From: Justin Mattock <justinmattock@gmail.com>
To: Clemens Ladisch <clemens@ladisch.de>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, Takashi Iwai <tiwai@suse.de>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
alsa-devel@alsa-project.org
Subject: Re: no sound with the new imac
Date: Wed, 8 Apr 2009 08:58:34 -0700 [thread overview]
Message-ID: <dd18b0c30904080858s1e41d5ebjda2d59ad74b6543e@mail.gmail.com> (raw)
In-Reply-To: <49DCB75A.1010005@ladisch.de>
[-- Attachment #1: Type: text/plain, Size: 1138 bytes --]
On Wed, Apr 8, 2009 at 7:40 AM, Clemens Ladisch <clemens@ladisch.de> wrote:
> Rafael J. Wysocki wrote:
>> Takashi, what's the appropriate list for ALSA-related things?
>
> alsa-devel (Takashi is on vacation until after the Easter weekend).
>
>> On Wednesday 08 April 2009, Justin Mattock wrote:
>> > Can somebody point me in the right direction
>> > to creating the correct pin numbers etc...
>> > for the new imac so I can have sound.
>
> What kernel version are you using? Are there any messages in the
> system log when you load the snd-hda-intel driver? What model do you
> mean with "the new imac"? What are the contents of
> /proc/asound/card0/codec#0?
>
>
> Best regards,
> Clemens
>
sh^t
forgot about easter.
anyways(just another day to me)
As for when I mean new imac, I mean
the new update that took place a few weeks ago.
here is cat /proc/asound/*
dmesg,lspci is in the file imacinfo.
attached.
didn't mean to be impatient,
the feeling of being helpless, and
unable to create code is a horrible feeling.
(and also not able to listen to tunes)
regards,
--
Justin P. Mattock
[-- Attachment #2: imacinfo --]
[-- Type: application/octet-stream, Size: 65435 bytes --]
cat /proc/asound/*
cat: asound/NVidia: Is a directory
cat: asound/card0: Is a directory
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xd3480000 irq 17
0: [ 0] : control
4: [ 0- 0]: hardware dependent
16: [ 0- 0]: digital audio playback
17: [ 0- 1]: digital audio playback
24: [ 0- 0]: digital audio capture
25: [ 0- 1]: digital audio capture
26: [ 0- 2]: digital audio capture
33: : timer
00-00: HDA Codec 0
00-00: ALC885 Analog : ALC885 Analog : playback 1 : capture 1
00-01: ALC885 Digital : ALC885 Digital : playback 1 : capture 1
00-02: ALC885 Analog : ALC885 Analog : capture 2
cat: asound/seq: Is a directory
G0: system timer : 10000.000us (10000000 ticks)
P0-0-0: PCM playback 0-0-0 : SLAVE
P0-0-1: PCM capture 0-0-1 : SLAVE
P0-1-0: PCM playback 0-1-0 : SLAVE
P0-1-1: PCM capture 0-1-1 : SLAVE
P0-2-1: PCM capture 0-2-1 : SLAVE
P0-2-3: PCM capture 0-2-3 : SLAVE
Advanced Linux Sound Architecture Driver Version 1.0.18a.
cat card0/*
Codec: Realtek ALC889A
Address: 0
Vendor Id: 0x10ec0885
Subsystem Id: 0x106b4900
Revision Id: 0x100103
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=2, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x05 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In
Amp-In caps: ofs=0x10, nsteps=0x2e, stepsize=0x03, mute=1
Amp-In vals: [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Connection: 1
0x22
Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Unsolicited: tag=00, enabled=0
Connection: 1
0x1f
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97] [0x97 0x97]
Connection: 10
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17
Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x04 0x0b
Node 0x0f [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x05 0x0b
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x012b4050: [Jack] HP Out at Ext Rear
Conn = Comb, Color = Green
DefAssociation = 0x5, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x018b3020: [Jack] Line In at Ext Rear
Conn = Comb, Color = Blue
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x16 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e* 0x0f 0x26
Node 0x17 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000003c: IN OUT HP Detect
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d 0x0e 0x0f* 0x26
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90100141: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90a00110: [Fixed] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x90100140: [Fixed] Speaker at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x4, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c 0x0d* 0x0e 0x0f 0x26
Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000373c: IN OUT HP Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 5
0x0c* 0x0d 0x0e 0x0f 0x26
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x400000f0: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400300: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x014be060: [Jack] SPDIF Out at Ext Rear
Conn = Comb, Color = White
DefAssociation = 0x6, Sequence = 0x0
Pin-ctls: 0x40: OUT
Connection: 1
0x06
Node 0x1f [Pin Complex] wcaps 0x400200: Mono Digital
Pincap 0x00000020: IN
Pin Default 0x01cbe030: [Jack] SPDIF In at Ext Rear
Conn = Comb, Color = White
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x20: IN
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=17
Processing Coefficient: 0x12
Coefficient Index: 0x01
Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono
Volume-Knob: delta=0, steps=32, direct=0, val=63
Unsolicited: tag=00, enabled=0
Connection: 0
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 11
0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x16 0x17 0x0b
Node 0x25 [Audio Output] wcaps 0x11: Stereo
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x26 [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x80 0x80]
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Connection: 2
0x25 0x0b
NVidia
cat seq/*
results in nothing.
