194560 large 34 gb 0 x 194594[c0000000-f7fff000] miss 0
[   35.590537] ok.
[   51.844686] type=1400 audit(1209081504.512:3): avc:  denied  { read write } for  pid=2904 comm="modprobe" name="tty7" dev=tmpfs ino=2897 scontext=a-12:sysadm_r:insmod_t tcontext=system_u:object_r:tty_device_t tclass=chr_file
[   51.844917] type=1400 audit(1209081504.512:3): avc:  denied  { read write } for  pid=2904 comm="modprobe" path="socket:[8267]" dev=sockfs ino=8267 scontext=a-12:sysadm_r:insmod_t tcontext=a-12:sysadm_r:sysadm_xserver_t tclass=unix_stream_socket
[   51.845129] type=1300 audit(1209081504.512:3): arch=40000003 syscall=11 success=yes exit=0 a0=bf8efae8 a1=bf8eeaa8 a2=bf8f044c a3=2 items=0 ppid=2891 pid=2904 auid=4294967295 uid=0 gid=1000 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=4294967295 comm="modprobe" exe="/sbin/modprobe" subj=a-12:sysadm_r:insmod_t key=(null)