[ 0.000000] Linux version 2.6.26-rc5-00017-g1242292 (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #11 SMP Thu Jun 12 05:45:17 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 112MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 258282 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 258282 [ 0.000000] On node 0 totalpages: 258282 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 226 pages used for memmap [ 0.000000] HighMem zone: 28680 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] Using APIC driver default [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) [ 0.000000] ACPI: FACS 3FEC0000, 0040 [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0 [ 0.000000] audit: enabled (after initialization) [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 2161.309 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1018672k/1033128k available (2564k kernel code, 13840k reserved, 1315k data, 328k init, 115624k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.010000] .init : 0xc04cf000 - 0xc0521000 ( 328 kB) [ 0.010000] .data : 0xc038113d - 0xc04c9dac (1315 kB) [ 0.010000] .text : 0xc0100000 - 0xc038113d (2564 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.159747] Calibrating delay using timer specific routine.. 4327.95 BogoMIPS (lpj=21639750) [ 0.159837] Security Framework initialized [ 0.159849] SELinux: Initializing. [ 0.159872] SELinux: Starting in enforcing mode [ 0.159885] selinux_register_security: Registering secondary module capability [ 0.159898] Capability LSM initialized as secondary [ 0.159942] Mount-cache hash table entries: 512 [ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.160000] CPU: L2 cache: 4096K [ 0.160000] CPU: Physical Processor ID: 0 [ 0.160000] CPU: Processor Core ID: 0 [ 0.160000] Intel machine check architecture supported. [ 0.160000] Intel machine check reporting enabled on CPU#0. [ 0.160000] using mwait in idle threads. [ 0.160000] Checking 'hlt' instruction... OK. [ 0.200000] ACPI: Core revision 20080321 [ 0.227971] ENABLING IO-APIC IRQs [ 0.228195] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.328179] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.330000] Booting processor 1/1 ip 6000 [ 0.340000] Initializing CPU#1 [ 0.340000] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612947) [ 0.340000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.340000] CPU: L2 cache: 4096K [ 0.340000] CPU: Physical Processor ID: 0 [ 0.340000] CPU: Processor Core ID: 1 [ 0.340000] Intel machine check architecture supported. [ 0.340000] Intel machine check reporting enabled on CPU#1. [ 0.490000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.490000] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.490036] Brought up 2 CPUs [ 0.490046] Total of 2 processors activated (8650.53 BogoMIPS). [ 0.490080] CPU0 attaching sched-domain: [ 0.490090] domain 0: span 0-1 [ 0.490098] groups: 0 1 [ 0.490114] CPU1 attaching sched-domain: [ 0.490123] domain 0: span 0-1 [ 0.490131] groups: 1 0 [ 0.500000] net_namespace: 516 bytes [ 0.500000] Booting paravirtualized kernel on bare hardware [ 0.500000] NET: Registered protocol family 16 [ 0.500000] No dock devices found. [ 0.500000] EISA bus registered [ 0.500000] ACPI: bus type pci registered [ 0.500000] PCI: Using configuration type 1 for base access [ 0.500000] Setting up standard PCI resources [ 0.510000] ACPI: EC: EC description table is found, configuring boot EC [ 0.510000] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.530000] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.531624] ACPI: Interpreter enabled [ 0.531634] ACPI: (supports S0 S3 S4 S5) [ 0.531760] ACPI: Using IOAPIC for interrupt routing [ 0.580000] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.580000] ACPI: EC: driver started in interrupt mode [ 0.580000] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.580000] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.580000] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.580000] PCI: Transparent bridge - 0000:00:1e.0 [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.580000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.581000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.581989] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.585772] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.632749] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.632749] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.632749] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.632749] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.632749] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.632749] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.632749] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.632749] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.632749] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.632749] pnp: PnP ACPI: disabled [ 0.632749] SCSI subsystem initialized [ 0.632749] libata version 3.00 loaded. [ 0.632749] usbcore: registered new interface driver usbfs [ 0.632749] usbcore: registered new interface driver hub [ 0.632749] usbcore: registered new device driver usb [ 0.642749] PCI: Using ACPI for IRQ routing [ 0.642749] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 0.642749] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 0.642749] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.642749] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.642749] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.642749] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642749] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.642749] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.642749] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.642749] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642749] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.642749] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.642749] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.642749] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.662511] NetLabel: Initializing [ 0.662520] NetLabel: domain hash size = 128 [ 0.662528] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.662670] NetLabel: unlabeled traffic allowed by default [ 0.662688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.662704] hpet0: 3 64-bit timers, 14318180 Hz [ 0.671367] Switched to high resolution mode on CPU 0 [ 0.674077] Switched to high resolution mode on CPU 1 [ 0.715225] PCI: Bridge: 0000:00:01.0 [ 0.715225] IO window: 3000-3fff [ 0.715225] MEM window: 0x50300000-0x503fffff [ 0.715225] PREFETCH window: 0x0000000040000000-0x0000000047ffffff [ 0.715225] PCI: Bridge: 0000:00:1c.0 [ 0.715225] IO window: 2000-2fff [ 0.715225] MEM window: 0x50200000-0x502fffff [ 0.715225] PREFETCH window: 0x0000000050500000-0x00000000505fffff [ 0.715225] PCI: Bridge: 0000:00:1c.1 [ 0.715225] IO window: disabled. [ 0.715225] MEM window: 0x50100000-0x501fffff [ 0.715225] PREFETCH window: disabled. [ 0.715225] PCI: Bridge: 0000:00:1c.2 [ 0.715225] IO window: 1000-1fff [ 0.715225] MEM window: 0x4c100000-0x500fffff [ 0.715225] PREFETCH window: 0x0000000048000000-0x000000004bffffff [ 0.715225] PCI: Bridge: 0000:00:1e.0 [ 0.715225] IO window: disabled. [ 0.715225] MEM window: 0x4c000000-0x4c0fffff [ 0.715225] PREFETCH window: disabled. [ 0.715225] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.715225] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.715225] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.715225] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.715225] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.715225] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.715225] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.715225] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.715225] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.715225] NET: Registered protocol family 2 [ 0.745366] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.745905] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.746635] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.747609] TCP: Hash tables configured (established 131072 bind 65536) [ 0.747621] TCP reno registered [ 0.755470] NET: Registered protocol family 1 [ 0.775224] IA-32 Microcode Update Driver: v1.14a [ 0.775224] Initializing RT-Tester: OK [ 0.775224] audit: initializing netlink socket (enabled) [ 0.775224] type=2000 audit(1213250471.751:1): initialized [ 0.785225] highmem bounce pool size: 64 pages [ 0.785225] Total HugeTLB memory allocated, 0 [ 0.820404] fuse init (API version 7.9) [ 0.820404] msgmni has been set to 1764 for ipc namespace c04a3e80 [ 0.820404] SELinux: Registering netfilter hooks [ 0.820668] io scheduler noop registered [ 0.830174] io scheduler cfq registered (default) [ 0.830174] pci 0000:01:00.0: Boot video device [ 0.830174] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k [ 0.830174] vesafb: mode is 1024x768x8, linelength=1024, pages=18 [ 0.830174] vesafb: protected mode interface info at c000:ad0c [ 0.830174] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 [ 0.830174] vesafb: scrolling: redraw [ 0.830174] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.847140] Console: switching to colour frame buffer device 128x48 [ 0.860172] fb0: VESA VGA frame buffer device [ 0.860172] power_supply ADP1: uevent [ 0.860172] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 0.860172] power_supply ADP1: Static prop TYPE=Mains [ 0.860172] power_supply ADP1: 1 dynamic props [ 0.860172] power_supply ADP1: prop ONLINE=1 [ 0.860173] power_supply ADP1: power_supply_changed [ 0.860173] ACPI: AC Adapter [ADP1] (on-line) [ 0.860173] power_supply ADP1: power_supply_changed_work [ 0.860173] power_supply ADP1: power_supply_update_gen_leds 1 [ 0.860173] power_supply ADP1: uevent [ 0.860173] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 0.860173] power_supply ADP1: Static prop TYPE=Mains [ 0.860173] power_supply ADP1: 1 dynamic props [ 0.860173] power_supply ADP1: prop ONLINE=1 [ 0.869287] ACPI: Battery Slot [BAT0] (battery absent) [ 0.899266] hpet_resources: 0xfed00000 is busy [ 0.909267] loop: module loaded [ 0.909278] Linux video capture interface: v2.00 [ 0.914478] input: Macintosh mouse button emulation as /class/input/input0 [ 0.920436] Driver 'sd' needs updating - please use bus_type methods [ 0.925773] Driver 'sr' needs updating - please use bus_type methods [ 0.931630] ata_piix 0000:00:1f.1: version 2.12 [ 0.931630] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.940524] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.946094] scsi0 : ata_piix [ 0.957337] scsi1 : ata_piix [ 0.963469] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 0.963469] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 1.151574] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 [ 1.191513] ata1.00: configured for UDMA/66 [ 1.206602] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2 [ 1.380970] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 [ 1.395315] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.395315] Uniform CD-ROM driver Revision: 3.20 [ 1.409112] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.409112] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.409112] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.415731] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 1.575304] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.585277] scsi2 : ata_piix [ 1.595865] scsi3 : ata_piix [ 1.597416] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 [ 1.605278] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 [ 1.787593] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 1.787593] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.836842] ata3.01: configured for UDMA/100 [ 2.008144] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 2.008144] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.022994] sd 2:0:1:0: [sda] Write Protect is off [ 2.028585] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.034270] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.040290] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.050116] sd 2:0:1:0: [sda] Write Protect is off [ 