lspci -vvv
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b2)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 2000 [size=256]
00:03.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus: nVidia Corporation MCP79 SMBus (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Region 0: I/O ports at 2180 [size=64]
Region 4: I/O ports at 2140 [size=64]
Region 5: I/O ports at 2100 [size=64]
Capabilities: <access denied>
00:03.3 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.5 Co-processor: nVidia Corporation MCP79 Co-processor (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 14
Region 0: Memory at d3400000 (32-bit, non-prefetchable) [size=512K]
00:04.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d3488000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:04.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 19
Region 0: Memory at d3489200 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:06.0 USB Controller: nVidia Corporation MCP79 OHCI USB 1.1 Controller (rev b1) (prog-if 10 [OHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at d3487000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:06.1 USB Controller: nVidia Corporation MCP79 EHCI USB 2.0 Controller (rev b1) (prog-if 20 [EHCI])
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 18
Region 0: Memory at d3489100 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d3480000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:09.0 PCI bridge: nVidia Corporation MCP79 PCI Bridge (rev b1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3300000-d33fffff
Prefetchable memory behind bridge: fff00000-000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 14
Region 0: Memory at d3486000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 21e0 [size=8]
Region 2: Memory at d3489000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at d3489300 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:0b.0 IDE interface: nVidia Corporation MCP79 SATA Controller (rev b1) (prog-if 85 [Master SecO PriO])
Subsystem: nVidia Corporation Device cb79
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at 21d8 [size=8]
Region 1: I/O ports at 21ec [size=4]
Region 2: I/O ports at 21d0 [size=8]
Region 3: I/O ports at 21e8 [size=4]
Region 4: I/O ports at 21c0 [size=16]
Region 5: Memory at d3484000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:0c.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0000000-d30fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:15.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3200000-d32fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:16.0 PCI bridge: nVidia Corporation MCP79 PCI Express Bridge (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d3100000-d31fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.0 VGA compatible controller: nVidia Corporation Device 062e (rev a1) (prog-if 00 [VGA controller])
Subsystem: Apple Computer Inc. Device 0605
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 1000 [size=128]
[virtual] Expansion ROM at d3000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN Controller (rev 01)
Subsystem: Apple Computer Inc. Device 008e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at d3200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: wl
Kernel modules: wl
04:00.0 FireWire (IEEE 1394): Agere Systems FW643 PCI Express1394b Controller (PHY/Link) (rev 07) (prog-if 10 [OHCI])
Subsystem: Agere Systems Device 5900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 256 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at d3100000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
dmesg:
[ 0.000000] Linux version 2.6.29 (name@name) (gcc version 4.5.0 20090327 (experimental) (GCC) ) #6 SMP Tue Apr 7 05:22:53 PDT 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000be830000 (usable)
[ 0.000000] BIOS-e820: 00000000be830000 - 00000000be834000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be834000 - 00000000be84f000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000be84f000 - 00000000bea50000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bea50000 - 00000000bfec5000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec5000 - 00000000bfec7000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfec7000 - 00000000bfec8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbe830 max_arch_pfn = 0x100000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
[ 0.000000] ACPI: XSDT BFEEE1C0, 0074 (r1 APPLE Apple00 8D 1000013)
[ 0.000000] ACPI: FACP BFEEC000, 00F4 (r3 APPLE Apple00 8D Loki 5F)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT BFEE0000, 5566 (r1 APPLE iMac 90001 INTL 20061109)
[ 0.000000] ACPI: FACS BFECD000, 0040
[ 0.000000] ACPI: HPET BFEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: APIC BFEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: MCFG BFEE9000, 003C (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ASF! BFEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SBST BFEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: ECDT BFEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
[ 0.000000] ACPI: SSDT BFEC7000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
[ 0.000000] ACPI: SSDT BFEDF000, 00A5 (r1 SataRe SataPri 1000 INTL 20061109)
[ 0.000000] ACPI: SSDT BFECC000, 009F (r1 SataRe SataSec 1000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2160MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00008000 - 0000ef00
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00006744d0] TEXT DATA BSS ==> [0000100000 - 00006744d0]
[ 0.000000] #4 [0000675000 - 0000678000] INIT_PG_TABLE ==> [0000675000 - 0000678000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000be830
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000be830
[ 0.000000] On node 0 totalpages: 780239
[ 0.000000] free_area_init_node: node 0, pgdat c0548480, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4321 pages used for memmap
[ 0.000000] HighMem zone: 548689 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 774142
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.29 root=/dev/sda3 debug vga=893
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3051.309 MHz processor.
