Re: [PATCH 2/2] Disable touchpad on firmware level while not in use

[Werner Sembach <wse@tuxedocomputers.com>]

Hi,

Am 11.02.25 um 14:39 schrieb Werner Sembach:
> Using the new on_hid_hw_open and on_hid_hw_close functions to disable the
> touchpad on firmware level while not being in use.
>
> This safes some battery and triggers touchpad-disabled-leds hardwired to
> the touchpads firmware, that exist for example on some TongFang barebones.
>
> For a lengthy discussion with all the details see
> https://gitlab.freedesktop.org/libinput/libinput/-/issues/558

Any comments if this is a good idea or not?

Best regards,

Werner

> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
> ---
>   drivers/hid/hid-multitouch.c | 12 ++++++++++++
>   1 file changed, 12 insertions(+)
>
> diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c
> index 82900857bfd87..7289c04f47f17 100644
> --- a/drivers/hid/hid-multitouch.c
> +++ b/drivers/hid/hid-multitouch.c
> @@ -1884,6 +1884,16 @@ static void mt_remove(struct hid_device *hdev)
>   	hid_hw_stop(hdev);
>   }
>   
> +static void mt_on_hid_hw_open(struct hid_device *hdev)
> +{
> +	mt_set_modes(hdev, HID_LATENCY_NORMAL, TOUCHPAD_REPORT_ALL);
> +}
> +
> +static void mt_on_hid_hw_close(struct hid_device *hdev)
> +{
> +	mt_set_modes(hdev, HID_LATENCY_HIGH, TOUCHPAD_REPORT_NONE);
> +}
> +
>   /*
>    * This list contains only:
>    * - VID/PID of products not working with the default multitouch handling
> @@ -2351,5 +2361,7 @@ static struct hid_driver mt_driver = {
>   	.suspend = pm_ptr(mt_suspend),
>   	.reset_resume = pm_ptr(mt_reset_resume),
>   	.resume = pm_ptr(mt_resume),
> +	.on_hid_hw_open = mt_on_hid_hw_open,
> +	.on_hid_hw_close = mt_on_hid_hw_close,
>   };
>   module_hid_driver(mt_driver);