2.055984] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.061976] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.068155] sda: sda1 sda2 < sda5 > [ 2.081002] sd 2:0:1:0: [sda] Attached SCSI disk [ 2.081002] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 2.095289] usbcore: registered new interface driver usblcd [ 2.101866] usbcore: registered new interface driver usbled [ 2.108023] PNP: No PS/2 controller found. Probing ports directly. [ 2.115969] i8042.c: No controller found. [ 2.135139] mice: PS/2 mouse device common for all mice [ 2.135139] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 2.145156] EDAC MC: Ver: 2.1.0 Jun 5 2008 [ 2.157423] cpuidle: using governor ladder [ 2.157423] cpuidle: using governor menu [ 2.167457] usbcore: registered new interface driver hiddev [ 2.178538] usbcore: registered new interface driver usbhid [ 2.178538] usbhid: v2.6:USB HID core driver [ 2.190828] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.190828] ALSA device list: [ 2.198525] No soundcards found. [ 2.210970] oprofile: using NMI interrupt. [ 2.210970] IPVS: Registered protocols (TCP, AH, ESP) [ 2.222191] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.228228] IPVS: ipvs loaded. [ 2.236523] Initializing XFRM netlink socket [ 2.242567] NET: Registered protocol family 17 [ 2.248524] NET: Registered protocol family 15 [ 2.254366] Using IPI No-Shortcut mode [ 2.268538] kjournald starting. Commit interval 5 seconds [ 2.266094] EXT3-fs: mounted filesystem with ordered data mode. [ 2.266094] VFS: Mounted root (ext3 filesystem) readonly. [ 2.266094] Freeing unused kernel memory: 328k freed [ 3.089302] SELinux: 8192 avtab hash slots, 205740 rules. [ 3.373913] SELinux: 8192 avtab hash slots, 205740 rules. [ 3.739319] SELinux: 7 users, 7 roles, 3017 types, 90 bools [ 3.743914] SELinux: 72 classes, 205740 rules [ 3.763395] SELinux: Completing initialization. [ 3.768974] SELinux: Setting up existing superblocks. [ 3.785288] SELinux: initialized (dev sda1, type ext3), uses xattr [ 3.874504] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.965622] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.965622] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 3.971268] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.976868] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 3.982382] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.987910] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.993548] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.999253] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 4.007910] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 4.013616] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 4.019280] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 4.024857] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 4.030365] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 4.082841] SELinux: policy loaded with handle_unknown=deny [ 4.090289] type=1403 audit(1213250474.960:2): policy loaded auid=4294967295 ses=4294967295 [ 5.275811] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 5.297281] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 11.224581] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 11.541652] power_supply ADP1: uevent [ 11.553649] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 11.563795] power_supply ADP1: Static prop TYPE=Mains [ 11.569666] power_supply ADP1: 1 dynamic props [ 11.575539] power_supply ADP1: prop ONLINE=1 [ 13.855810] input: Power Button (FF) as /class/input/input1 [ 13.906165] ACPI: Power Button (FF) [PWRF] [ 13.915146] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 13.922636] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 13.941084] Monitor-Mwait will be used to enter C-1 state [ 13.947001] Monitor-Mwait will be used to enter C-2 state [ 13.952751] Monitor-Mwait will be used to enter C-3 state [ 13.960407] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 13.965793] ACPI: ACPI0007:00 is registered as cooling_device0 [ 13.971532] ACPI: Processor [CPU0] (supports 8 throttling states) [ 13.977766] input: Lid Switch as /class/input/input2 [ 13.983752] ACPI: Lid Switch [LID0] [ 13.990508] input: Power Button (CM) as /class/input/input3 [ 14.035117] ACPI: Power Button (CM) [PWRB] [ 14.035117] input: Sleep Button (CM) as /class/input/input4 [ 14.087370] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 14.096120] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 14.120418] ACPI: Sleep Button (CM) [SLPB] [ 14.188290] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 14.194369] ACPI: ACPI0007:01 is registered as cooling_device1 [ 14.201163] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.258972] USB Universal Host Controller Interface driver v3.0 [ 14.264610] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 14.270651] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 14.280524] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 14.288973] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 14.295267] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 14.301841] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 14.308970] usb usb1: configuration #1 chosen from 1 choice [ 14.315332] hub 1-0:1.0: USB hub found [ 14.321884] hub 1-0:1.0: 2 ports detected [ 14.408354] input: Video Bus as /class/input/input5 [ 14.429725] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 14.435944] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 14.446201] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 14.452295] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 14.458350] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 14.468700] usb usb2: configuration #1 chosen from 1 choice [ 14.474294] hub 2-0:1.0: USB hub found [ 14.480323] hub 2-0:1.0: 2 ports detected [ 14.494093] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.593496] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 14.593496] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 14.603479] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 14.609830] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 