[ 0.010000] spurious 8259A interrupt: IRQ7.
[ 0.010000] Console: colour dummy device 80x25
[ 0.010000] console [tty0] enabled
[ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.010000] Memory: 3089104k/3121344k available (2880k kernel code, 31044k reserved, 1593k data, 408k init, 2212040k highmem)
[ 0.010000] virtual kernel memory layout:
[ 0.010000] fixmap : 0xfff9e000 - 0xfffff000 ( 388 kB)
[ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.010000] .init : 0xc0566000 - 0xc05cc000 ( 408 kB)
[ 0.010000] .data : 0xc03d01b9 - 0xc055e744 (1593 kB)
[ 0.010000] .text : 0xc0100000 - 0xc03d01b9 (2880 kB)
[ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.010000] hpet clockevent registered
[ 0.010000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6102.61 BogoMIPS (lpj=30513090)
[ 0.010000] Security Framework initialized
[ 0.010000] SELinux: Initializing.
[ 0.010000] SELinux: Starting in permissive mode
[ 0.010000] Mount-cache hash table entries: 512
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 0
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#0.
[ 0.010000] using mwait in idle threads.
[ 0.010000] Checking 'hlt' instruction... OK.
[ 0.041384] ACPI: Core revision 20081204
[ 0.074614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.174636] CPU0: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz stepping 0a
[ 0.180000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.010000] Initializing CPU#1
[ 0.010000] Calibrating delay using timer specific routine.. 6102.75 BogoMIPS (lpj=30513780)
[ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.010000] CPU: L2 cache: 6144K
[ 0.010000] [ds] using Core 2/Atom configuration
[ 0.010000] CPU: Physical Processor ID: 0
[ 0.010000] CPU: Processor Core ID: 1
[ 0.010000] Intel machine check architecture supported.
[ 0.010000] Intel machine check reporting enabled on CPU#1.
[ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.332453] CPU1: Intel(R) Core(TM)2 Duo CPU E8435 @ 3.06GHz stepping 0a
[ 0.332501] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.340030] Brought up 2 CPUs
[ 0.340035] Total of 2 processors activated (12205.37 BogoMIPS).
[ 0.340118] CPU0 attaching sched-domain:
[ 0.340124] domain 0: span 0-1 level MC
[ 0.340129] groups: 0 1
[ 0.340136] CPU1 attaching sched-domain:
[ 0.340141] domain 0: span 0-1 level MC
[ 0.340145] groups: 1 0
[ 0.340250] net_namespace: 800 bytes
[ 0.340567] Booting paravirtualized kernel on bare hardware
[ 0.340786] NET: Registered protocol family 16
[ 0.340786] EISA bus registered
[ 0.340786] ACPI: bus type pci registered
[ 0.340786] PCI: Using configuration type 1 for base access
[ 0.350087] bio: create slab <bio-0> at 0
[ 0.361821] ACPI: EC: EC description table is found, configuring boot EC
[ 0.362257] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.371918] ACPI: BIOS _OSI(Linux) query ignored
[ 0.374292] ACPI: Interpreter enabled
[ 0.374301] ACPI: (supports S0 S3 S4 S5)
[ 0.374399] ACPI: Using IOAPIC for interrupt routing
[ 0.416780] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.416780] ACPI: EC: driver started in interrupt mode
[ 0.416780] ACPI: No dock devices found.
