On Tue, 18 Aug 2026, Thorsten Blum wrote:

> On Tue, Aug 18, 2026 at 02:28:50PM +0300, Ilpo Järvinen wrote:
> > On Thu, 13 Aug 2026, Thorsten Blum wrote:
> > > current_password_store() checks the password length before removing the
> > > trailing newline, which can reject valid passwords that are exactly
> > > ->maxlen bytes long.
> > > 
> > > It also passes ->maxlen to strscpy(), which truncates passwords without
> > > a newline.
> > > 
> > > Use strchrnul() to measure the password length up to the newline, then
> > > copy that many bytes and add a trailing NUL terminator.
> > > 
> > > Fixes: a40cd7ef22fb ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
> > > Cc: stable@vger.kernel.org
> > > Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
> > > ---
> > > Changes in v2:
> > > - Keep and reword the newline comment
> > > - v1: https://lore.kernel.org/r/20260810132018.156868-3-thorsten.blum@linux.dev/
> > > ---
> > >  drivers/platform/x86/lenovo/think-lmi.c | 8 ++++----
> > >  1 file changed, 4 insertions(+), 4 deletions(-)
> > > 
> > > diff --git a/drivers/platform/x86/lenovo/think-lmi.c b/drivers/platform/x86/lenovo/think-lmi.c
> > > index e215e86e3db7..d0ceb6aaa69e 100644
> > > --- a/drivers/platform/x86/lenovo/think-lmi.c
> > > +++ b/drivers/platform/x86/lenovo/think-lmi.c
> > > @@ -438,14 +438,14 @@ static ssize_t current_password_store(struct kobject *kobj,
> > >  	struct tlmi_pwd_setting *setting = to_tlmi_pwd_setting(kobj);
> > >  	size_t pwdlen;
> > >  
> > > -	pwdlen = strlen(buf);
> > > +	/* Strip newline; setting password won't work if one is present. */
> > > +	pwdlen = strchrnul(buf, '\n') - buf;
> > >  	/* pwdlen == 0 is allowed to clear the password */
> > >  	if (pwdlen && ((pwdlen < setting->minlen) || (pwdlen > setting->maxlen)))
> > >  		return -EINVAL;
> > >  
> > > -	strscpy(setting->password, buf, setting->maxlen);
> > > -	/* Strip out CR if one is present, setting password won't work if it is present */
> > > -	strreplace(setting->password, '\n', '\0');
> > > +	memcpy(setting->password, buf, pwdlen);
> > > +	setting->password[pwdlen] = '\0';
> > 
> > Hi,
> > 
> > I don't understand why is this strscpy() -> memcpy() conversion required? 
> 
> It's not required, strscpy() would also work.
> 
> > Wouldn't it work with:
> > 
> > 	strscpy(..., pwdlen);
> > 
> > ?
> 
> However, strscpy(setting->password, buf, pwdlen) wouldn't work because
> pwdlen is the number of characters to copy, but the destination buffer
> size also needs to include room for the NUL terminator. Since there is
> no NUL before pwdlen, it would copy only pwdlen - 1 characters and set
> setting->password[pwdlen - 1] = '\0'.

Okay, I was thinking in my mind if I've a off-by-one error in my 
suggestion but didn't want to spend too much time on figuring it out.

> strscpy(setting->password, buf, pwdlen + 1) would work, but since we
> already know that exactly pwdlen bytes need to be copied, memcpy() is
> sufficient.

It may work, but since you then go to nul terminate it yourself, I think 
using the existing function is way better than memcpy() + custom nul 
termination code.

-- 
 i.