14.616407] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 14.626638] usb usb3: configuration #1 chosen from 1 choice [ 14.632750] hub 3-0:1.0: USB hub found [ 14.639112] hub 3-0:1.0: 2 ports detected [ 14.695270] Marking TSC unstable due to: TSC halts in idle. [ 14.760255] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 14.760255] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 14.770237] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 14.780356] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 14.786767] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 14.793661] usb usb4: configuration #1 chosen from 1 choice [ 14.800283] hub 4-0:1.0: USB hub found [ 14.806713] hub 4-0:1.0: 2 ports detected [ 14.813068] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 14.920254] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 14.925233] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 14.987941] ath_hal: module license 'Proprietary' taints kernel. [ 15.005619] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) [ 15.021357] hda_codec: STAC922x, Apple subsys_id=106b1e00 [ 15.021357] usb 1-2: configuration #1 chosen from 1 choice [ 15.033500] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 15.110169] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 15.114601] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 15.124816] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.124816] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7 [ 15.140988] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.149636] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.164938] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.168534] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.173385] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 [ 15.187626] wlan: svn r3692 [ 15.260527] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 15.271188] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.271500] usb usb5: configuration #1 chosen from 1 choice [ 15.271631] hub 5-0:1.0: USB hub found [ 15.271654] hub 5-0:1.0: 8 ports detected [ 15.416154] ath_pci: svn r3692 [ 15.456168] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 15.519122] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 15.567827] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 15.574124] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 15.711389] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled. [ 15.719520] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled. [ 15.730951] MadWifi: ath_attach: Switching rfkill capability off. [ 15.887742] usb 1-2: USB disconnect, address 2 [ 15.909367] ath_rate_sample: 1.2 (svn r3692) [ 16.039550] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.049367] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 16.056150] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.066150] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.074565] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 16.082986] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 16.091295] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) [ 16.099626] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 16.106231] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 16.116232] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 16.124429] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 16.132467] wifi0: Use hw queue 4 for XR traffic [ 16.140325] wifi0: Use hw queue 7 for UAPSD traffic [ 16.145746] wifi0: Use hw queue 8 for CAB traffic [ 16.155748] wifi0: Use hw queue 9 for beacons [ 16.631192] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17 [ 16.887569] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e] [ 17.328442] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 17.479683] usb 5-4: configuration #1 chosen from 1 choice [ 18.051006] usbcore: registered new interface driver appletouch [ 18.332829] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 18.579430] usb 1-2: configuration #1 chosen from 1 choice [ 18.594708] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8 [ 18.634828] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 18.650365] appletouch: Geyser mode initialized. [ 18.651615] input: appletouch as /class/input/input9 [ 18.688715] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input10 [ 18.716983] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 19.029920] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 19.222871] usb 3-2: configuration #1 chosen from 1 choice [ 19.237996] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 [ 19.284168] Clocksource tsc unstable (delta = -311482197 ns) [ 19.525524] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 19.727361] usb 4-1: configuration #1 chosen from 1 choice [ 19.758767] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint [ 19.771205] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 19.784027] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 19.804606] input: Built-in iSight as /class/input/input11 [ 19.875298] usbcore: registered new interface driver uvcvideo [ 19.884711] USB Video Class driver (SVN r212) [ 20.582986] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 20.746584] applesmc: Apple MacBook Pro detected: [ 20.760798] applesmc: - Model with accelerometer [ 20.768735] applesmc: - Model with light sensors and backlight [ 20.775756] applesmc: - Model with 12 temperature sensors [ 20.784272] applesmc: device has already been initialized (0xe0, 0x00). [ 20.791300] applesmc: device successfully initialized. [ 20.798656] applesmc: 2 fans found. [ 20.806616] input: applesmc as /class/input/input12 [ 20.816618] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71 [ 20.813754] usb 5-4: USB disconnect, address 3 [ 20.870779] Registered led device: smc::kbd_backlight [ 20.870779] applesmc: driver successfully loaded. [ 20.894080] usb 5-4: usbfs: USBDEVFS_CONTROL failed cmd ift-load rqt 64 rq 160 len 1 ret -71 [ 20.939381] Linux agpgart interface v0.103 [ 21.026863] Symbol init_mm is marked as UNUSED, however this module is using it. [ 21.034750] This symbol will go away in the future. [ 