[ 0.416780] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.416780] pci 0000:00:03.0: reg 10 io port: [0x2000-0x20ff]
[ 0.416780] pci 0000:00:03.2: reg 10 io port: [0x2180-0x21bf]
[ 0.416780] pci 0000:00:03.2: reg 20 io port: [0x2140-0x217f]
[ 0.416780] pci 0000:00:03.2: reg 24 io port: [0x2100-0x213f]
[ 0.416780] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.416780] pci 0000:00:03.2: PME# disabled
[ 0.416780] pci 0000:00:03.5: reg 10 32bit mmio: [0xd3400000-0xd347ffff]
[ 0.416780] pci 0000:00:04.0: reg 10 32bit mmio: [0xd3488000-0xd3488fff]
[ 0.416780] pci 0000:00:04.0: supports D1 D2
[ 0.416780] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416780] pci 0000:00:04.0: PME# disabled
[ 0.416780] pci 0000:00:04.1: reg 10 32bit mmio: [0xd3489200-0xd34892ff]
[ 0.416780] pci 0000:00:04.1: supports D1 D2
[ 0.416780] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.416780] pci 0000:00:04.1: PME# disabled
[ 0.416780] pci 0000:00:06.0: reg 10 32bit mmio: [0xd3487000-0xd3487fff]
[ 0.416780] pci 0000:00:06.0: supports D1 D2
[ 0.416780] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420004] pci 0000:00:06.0: PME# disabled
[ 0.420041] pci 0000:00:06.1: reg 10 32bit mmio: [0xd3489100-0xd34891ff]
[ 0.420086] pci 0000:00:06.1: supports D1 D2
[ 0.420091] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420098] pci 0000:00:06.1: PME# disabled
[ 0.420139] pci 0000:00:08.0: reg 10 32bit mmio: [0xd3480000-0xd3483fff]
[ 0.420178] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.420185] pci 0000:00:08.0: PME# disabled
[ 0.420267] pci 0000:00:0a.0: reg 10 32bit mmio: [0xd3486000-0xd3486fff]
[ 0.420276] pci 0000:00:0a.0: reg 14 io port: [0x21e0-0x21e7]
[ 0.420284] pci 0000:00:0a.0: reg 18 32bit mmio: [0xd3489000-0xd34890ff]
[ 0.420293] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xd3489300-0xd348930f]
[ 0.420325] pci 0000:00:0a.0: supports D1 D2
[ 0.420329] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420338] pci 0000:00:0a.0: PME# disabled
[ 0.420375] pci 0000:00:0b.0: reg 10 io port: [0x21d8-0x21df]
[ 0.420383] pci 0000:00:0b.0: reg 14 io port: [0x21ec-0x21ef]
[ 0.420391] pci 0000:00:0b.0: reg 18 io port: [0x21d0-0x21d7]
[ 0.420399] pci 0000:00:0b.0: reg 1c io port: [0x21e8-0x21eb]
[ 0.420407] pci 0000:00:0b.0: reg 20 io port: [0x21c0-0x21cf]
[ 0.420416] pci 0000:00:0b.0: reg 24 32bit mmio: [0xd3484000-0xd3485fff]
[ 0.420642] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420653] pci 0000:00:0c.0: PME# disabled
[ 0.420893] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.420904] pci 0000:00:15.0: PME# disabled
[ 0.421134] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.421145] pci 0000:00:16.0: PME# disabled
[ 0.421237] pci 0000:00:09.0: transparent bridge
[ 0.421245] pci 0000:00:09.0: bridge 32bit mmio: [0xd3300000-0xd33fffff]
[ 0.421301] pci 0000:02:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff]
[ 0.421316] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.421331] pci 0000:02:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff]
[ 0.421341] pci 0000:02:00.0: reg 24 io port: [0x1000-0x107f]
[ 0.421350] pci 0000:02:00.0: reg 30 32bit mmio: [0xd3000000-0xd307ffff]
[ 0.421445] pci 0000:00:0c.0: bridge io port: [0x1000-0x1fff]
[ 0.421456] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0000000-0xd30fffff]
[ 0.421474] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.421697] pci 0000:03:00.0: reg 10 64bit mmio: [0xd3200000-0xd3203fff]
[ 0.421767] pci 0000:03:00.0: supports D1 D2
[ 0.421771] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.421779] pci 0000:03:00.0: PME# disabled
[ 0.421855] pci 0000:00:15.0: bridge 32bit mmio: [0xd3200000-0xd32fffff]
[ 0.421950] pci 0000:04:00.0: reg 10 64bit mmio: [0xd3100000-0xd3100fff]
[ 0.422017] pci 0000:04:00.0: supports D1 D2
[ 0.422021] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.422029] pci 0000:04:00.0: PME# disabled
[ 0.422103] pci 0000:00:16.0: bridge 32bit mmio: [0xd3100000-0xd31fffff]
[ 0.422164] pci_bus 0000:00: on NUMA node 0
[ 0.422182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.633576] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.633576] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.633576] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.633711] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.634666] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.640584] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.641537] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.642499] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.643450] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.644399] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.645348] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.646300] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.647248] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.648201] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.649172] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.650169] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.651143] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.652116] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.653086] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.654056] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.655025] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.655992] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.656959] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.657926] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.658892] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.659856] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.660839] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.661801] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.662771] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.663733] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.664698] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.665655] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.666609] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.667563] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.668514] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.669466] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.670442] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.671399] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.672352] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.673303] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.674281] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.675247] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.676212] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.677176] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.677380] SCSI subsystem initialized
[ 0.677380] libata version 3.00 loaded.
