Re: [PATCH v2 1/3] dt-bindings: display: ti,am65x-dss: Add am62p dss compatible

[Swamil Jain <s-jain1@ti.com>]

On 11/27/25 13:15, Krzysztof Kozlowski wrote:
> On Tue, Nov 25, 2025 at 10:29:40PM +0530, Swamil Jain wrote:
>> TI's AM62P SoC contains two instances of the TI Keystone Display
>> SubSystem (DSS), each with two video ports and two video planes. These
>> instances support up to three independent video streams through OLDI,
>> DPI, and DSI interfaces.
>>
>> DSS0 (first instance) supports:
>>   - Two OLDI transmitters on video port 1, configurable in dual-link or
>>     single-link mode.
>>   - DPI output on video port 2.
>>
>> DSS1 (second instance) supports:
>>   - One OLDI transmitter on video port 1 (single-link mode only).
>>   - DSI controller output on video port 2.
>>
>> The two OLDI transmitters can be configured in clone mode to drive a
>> pair of identical OLDI single-link displays. DPI outputs from
>> DSS0 VP2, DSS1 VP1, and DSS1 VP2 are multiplexed, allowing only one
>> DPI output at a time.
>>
>> Add the compatible string "ti,am62p-dss" and update related
>> description accordingly.
>>
>> AM62P has different power domains for DSS and OLDI compared to other
>> Keystone SoCs. Therefore, add 'minItems' and set to 1 and 'maxItems'
>> field in the power-domains property to 3 for the "ti,am62p-dss"
>> compatible entry to reflect this hardware difference.
>>
>> Signed-off-by: Swamil Jain <s-jain1@ti.com>
>> ---
>>   .../bindings/display/ti/ti,am65x-dss.yaml     | 25 +++++++++++++++++++
>>   1 file changed, 25 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
>> index 361e9cae6896..3945ae048b8f 100644
>> --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
>> +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
>> @@ -24,6 +24,19 @@ description: |
>>     DPI signals are also routed internally to DSI Tx controller present within the
>>     SoC. Due to clocking limitations only one of the interface i.e. either DSI or
>>     DPI can be used at once.
>> +  The AM62P has two instances of TI Keystone Display SubSystem, each with two
>> +  video ports and two video planes. These instances can support up to 3
>> +  independent video streams through OLDI, DPI, and DSI interfaces.
>> +  DSS0 (first instance) supports:
>> +    - Two OLDI TXes on video port 1, configurable in dual-link or
>> +      single link clone mode
>> +    - DPI output on video port 2
>> +  DSS1 (second instance) supports:
>> +    - One OLDI TX on video port 1 (single-link mode only)
>> +    - DSI controller output on video port 2
>> +  The two OLDI TXes can be configured in clone mode to drive a pair of
>> +  identical OLDI single-link displays. DPI outputs from DSS0 VP2, DSS1 VP1,
>> +  and DSS1 VP2 are muxed, allowing only one DPI output at a time.
>>   
>>   properties:
>>     compatible:
>> @@ -31,6 +44,7 @@ properties:
>>         - ti,am625-dss
>>         - ti,am62a7-dss
>>         - ti,am62l-dss
>> +      - ti,am62p-dss
>>         - ti,am65x-dss
>>   
>>     reg:
>> @@ -197,6 +211,17 @@ allOf:
>>                 properties:
>>                   endpoint@1: false
>>   
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: ti,am62p-dss
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          minItems: 1
>> +          maxItems: 3
> 
> This is conflicting with top-level constraints. You need to update these
> and then narrow each variants. See also writing schema (Property Schema
> chapter).

Thanks Krzysztof, will update it in the next revision.

Regards,
Swamil

> 
> Best regards,
> Krzysztof
>