21.042457] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [ 21.099652] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes. [ 21.112421] [fglrx] ASYNCIO init succeed! [ 21.123945] [fglrx] PAT is enabled successfully! [ 21.136085] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0 [ 21.566176] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.702905] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.769443] arp_tables: (C) 2002 David S. Miller [ 21.842609] ieee80211_crypt: registered algorithm 'NULL' [ 21.872228] ieee80211_crypt: registered algorithm 'TKIP' [ 22.032552] usbcore: registered new interface driver isight_firmware [ 22.088987] ipmi message handler version 39.2 [ 22.128610] IPMI Watchdog: driver initialized [ 22.373471] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k [ 22.583172] EXT3 FS on sda1, internal journal [ 22.846319] usb 5-4: new high speed USB device using ehci_hcd and address 6 [ 23.032778] usb 5-4: configuration #1 chosen from 1 choice [ 23.032778] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 23.049417] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 23.071214] input: Built-in iSight as /class/input/input13 [ 27.370941] appletouch: incomplete data package (first byte: 2, length: 4). [ 29.370251] input: Pommed beeper device as /class/input/input14 [ 29.636131] Bluetooth: Core ver 2.11 [ 29.654885] NET: Registered protocol family 31 [ 29.654885] Bluetooth: HCI device and connection manager initialized [ 29.654885] Bluetooth: HCI socket layer initialized [ 29.723116] Bluetooth: L2CAP ver 2.9 [ 29.723116] Bluetooth: L2CAP socket layer initialized [ 29.823473] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 29.860858] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 29.907328] Bluetooth: RFCOMM socket layer initialized [ 29.907328] Bluetooth: RFCOMM TTY layer initialized [ 29.907328] Bluetooth: RFCOMM ver 1.8 [ 30.217404] usb 4-1: USB disconnect, address 2 [ 30.515871] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 30.767818] usb 4-1: configuration #1 chosen from 1 choice [ 31.030575] Bluetooth: HCI USB driver ver 2.9 [ 31.037979] usbcore: registered new interface driver hci_usb [ 33.102759] CPA self-test: [ 33.102823] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0 [ 33.119333] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0 [ 33.141737] 4k 189440 large 39 gb 0 x 189479[c0000000-f7fff000] miss 0 [ 33.141744] ok. [ 38.848137] input: Apple Computer, Inc. Mighty Mouse as /class/input/input15 [ 42.947467] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 46.225847] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [ 46.225858] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 46.225864] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000 [ 46.367469] [fglrx] interrupt source 20008000 successfully enabled [ 46.367479] [fglrx] enable ID = 0x00000008 [ 46.367493] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 46.367682] [fglrx] interrupt source 10000000 successfully enabled [ 46.367687] [fglrx] enable ID = 0x00000009 [ 46.367697] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 290.071272] PM: Syncing filesystems ... done. [ 291.102146] Freezing user space processes ... (elapsed 0.17 seconds) done. [ 291.276098] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 291.276251] Suspending console(s) [ 291.363215] sd 2:0:1:0: [sda] Synchronizing SCSI cache [ 291.363431] sd 2:0:1:0: [sda] Stopping disk [ 292.336924] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 292.353620] [fglrx] firegl_gps_setpowerdown . [ 292.384507] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 292.393982] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 292.414009] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 292.414009] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 292.433416] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 292.433466] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 292.433513] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 292.433561] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 292.453376] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 292.652605] ACPI: Preparing to enter system sleep state S3 [ 292.752546] Disabling non-boot CPUs ... [ 292.752571] CPU0 attaching NULL sched-domain. [ 292.752575] CPU1 attaching NULL sched-domain. [ 292.869368] CPU 1 is now offline [ 292.869372] SMP alternatives: switching to UP code [ 292.890179] CPU0 attaching NULL sched-domain. [ 292.890827] CPU1 is down [ 292.890931] Extended CMOS year: 2000 [ 292.890931] Intel machine check architecture supported. [ 292.890937] Intel machine check reporting enabled on CPU#0. [ 292.890999] Back to C! [ 292.891290] Extended CMOS year: 2000 [ 292.891386] Enabling non-boot CPUs ... [ 292.891603] CPU0 attaching NULL sched-domain. [ 292.891836] SMP alternatives: switching to SMP code [ 292.901433] Booting processor 1/1 ip 6000 [ 292.909621] Initializing CPU#1 [ 293.049381] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612570) [ 293.049381] CPU: L1 I cache: 32K, L1 D cache: 32K [ 293.049381] CPU: L2 cache: 4096K [ 293.049381] CPU: Physical Processor ID: 0 [ 293.049381] CPU: Processor Core ID: 1 [ 293.049381] Intel machine check architecture supported. [ 293.049381] Intel machine check reporting enabled on CPU#1. [ 293.060072] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 293.060111] CPU0 attaching sched-domain: [ 293.060114] domain 0: span 0-1 [ 293.060115] groups: 0 1 [ 293.060120] CPU1 attaching sched-domain: [ 293.060122] domain 0: span 0-1 [ 293.060124] groups: 1 0 [ 293.049381] CPU1 is up [ 293.199386] Switched to high resolution mode on CPU 1 [ 293.844194] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 293.873763] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b) [ 293.873776] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0) [ 293.873783] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001) [ 293.873790] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030) [ 293.873798] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030) [ 293.873805] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) [ 