[ 0.677380] usbcore: registered new interface driver usbfs
[ 0.677380] usbcore: registered new interface driver hub
[ 0.677380] usbcore: registered new device driver usb
[ 0.680099] PCI: Using ACPI for IRQ routing
[ 0.770124] cfg80211: Using static regulatory domain info
[ 0.770124] cfg80211: Regulatory domain: US
[ 0.770124] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.770124] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.770124] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.770124] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.770124] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.770124] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.770124] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.770124] cfg80211: Calling CRDA for country: US
[ 0.770146] NetLabel: Initializing
[ 0.770146] NetLabel: domain hash size = 128
[ 0.770146] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.770173] NetLabel: unlabeled traffic allowed by default
[ 0.770189] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.770199] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.790006] Switched to high resolution mode on CPU 0
[ 0.792534] Switched to high resolution mode on CPU 1
[ 0.830039] pnp: PnP ACPI init
[ 0.830067] ACPI: bus type pnp registered
[ 0.841456] pnp: PnP ACPI: found 8 devices
[ 0.841462] ACPI: ACPI bus type pnp unregistered
[ 0.841481] system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.841497] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.841511] system 00:06: ioport range 0x400-0x47f has been reserved
[ 0.841518] system 00:06: ioport range 0x480-0x4ff has been reserved
[ 0.841524] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.841531] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.841538] system 00:06: ioport range 0x800-0x87f has been reserved
[ 0.841545] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.841552] system 00:06: ioport range 0x2140-0x217f has been reserved
[ 0.841558] system 00:06: ioport range 0x2100-0x213f has been reserved
[ 0.841566] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.841573] system 00:06: ioport range 0x295-0x296 has been reserved
[ 0.877794] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.877800] pci 0000:00:09.0: IO window: disabled
[ 0.877808] pci 0000:00:09.0: MEM window: 0xd3300000-0xd33fffff
[ 0.877814] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.877823] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:02
[ 0.877831] pci 0000:00:0c.0: IO window: 0x1000-0x1fff
[ 0.877845] pci 0000:00:0c.0: MEM window: 0xd0000000-0xd30fffff
[ 0.877857] pci 0000:00:0c.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.877875] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.877880] pci 0000:00:15.0: IO window: disabled
[ 0.877893] pci 0000:00:15.0: MEM window: 0xd3200000-0xd32fffff
[ 0.877904] pci 0000:00:15.0: PREFETCH window: disabled
[ 0.877920] pci 0000:00:16.0: PCI bridge, secondary bus 0000:04
[ 0.877925] pci 0000:00:16.0: IO window: disabled
[ 0.877939] pci 0000:00:16.0: MEM window: 0xd3100000-0xd31fffff
[ 0.877950] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.877968] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.877977] pci 0000:00:09.0: setting latency timer to 64
[ 0.879484] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 23
[ 0.879494] pci 0000:00:0c.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 0.879508] pci 0000:00:0c.0: setting latency timer to 64
[ 0.881029] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 22
[ 0.881038] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 0.881052] pci 0000:00:15.0: setting latency timer to 64
[ 0.882543] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 21
[ 0.882552] pci 0000:00:16.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 0.882566] pci 0000:00:16.0: setting latency timer to 64
[ 0.882575] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.882580] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.882586] pci_bus 0000:01: resource 0 mem: [0x0-0x0]
[ 0.882591] pci_bus 0000:01: resource 1 mem: [0xd3300000-0xd33fffff]
[ 0.882596] pci_bus 0000:01: resource 2 mem: [0x0-0x0]
[ 0.882601] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.882606] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.882612] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff]
[ 0.882617] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd30fffff]
[ 0.882622] pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
[ 0.882628] pci_bus 0000:02: resource 3 mem: [0x0-0x0]
[ 0.882633] pci_bus 0000:03: resource 0 mem: [0x0-0x0]
[ 0.882637] pci_bus 0000:03: resource 1 mem: [0xd3200000-0xd32fffff]
[ 0.882643] pci_bus 0000:03: resource 2 mem: [0x0-0x0]
[ 0.882648] pci_bus 0000:03: resource 3 mem: [0x0-0x0]
[ 0.882652] pci_bus 0000:04: resource 0 mem: [0x0-0x0]
[ 0.882657] pci_bus 0000:04: resource 1 mem: [0xd3100000-0xd31fffff]
[ 0.882663] pci_bus 0000:04: resource 2 mem: [0x0-0x0]
[ 0.882667] pci_bus 0000:04: resource 3 mem: [0x0-0x0]
[ 0.882709] NET: Registered protocol family 2
