From: Dhruva Gole <d-gole@ti.com>
To: Tomas Winkler <tomas.winkler@intel.com>,
Tudor Ambarus <tudor.ambarus@microchip.com>,
Pratyush Yadav <pratyush@kernel.org>,
Michael Walle <michael@walle.cc>, <linux-mtd@lists.infradead.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>,
Richard Weinberger <richard@nod.at>,
Vignesh Raghavendra <vigneshr@ti.com>,
<linux-kernel@vger.kernel.org>,
Alexander Usyskin <alexander.usyskin@intel.com>
Subject: Re: [PATCH v2] mtd: spi-nor: macronix: add support for mx77l51250f
Date: Mon, 9 Jan 2023 10:34:18 +0530 [thread overview]
Message-ID: <dd6c7345-4635-dc26-dd25-153c87b4b336@ti.com> (raw)
In-Reply-To: <20230107214345.2524851-1-tomas.winkler@intel.com>
Hey Tomas,
On 08/01/23 03:13, Tomas Winkler wrote:
> Add support for mx77l51250f spi-nor chips.
>
> SPI NOR sysfs:
>
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
> mx77l51250f
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
> c2751a
> $ cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
> macronix
> $ xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 53464450060103ff00060110300000ffc2000104100100ff030001020001
> 00ff84000102c00000ffffffffffffffffffe520f3ffffffff1f44eb086b
> 083b04bbeeffffffffff00ffffff00ff0c200f5210d800ff8341bd0082a7
> 04db4403373830b030b0f7a9d55c009e29fff050f985ffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffff7f0ff0ff215cdcffffffffffffffffffffff
> ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
> ffffffffffffffffffffffffffffffff3c9b96f0c5a4c2ffffffffffffff
> ffff003600279df9c064fecfffffffffffff
>
> $ md5sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
> 36fb8e3e6f82c45bfabea45ec73c08a8
> /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
>
> Note: The test_qspi.sh wasn not run as this device in intel setup is used
> for BIOS and platform firmware storage.
Thanks for doing the testing but one small suggestion, move this below
the "---" lines before sending the patch email.
>
> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
> ---
For the code and idea itself, pending the changes I have advised below.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
> V2:
> 1. This chip supports SFDP, parse it instead of the manual configuration.
This sounds good! Do the other flashes in macronix_nor_parts support
this? Maybe they can be updated in some later patches as well if they do
support SFDP Parsing.
> 2. Add required output of sysfs attributes
Yes, but I am not sure in this is the way to do it in the commit body
itself.
When Tudor asked you for those test logs, I think he meant for you to
paste it in the cover letter, or below here not in the patch email. Not
in the commit body.
Refer
https://lore.kernel.org/all/cover.1661915569.git.Takahiro.Kuwano@infineon.com/
where Takahiro has provided the tested details for ID, SFDP, Test logs.
>
> drivers/mtd/spi-nor/macronix.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
> index 6853ec9ae65d..6c3b4192a8ae 100644
> --- a/drivers/mtd/spi-nor/macronix.c
> +++ b/drivers/mtd/spi-nor/macronix.c
> @@ -100,6 +100,8 @@ static const struct flash_info macronix_nor_parts[] = {
> { "mx66u2g45g", INFO(0xc2253c, 0, 64 * 1024, 4096)
> NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)
> FIXUP_FLAGS(SPI_NOR_4B_OPCODES) },
> + { "mx77l51250f", INFO(0xc2751a, 0, 64 * 1024, 4096)
> + PARSE_SFDP },
> };
>
> static void macronix_nor_default_init(struct spi_nor *nor)
--
Thanks and Regards,
Dhruva Gole
next prev parent reply other threads:[~2023-01-09 5:04 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-07 21:43 Tomas Winkler
2023-01-09 5:04 ` Dhruva Gole [this message]
2023-01-09 8:49 ` Michael Walle
2023-01-09 14:09 ` Usyskin, Alexander
2023-01-09 14:20 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dd6c7345-4635-dc26-dd25-153c87b4b336@ti.com \
--to=d-gole@ti.com \
--cc=alexander.usyskin@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=michael@walle.cc \
--cc=miquel.raynal@bootlin.com \
--cc=pratyush@kernel.org \
--cc=richard@nod.at \
--cc=tomas.winkler@intel.com \
--cc=tudor.ambarus@microchip.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®