293.873814] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040) [ 293.873822] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007) [ 293.873859] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 293.873868] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 293.873881] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b) [ 293.873899] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000) [ 293.873908] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002) [ 293.891076] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a) [ 293.891105] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004) [ 293.891144] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40) [ 293.891155] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) [ 293.891188] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 293.891199] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 294.071114] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051) [ 294.071123] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020) [ 294.071132] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020) [ 294.071147] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040) [ 294.071157] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007) [ 294.071218] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 294.071227] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 294.071261] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) [ 294.071270] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010) [ 294.071279] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0) [ 294.071293] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040) [ 294.071304] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007) [ 294.071362] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 294.071371] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 294.071405] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801) [ 294.071414] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10) [ 294.071423] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010) [ 294.071437] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040) [ 294.071448] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007) [ 294.071505] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 294.071514] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 294.071526] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 294.071537] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 294.071604] usb usb1: root hub lost power or was reset [ 294.071643] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 294.071654] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 294.071718] usb usb2: root hub lost power or was reset [ 294.071741] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 294.071752] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 294.071815] usb usb3: root hub lost power or was reset [ 294.071850] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 294.071860] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 294.071923] usb usb4: root hub lost power or was reset [ 294.090252] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 294.090263] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 294.090351] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) [ 294.090359] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00) [ 294.090368] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0) [ 294.090386] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007) [ 294.090417] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 294.090489] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b) [ 294.090523] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005) [ 294.090539] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 294.090548] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 294.110186] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b) [ 294.110221] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) [ 294.110248] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 294.110257] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 294.113653] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 294.113665] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 294.122529] [fglrx] firegl_gps_setpowerup . [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b) [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000) [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001) [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004) [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40) [ 294.127676] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007) [ 294.139817] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a) [ 294.140015] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004) [ 294.140025] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40) [ 294.140037] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007) [ 294.140085] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 294.140097] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 294.159906] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000) [ 294.159916] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000) [ 294.165525] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810) [ 294.165537] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016) [ 294.219086] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 294.223432] sd 2:0:1:0: [sda] Starting disk [ 294.287129] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 294.287134] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out [ 294.327031] ata1.00: configured for UDMA/66 [ 294.327959] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6 [ 294.331099] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0 [ 294.332026] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2 [ 294.828112] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 294.828118] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out [ 294.944626] ata3.01: configured for UDMA/100 [ 294.961260] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 294.961260] sd 2:0:1:0: [sda] Write Protect