[ 1.000115] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.000536] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.001044] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
[ 1.001662] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.001668] TCP reno registered
[ 1.030162] NET: Registered protocol family 1
[ 1.033910] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.035712] Initializing RT-Tester: OK
[ 1.035864] audit: initializing netlink socket (disabled)
[ 1.035921] type=2000 audit(1239204635.030:1): initialized
[ 1.046920] highmem bounce pool size: 64 pages
[ 1.046931] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.068135] fuse init (API version 7.11)
[ 1.068892] msgmni has been set to 1714
[ 1.069188] SELinux: Registering netfilter hooks
[ 1.070089] alg: No test for stdrng (krng)
[ 1.070114] io scheduler noop registered
[ 1.070519] io scheduler cfq registered (default)
[ 1.092731] pci 0000:02:00.0: Boot video device
[ 1.094882] vesafb: framebuffer at 0xd1000000, mapped to 0xf8080000, using 14336k, total 14336k
[ 1.094891] vesafb: mode is 1920x1200x32, linelength=7680, pages=1
[ 1.094896] vesafb: protected mode interface info at c000:bd10
[ 1.094902] vesafb: pmi: set display start = c00cbd73, set palette = c00cbdce
[ 1.094907] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 1.094933] vesafb: scrolling: redraw
[ 1.094938] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.192288] Console: switching to colour frame buffer device 240x75
[ 1.280092] fb0: VESA VGA frame buffer device
[ 1.297524] loop: module loaded
[ 1.297731] Linux video capture interface: v2.00
[ 1.298332] input: Macintosh mouse button emulation as /class/input/input0
[ 1.299157] Driver 'sd' needs updating - please use bus_type methods
[ 1.299671] Driver 'sr' needs updating - please use bus_type methods
[ 1.300358] ahci 0000:00:0b.0: version 3.0
[ 1.302174] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 20
[ 1.302549] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 20 (level, low) -> IRQ 20
[ 1.303103] ahci 0000:00:0b.0: irq 24 for MSI/MSI-X
[ 1.303474] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 1.303973] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
[ 1.304423] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.304961] scsi0 : ahci
[ 1.305766] scsi1 : ahci
[ 1.306139] scsi2 : ahci
[ 1.306508] scsi3 : ahci
[ 1.306873] scsi4 : ahci
[ 1.307236] scsi5 : ahci
[ 1.308106] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
[ 1.308616] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 24
[ 1.309124] ata3: DUMMY
[ 1.309277] ata4: DUMMY
[ 1.309429] ata5: DUMMY
[ 1.309582] ata6: DUMMY
[ 2.230013] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.231092] ata1.00: ATA-8: WDC WD1001FALS-40K1B0, 07.00K07, max UDMA/133
[ 2.231515] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.232774] ata1.00: configured for UDMA/133
[ 2.250188] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-4 07.0 PQ: 0 ANSI: 5
[ 2.251116] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 2.251636] sd 0:0:0:0: [sda] Write Protect is off
[ 2.251937] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.252309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.253016] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 2.253534] sd 0:0:0:0: [sda] Write Protect is off
[ 2.253835] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.254206] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.254772] sda: sda1 sda2 sda3 sda4
[ 2.302055] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.302639] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.230012] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.253336] ata2.00: ATAPI: OPTIARC DVD RW AD-5670S, 2AHC, max UDMA/100, ATAPI AN
[ 3.276509] ata2.00: configured for UDMA/100
[ 3.315684] scsi 1:0:0:0: CD-ROM OPTIARC DVD RW AD-5670S 2AHC PQ: 0 ANSI: 5
[ 3.355570] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 3.373483] Uniform CD-ROM driver Revision: 3.20
[ 3.391672] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.409739] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.427799] usbcore: registered new interface driver usblcd
[ 3.445558] usbcore: registered new interface driver usbled
[ 3.463553] PNP: No PS/2 controller found. Probing ports directly.
[ 3.482071] i8042.c: No controller found.
[ 3.530257] mice: PS/2 mouse device common for all mice
[ 3.549260] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.567502] EDAC MC: Ver: 2.1.0 Apr 7 2009
[ 3.586356] cpuidle: using governor ladder
[ 3.604395] cpuidle: using governor menu
[ 3.624689] usbcore: registered new interface driver hiddev
[ 3.642514] usbcore: registered new interface driver usbhid
[ 3.660031] usbhid: v2.6:USB HID core driver
[ 3.677558] Advanced Linux Sound Architecture Driver Version 1.0.18a.
[ 3.695114] ALSA device list:
[ 3.695115] No soundcards found.
[ 3.695341] oprofile: using NMI interrupt.
[ 3.695655] IPVS: Registered protocols (TCP, AH, ESP)
[ 3.695882] IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
[ 3.695915] IPVS: ipvs loaded.
