Re: [ath9k-devel] ath9k: massive unexplained latency in 2.6.27 (rc5, rc6, probably others)

["Justin Mattock" <justinmattock@gmail.com>]

On Thu, Sep 18, 2008 at 1:44 PM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> On Thu, Sep 18, 2008 at 12:00 PM, Steven Noonan <steven@uplinklabs.net> wrote:
>> On Thu, Sep 18, 2008 at 11:42 AM, Luis R. Rodriguez
>> <lrodriguez@atheros.com> wrote:
>>> On Thu, Sep 18, 2008 at 11:34 AM, Luis R. Rodriguez
>>>> irqpoll is a monster of evil and that should make your system crawl to
>>>> its knees. I would advise instead we work with you fixing the the
>>>> missed interrupts issue upon rmmod.
>>>
>>> Also, please provide the output of
>>>
>>> cat /proc/interrupts
>>
>> Note that the problem necessitating use of irqpoll in the first place
>> seems to only happen under certain conditions. I am unsure what these
>> conditions are. Before 'ath9k: connectivity is lost after Group
>> rekeying is done',
>
> You mean this patch:
>
> [PATCH] ath9k: connectivity is lost after Group rekeying is done
> http://marc.info/?l=linux-wireless&m=122163541519736&w=2
>
> So let me get this straight -- you applied this new patch, and haven't
> tried disabling irqpoll now?
>
>> I had used rmmod/modprobe as my solution to the
>> issue, which triggered the IRQ issue.
>
> Understood, but I also have used this before with ath9k and I got
> exactly the same results you did -- I just refused to use it again and
> just try to fix the issues present.
>
> ath9k issues tons of interrupts, not sure why irqpoll option would
> cause latency so bad as the interrupts *are* handled. Not sure
> *exactly* how irqpoll works but its description mentions using it
> forces each interrupt handler on the IRQ line to check the interrupt
> is for it. You have to keep in mind that not only are ath9k interrupts
> then being sent to the devices on its line but it would seem that all
> other devices on each line would suffer from the interrupts of the
> other guys. Why ath9k would be the *only* culprit of causing latency
> when using irqpoll if the irq line it son is clean? Beats me.
>
>> alcarin steven # cat /proc/interrupts
>>           CPU0       CPU1
>> 0x0:      63227          0   IO-APIC-edge      hpet
>> 0x8:          1          0   IO-APIC-edge      rtc0
>> 0x9:      13080          0   IO-APIC-fasteoi   acpi
>> 0xe:       8195          0   IO-APIC-edge      ide0
>> 0xf:          0          0   IO-APIC-edge      ide1
>> 0x10:         36          0   IO-APIC-fasteoi   uhci_hcd:usb5
>> 0x11:      10645          0   IO-APIC-fasteoi   ath
>
> In this case your 11n Atheros device is on a clean line.
>
>> 0x12:         42          0   IO-APIC-fasteoi   uhci_hcd:usb4
>> 0x17:        919          0   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
>
> But it was this interrupt line which had an interrupt not handled.
>
> I'm not sure why this would happen. Can't we rule out ath9k then since
> its on a different interrupt line?
>
>> 0x13:      32885          0   IO-APIC-fasteoi   uhci_hcd:usb3,
>> ata_piix, ohci1394
>> 0x200100:          1          0   PCI-MSI-edge      eth0
>> 0x16:        223          0   IO-APIC-fasteoi   HDA Intel
>> NMI:          0          0   Non-maskable interrupts
>> LOC:      78087      95718   Local timer interrupts
>> RES:      11576      16384   Rescheduling interrupts
>> CAL:       6862       8889   Function call interrupts
>> TLB:         54         41   TLB shootdowns
>> TRM:          0          0   Thermal event interrupts
>> THR:          0          0   Threshold APIC interrupts
>> SPU:          0          0   Spurious interrupts
>> ERR:          0
>
> Can you try to reproduce the irq not handled again?
>
>>>
>>> and also please do not cross post to all these lists, just use
>>> linux-wireless or ath9k.
>>>
>>
>> Sorry, but in the past I've posted to linux-wireless, ath9k-devel, and
>> all the maintainers of ath9k and didn't get a single response (except
>> a 'me too' from a fellow ath9k user). I didn't just want to hear
>> crickets this time.
>
> Patches speak more than words, but yeah sorry, we should have
> addressed this there. I've personally have just been busy with
> tackling aggregation.
>
>  Luis
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>

Appologize about that, I'm wondering
what is or was the main commit that might be causing
all of these disable irq #'s in usb, wireless, etc..
just doing a quick search one cant help but to think
maybe this is something with tick.(but could be wrong);

-- 
Justin P. Mattock