is off [ 294.961260] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 294.961260] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 295.809712] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 295.980239] appletouch: Geyser mode initialized. [ 296.117657] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 296.278619] applesmc: device has already been initialized (0xe0, 0x00). [ 296.476854] usb 4-1: reset full speed USB device using uhci_hcd and address 3 [ 296.546579] Restarting tasks ... <6>usb 4-1: USB disconnect, address 3 [ 296.698188] done. [ 296.754001] appletouch: incomplete data package (first byte: 2, length: 4). [ 297.690974] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 297.909457] usb 4-1: configuration #1 chosen from 1 choice [ 297.944435] input: HID 05ac:1000 as /class/input/input16 [ 297.993146] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 298.026199] input: HID 05ac:1000 as /class/input/input17 [ 298.030185] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 316.096198] end_request: I/O error, dev sr0, sector 84224 [ 316.096214] Buffer I/O error on device sr0, logical block 10528 [ 316.096709] Buffer I/O error on device sr0, logical block 10561 [ 316.096718] Buffer I/O error on device sr0, logical block 10562 [ 316.096726] Buffer I/O error on device sr0, logical block 10563 [ 316.096733] Buffer I/O error on device sr0, logical block 10564 [ 316.096740] Buffer I/O error on device sr0, logical block 10565 [ 316.096747] Buffer I/O error on device sr0, logical block 10566 [ 316.096754] Buffer I/O error on device sr0, logical block 10567 [ 316.096762] Buffer I/O error on device sr0, logical block 10568 [ 316.096769] Buffer I/O error on device sr0, logical block 10569 [ 491.250518] PM: Syncing filesystems ... done. [ 492.145390] Freezing user space processes ... (elapsed 0.40 seconds) done. [ 492.550510] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 492.550636] Suspending console(s) [ 492.631929] sd 2:0:1:0: [sda] Synchronizing SCSI cache [ 492.632156] sd 2:0:1:0: [sda] Stopping disk [ 493.601818] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 493.618497] [fglrx] firegl_gps_setpowerdown . [ 493.648899] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 493.649095] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 493.669886] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 493.670069] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 493.689811] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 493.689861] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 493.689908] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 493.689956] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 493.710010] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 493.909790] ACPI: Preparing to enter system sleep state S3 [ 494.009904] Disabling non-boot CPUs ... [ 494.009932] CPU0 attaching NULL sched-domain. [ 494.009936] CPU1 attaching NULL sched-domain. [ 494.137112] CPU 1 is now offline [ 494.137116] SMP alternatives: switching to UP code [ 494.159668] CPU0 attaching NULL sched-domain. [ 494.159668] CPU1 is down [ 494.159668] Extended CMOS year: 2000 [ 494.159668] Intel machine check architecture supported. [ 494.159668] Intel machine check reporting enabled on CPU#0. [ 494.159668] Back to C! [ 494.159668] Extended CMOS year: 2000 [ 494.159668] Enabling non-boot CPUs ... [ 494.159668] CPU0 attaching NULL sched-domain. [ 494.159668] SMP alternatives: switching to SMP code [ 494.169668] Booting processor 1/1 ip 6000 [ 494.175322] Initializing CPU#1 [ 494.315082] Calibrating delay using timer specific routine.. 4322.58 BogoMIPS (lpj=21612936) [ 494.315082] CPU: L1 I cache: 32K, L1 D cache: 32K [ 494.315082] CPU: L2 cache: 4096K [ 494.315082] CPU: Physical Processor ID: 0 [ 494.315082] CPU: Processor Core ID: 1 [ 494.315082] Intel machine check architecture supported. [ 494.315082] Intel machine check reporting enabled on CPU#1. [ 494.325708] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 494.325749] CPU0 attaching sched-domain: [ 494.325751] domain 0: span 0-1 [ 494.325753] groups: 0 1 [ 494.325757] CPU1 attaching sched-domain: [ 494.325759] domain 0: span 0-1 [ 494.325760] groups: 1 0 [ 494.315082] CPU1 is up [ 494.473253] Switched to high resolution mode on CPU 1 [ 495.109895] __ratelimit: 24 messages suppressed [ 495.109899] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 20003030) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040) [ 495.144098] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007) [ 495.144098] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 495.144098] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b) [ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000) [ 495.144098] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002) [ 495.155992] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a) [ 495.156551] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004) [ 495.156560] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40) [ 495.156571] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) [ 495.156605] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 495.156617] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 495.336139] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051) [ 495.336149] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020) [ 495.336158] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 20002020) [ 495.336173] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040) [ 495.336183] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007) [ 495.336252] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 495.336262] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 495.336297] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) [ 495.336306] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010) [ 495.336314] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing f0) [ 495.336329] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040) [ 495.336339] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007) [ 495.336397] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 