[ 3.696371] Initializing XFRM netlink socket
[ 3.696384] NET: Registered protocol family 17
[ 3.696391] NET: Registered protocol family 15
[ 3.696418] lib80211: common routines for IEEE802.11 drivers
[ 3.696421] lib80211_crypt: registered algorithm 'NULL'
[ 3.696423] lib80211_crypt: registered algorithm 'WEP'
[ 3.696425] lib80211_crypt: registered algorithm 'CCMP'
[ 3.696428] lib80211_crypt: registered algorithm 'TKIP'
[ 3.696440] Using IPI No-Shortcut mode
[ 4.009497] kjournald starting. Commit interval 5 seconds
[ 4.009507] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.009547] VFS: Mounted root (ext3 filesystem) readonly on device 8:3.
[ 4.009798] Freeing unused kernel memory: 408k freed
[ 4.920345] applesmc: Apple iMac detected:
[ 4.937874] applesmc: - Model without accelerometer
[ 4.956343] applesmc: - Model without light sensors and backlight
[ 4.975044] applesmc: - Model with 9 temperature sensors
[ 4.975320] applesmc: device successfully initialized.
[ 4.976125] applesmc: 3 fans found.
[ 4.976362] applesmc: driver successfully loaded.
[ 5.085085] wl: module license '' taints kernel.
[ 5.106716] wl 0000:03:00.0: power state changed by ACPI to D0
[ 5.126893] wl 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 22 (level, low) -> IRQ 22
[ 5.147175] wl 0000:03:00.0: setting latency timer to 64
[ 5.163976] eth0 (wl): not using net_device_ops yet
[ 5.184684] eth0: Broadcom BCM432b 802.11 Wireless Controller 5.10.79.10
[ 5.213915] ACPI: SSDT BFECAA98, 02FE (r1 APPLE Cpu0Ist 3000 INTL 20061109)
[ 5.235554] ACPI: SSDT BFEC8C18, 028F (r1 APPLE Cpu0Cst 3001 INTL 20061109)
[ 5.257357] Monitor-Mwait will be used to enter C-1 state
[ 5.257366] Monitor-Mwait will be used to enter C-2 state
[ 5.257373] Monitor-Mwait will be used to enter C-3 state
[ 5.258005] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 5.278685] processor ACPI_CPU:00: registered as cooling_device0
[ 5.299127] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 5.321483] ACPI: SSDT BFEC9F18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
[ 5.343373] ACPI: SSDT BFEC8F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
[ 5.365451] Marking TSC unstable due to TSC halts in idle
[ 5.386428] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 5.406825] processor ACPI_CPU:01: registered as cooling_device1
[ 5.427105] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 5.509076] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.565627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.586911] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 5.607916] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[ 5.629025] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 5.668257] arp_tables: (C) 2002 David S. Miller
[ 5.713896] usbcore: registered new interface driver isight_firmware
[ 5.748220] usbcore: registered new interface driver uvcvideo
[ 5.770020] USB Video Class driver (v0.1.0)
[ 5.809470] ipmi message handler version 39.2
[ 5.833819] IPMI Watchdog: driver initialized
[ 5.865118] Bluetooth: Core ver 2.14
[ 5.887488] NET: Registered protocol family 31
[ 5.909598] Bluetooth: HCI device and connection manager initialized
[ 5.931734] Bluetooth: HCI socket layer initialized
[ 5.957585] Bluetooth: L2CAP ver 2.11
[ 5.979325] Bluetooth: L2CAP socket layer initialized
[ 6.009625] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.043825] Bluetooth: Generic Bluetooth USB driver ver 0.4
[ 6.066217] usbcore: registered new interface driver btusb
[ 6.103791] Bluetooth: RFCOMM socket layer initialized
[ 6.126095] Bluetooth: RFCOMM TTY layer initialized
[ 6.148424] Bluetooth: RFCOMM ver 1.10
[ 6.177873] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.200365] Bluetooth: SCO socket layer initialized
[ 6.234559] Bluetooth: HCI UART driver ver 2.2
[ 6.257122] Bluetooth: HCI H4 protocol initialized
[ 6.279614] Bluetooth: HCI BCSP protocol initialized
[ 6.500029] Clocksource tsc unstable (delta = -94993735 ns)
[ 6.731742] udev: starting version 140
[ 6.754627] udev: deprecated sysfs layout; update the kernel or disable CONFIG_SYSFS_DEPRECATED; some udev features will not work correctly
[ 7.068389] input: Power Button (FF) as /class/input/input1
[ 7.130245] ACPI: Power Button (FF) [PWRF]
[ 7.143688] input: Power Button (CM) as /class/input/input2
[ 7.219966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.234308] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 7.247743] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
[ 7.247745] ACPI: Power Button (CM) [PWRB]
[ 7.247824] input: Sleep Button (CM) as /class/input/input3
