From: "Justin Mattock" <justinmattock@gmail.com>
To: "Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: [ 0.618502] WARNING: at drivers/misc/kgdbts.c:302 check_and_rewind_pc+0x9a/0xb4()
Date: Wed, 3 Sep 2008 11:11:13 -0700 [thread overview]
Message-ID: <dd18b0c30809031111v3669fe38q1333975cacde8054@mail.gmail.com> (raw)
I've a macbook and a dell inspiron,(don't see any serial plugins);
but wanted to see if there is any way to use this debugger i.g.
usb, or anything, if not oh well.
when configuring kgdb I just said "y" to all of the options.
When booting, using kgdboc=off (not sure if this is correct or not);
lets me boot into the system, or else freeze.
under dmesg I see this:
[ 0.618288] ------------[ cut here ]------------
[ 0.618502] WARNING: at drivers/misc/kgdbts.c:302
check_and_rewind_pc+0x9a/0xb4()
[ 0.618845] Modules linked in:
[ 0.619000] Pid: 1, comm: swapper Not tainted 2.6.27-rc5-00006-gbef69ea #15
[ 0.619321] [<c0123dd6>] warn_on_slowpath+0x41/0x65
[ 0.619568] [<c0124313>] ? release_console_sem+0x185/0x18d
[ 0.619849] [<c0111f94>] ? kgdb_correct_hw_break+0x13/0xc7
[ 0.622511] [<c03a091b>] ? notifier_call_chain+0x2b/0x4a
[ 0.622511] [<c03a094b>] ? __atomic_notifier_call_chain+0x11/0x13
[ 0.622511] [<c028bd4e>] ? kgdbts_break_test+0x0/0x1e
[ 0.622511] [<c01247b5>] ? printk+0x15/0x17
[ 0.622511] [<c028bd4e>] ? kgdbts_break_test+0x0/0x1e
[ 0.622511] [<c028c882>] check_and_rewind_pc+0x9a/0xb4
[ 0.622511] [<c0150b89>] ? kgdb_breakpoint+0x13/0x24
[ 0.622511] [<c028bd4e>] ? kgdbts_break_test+0x0/0x1e
[ 0.622511] [<c028ba32>] validate_simple_test+0x22/0x69
[ 0.622511] [<c028c0f0>] run_simple_test+0x1a1/0x20e
[ 0.622511] [<c028bacd>] kgdbts_put_char+0x14/0x16
[ 0.622511] [<c01509f2>] put_packet+0x6b/0xbb
[ 0.622511] [<c0151dd0>] kgdb_handle_exception+0xba5/0xc6d
[ 0.622511] [<c01123ad>] kgdb_notify+0x139/0x160
[ 0.622511] [<c03a091b>] notifier_call_chain+0x2b/0x4a
[ 0.622511] [<c03a094b>] __atomic_notifier_call_chain+0x11/0x13
[ 0.622511] [<c03a0959>] atomic_notifier_call_chain+0xc/0xe
[ 0.622511] [<c01371fa>] notify_die+0x2d/0x2f
[ 0.622511] [<c039f45a>] do_int3+0x29/0x67
[ 0.622511] [<c039ee4b>] int3+0x27/0x2c
[ 0.622511] [<c0150b89>] ? kgdb_breakpoint+0x13/0x24
[ 0.622511] [<c028c4d4>] configure_kgdbts+0x1ba/0x404
[ 0.622511] [<c0524413>] init_kgdbts+0x13/0x15
[ 0.622511] [<c0101125>] _stext+0x3d/0x129
[ 0.622511] [<c0524400>] ? init_kgdbts+0x0/0x15
[ 0.622511] [<c0153da6>] ? register_irq_proc+0x9c/0xb5
[ 0.622511] [<c0153de7>] ? init_irq_proc+0x28/0x33
[ 0.622511] [<c050a512>] kernel_init+0xf9/0x147
[ 0.622511] [<c050a419>] ? kernel_init+0x0/0x147
[ 0.622511] [<c0103cbf>] kernel_thread_helper+0x7/0x10
[ 0.622511] =======================
[ 0.622511] ---[ end trace 1534190084874a32 ]---
[ 0.622511] kgdbts: ERROR PUT: end of test buffer on
'singlestep_breakpoint_test' line 3 expected kgdbts_break_test got
$000000000000000046000000ab00000064ff84f740ff84f7e803000000000000
[ 0.622511] ------------[ cut here ]------------
[ 0.622511] WARNING: at drivers/misc/kgdbts.c:721
run_simple_test+0x1de/0x20e()
[ 0.622511] Modules linked in:
[ 0.622511] Pid: 1, comm: swapper Tainted: G W
2.6.27-rc5-00006-gbef69ea #15
[ 0.622511] [<c0123dd6>] warn_on_slowpath+0x41/0x65
[ 0.622511] [<c0124313>] ? release_console_sem+0x185/0x18d
[ 0.622511] [<c03a094b>] ? __atomic_notifier_call_chain+0x11/0x13
[ 0.622511] [<c028bd4e>] ? kgdbts_break_test+0x0/0x1e
[ 0.622511] [<c01247b5>] ? printk+0x15/0x17
[ 0.622511] [<c01247b5>] ? printk+0x15/0x17
[ 0.622511] [<c028c12d>] run_simple_test+0x1de/0x20e
[ 0.622511] [<c028bacd>] kgdbts_put_char+0x14/0x16
[ 0.622511] [<c01509f2>] put_packet+0x6b/0xbb
[ 0.622511] [<c0151dd0>] kgdb_handle_exception+0xba5/0xc6d
[ 0.622511] [<c01123ad>] kgdb_notify+0x139/0x160
[ 0.622511] [<c03a091b>] notifier_call_chain+0x2b/0x4a
[ 0.622511] [<c03a094b>] __atomic_notifier_call_chain+0x11/0x13
[ 0.622511] [<c03a0959>] atomic_notifier_call_chain+0xc/0xe
[ 0.622511] [<c01371fa>] notify_die+0x2d/0x2f
[ 0.622511] [<c039f45a>] do_int3+0x29/0x67
[ 0.622511] [<c039ee4b>] int3+0x27/0x2c
[ 0.622511] [<c0150b89>] ? kgdb_breakpoint+0x13/0x24
[ 0.622511] [<c028c4d4>] configure_kgdbts+0x1ba/0x404
[ 0.622511] [<c0524413>] init_kgdbts+0x13/0x15
[ 0.622511] [<c0101125>] _stext+0x3d/0x129
[ 0.622511] [<c0524400>] ? init_kgdbts+0x0/0x15
[ 0.622511] [<c0153da6>] ? register_irq_proc+0x9c/0xb5
[ 0.622511] [<c0153de7>] ? init_irq_proc+0x28/0x33
[ 0.622511] [<c050a512>] kernel_init+0xf9/0x147
[ 0.622511] [<c050a419>] ? kernel_init+0x0/0x147
[ 0.622511] [<c0103cbf>] kernel_thread_helper+0x7/0x10
[ 0.622511] =======================
[ 0.622511] ---[ end trace 1534190084874a32 ]---
If anybody has any ideas on how
I can use this debugger it would be appreciated.
regards;
--
Justin P. Mattock
reply other threads:[~2008-09-03 18:11 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd18b0c30809031111v3669fe38q1333975cacde8054@mail.gmail.com \
--to=justinmattock@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®