495.336406] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 495.336440] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801) [ 495.336449] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10) [ 495.336458] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 20001010) [ 495.336473] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040) [ 495.336483] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007) [ 495.336540] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 495.336549] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 495.336562] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 495.336573] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 495.336640] usb usb1: root hub lost power or was reset [ 495.336679] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 495.336689] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 495.336753] usb usb2: root hub lost power or was reset [ 495.336777] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 495.336788] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 495.336852] usb usb3: root hub lost power or was reset [ 495.336886] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 495.336897] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 495.336961] usb usb4: root hub lost power or was reset [ 495.355290] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 495.355303] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 495.355524] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) [ 495.355533] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00) [ 495.355542] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 28000f0) [ 495.355560] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007) [ 495.355590] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 495.355663] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b) [ 495.355696] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005) [ 495.355713] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 495.355722] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 495.375348] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b) [ 495.375382] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) [ 495.375471] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 495.375481] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 495.378879] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 495.378890] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 495.387754] [fglrx] firegl_gps_setpowerup . [ 495.393104] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b) [ 495.393120] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000) [ 495.393143] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001) [ 495.393156] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004) [ 495.393166] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40) [ 495.393178] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 40100007) [ 495.405364] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a) [ 495.405401] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004) [ 495.405411] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40) [ 495.405424] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007) [ 495.405472] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 495.405483] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 495.430947] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000) [ 495.430958] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000) [ 495.430968] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810) [ 495.430979] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016) [ 495.487042] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 495.490273] sd 2:0:1:0: [sda] Starting disk [ 495.543941] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 495.543947] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out [ 495.593807] ata1.00: configured for UDMA/66 [ 495.594734] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x6 [ 495.597912] ata1.00: XXX: REQUEST SENSE err_mask=0x0 ASC=0x29 ASCQ=0x0 [ 495.598808] ata1.00: XXX: TUR err_mask=0x1 sense_key=0x2 [ 496.145683] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 496.145690] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out [ 496.243274] ata3.01: configured for UDMA/100 [ 496.264014] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 496.264014] sd 2:0:1:0: [sda] Write Protect is off [ 496.264014] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 496.264014] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 497.183977] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 497.354409] appletouch: Geyser mode initialized. [ 497.491873] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 497.710597] applesmc: device has already been initialized (0xe0, 0x00). [ 497.909789] usb 4-1: reset full speed USB device using uhci_hcd and address 4 [ 498.122210] Restarting tasks ... done. [ 516.000954] end_request: I/O error, dev sr0, sector 2157768 [ 516.000971] Buffer I/O error on device sr0, logical block 269721 [ 516.004962] Buffer I/O error on device sr0, logical block 269753 [ 516.004971] Buffer I/O error on device sr0, logical block 269754 [ 516.004979] Buffer I/O error on device sr0, logical block 269755 [ 516.004986] Buffer I/O error on device sr0, logical block 269756 [ 516.004994] Buffer I/O error on device sr0, logical block 269757 [ 516.005001] Buffer I/O error on device sr0, logical block 269758 [ 516.005008] Buffer I/O error on device sr0, logical block 269759 [ 516.005016] Buffer I/O error on device sr0, logical block 269760 [ 516.005024] Buffer I/O error on device sr0, logical block 269761 [ 521.154739] __ratelimit: 20690 messages suppressed [ 521.154751] Buffer I/O error on device sr0, logical block 280084 [ 526.169264] __ratelimit: 22104 messages suppressed [ 526.169264] Buffer I/O error on device sr0, logical block 291137 [ 531.280360] __ratelimit: 21634 messages suppressed [ 531.280360] Buffer I/O error on device sr0, logical block 301954 [ 536.437779] __ratelimit: 20655 messages suppressed [ 536.437792] Buffer I/O error on device sr0, logical block 312282