[ 7.288203] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 7.288206] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 7.301713] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 7.315255] ehci_hcd 0000:00:04.1: debug port 1
[ 7.328613] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 7.328632] ehci_hcd 0000:00:04.1: irq 19, io mem 0xd3489200
[ 7.361787] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 7.379042] usb usb1: configuration #1 chosen from 1 choice
[ 7.396334] hub 1-0:1.0: USB hub found
[ 7.413430] hub 1-0:1.0: 7 ports detected
[ 7.430885] Linux agpgart interface v0.103
[ 7.449456] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 7.466615] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18
[ 7.483227] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 7.483230] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 7.499743] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 7.516237] ehci_hcd 0000:00:06.1: debug port 1
[ 7.532500] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 7.532523] ehci_hcd 0000:00:06.1: irq 18, io mem 0xd3489100
[ 7.552616] ACPI: Sleep Button (CM) [SLPB]
[ 7.560039] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 7.560178] usb usb2: configuration #1 chosen from 1 choice
[ 7.560238] hub 2-0:1.0: USB hub found
[ 7.560248] hub 2-0:1.0: 5 ports detected
[ 7.760140] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 7.807280] ohci1394 0000:04:00.0: PCI INT A -> Link[Z00J] -> GSI 21 (level, low) -> IRQ 21
[ 7.823366] ohci1394 0000:04:00.0: setting latency timer to 64
[ 7.882268] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[d3100000-d31007ff] Max Packet=[4096] IR/IT contexts=[8/8]
[ 7.949494] usb 1-1: configuration #1 chosen from 1 choice
[ 7.972644] hub 1-1:1.0: USB hub found
[ 7.995578] hub 1-1:1.0: 3 ports detected
[ 8.172529] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 8.302737] ACPI Exception (evregion-0422): AE_ERROR, Returned by Handler for [PCI_Config] [20081204]
[ 8.324755] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.RP01.GFX0._PS0] (Node f703ecc0), AE_ERROR
[ 8.347168] ACPI: Transitioning device [GFX0] to D0
[ 8.369236] nvidia 0000:02:00.0: PCI INT A -> Link[Z003] -> GSI 23 (level, low) -> IRQ 23
[ 8.391552] nvidia 0000:02:00.0: setting latency timer to 64
[ 8.391859] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.29 Wed Feb 4 23:44:25 PST 2009
[ 8.421037] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 8.426336] usb 1-4: configuration #1 chosen from 1 choice
[ 8.427136] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8502)
[ 8.428374] input: Built-in iSight as /class/input/input4
[ 8.508091] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 8.530218] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 8.860594] usb 1-1.1: new high speed USB device using ehci_hcd and address 5
[ 8.992202] usb 1-1.1: configuration #1 chosen from 1 choice
[ 9.014785] hub 1-1.1:1.0: USB hub found
[ 9.037705] hub 1-1.1:1.0: 4 ports detected
[ 9.150594] usb 1-1.2: new low speed USB device using ehci_hcd and address 6
[ 9.250680] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0023dffffe8cd104]
[ 9.287078] usb 1-1.2: configuration #1 chosen from 1 choice
[ 9.313579] input: Apple Inc. Apple Keyboard as /class/input/input5
[ 9.410179] generic-usb 0003:05AC:021D.0001: input: USB HID v1.11 Keyboard [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input0
[ 9.436183] input: Apple Inc. Apple Keyboard as /class/input/input6
[ 9.530178] generic-usb 0003:05AC:021D.0002: input: USB HID v1.11 Device [Apple Inc. Apple Keyboard] on usb-0000:00:04.1-1.2/input1
[ 9.630599] usb 1-1.3: new low speed USB device using ehci_hcd and address 7
[ 9.766343] usb 1-1.3: configuration #1 chosen from 1 choice
[ 9.794037] input: Mitsumi Electric Apple Optical USB Mouse as /class/input/input7
[ 9.902685] apple 0003:05AC:0304.0003: input: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-0000:00:04.1-1.3/input0
[ 10.391617] Adding 300772k swap on /dev/sda4. Priority:1 extents:1 across:300772k
[ 11.522467] EXT3 FS on sda3, internal journal
[ 26.645063] IRQ 23/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
next prev parent reply other threads:[~2009-04-08 15:58 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-08 7:23 Justin Mattock
2009-04-08 8:16 ` Rafael J. Wysocki
2009-04-08 8:46 ` Justin Mattock
2009-04-08 14:40 ` Clemens Ladisch
2009-04-08 15:58 ` Justin Mattock [this message]
2009-04-13 13:36 ` Takashi Iwai
2009-04-13 15:18 ` Justin Mattock
2009-04-13 17:02 ` Justin Mattock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd18b0c30904080858s1e41d5ebjda2d59ad74b6543e@mail.gmail.com \
--to=justinmattock@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=clemens@ladisch.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®