From: Matti Vaittinen <mazziesaccount@gmail.com>
To: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>,
Bjorn Andersson <andersson@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Guenter Roeck <linux@roeck-us.net>,
Josh Cartwright <joshc@codeaurora.org>,
Bartosz Golaszewski <bartosz.golaszewski@linaro.org>,
Doug Anderson <dianders@chromium.org>,
Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] gpiolib: don't crash on enabling GPIO HOG pins
Date: Wed, 14 May 2025 10:00:39 +0300 [thread overview]
Message-ID: <df3788e9-f4ea-4c4b-bb77-20393e914df4@gmail.com> (raw)
In-Reply-To: <20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com>
On 13/05/2025 21:38, Dmitry Baryshkov wrote:
> On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
> calls gpiochip_line_is_valid(). After commit 8015443e24e7 ("gpio: Hide
> valid_mask from direct assignments") gpiochip_line_is_valid() uses
> gc->gpiodev, which is NULL when GPIO hog pins are being processed.
> Thus after this commit using GPIO hogs causes the following crash. In
> order to fix this, verify that gc->gpiodev is not NULL.
>
> Note: it is not possible to reorder calls (e.g. by calling
> msm_gpio_init() before pinctrl registration or by splitting
> pinctrl_register() into _and_init() and pinctrl_enable() and calling the
> latter function after msm_gpio_init()) because GPIO chip registration
> would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
> registration.
>
> pc : gpiochip_line_is_valid+0x4/0x28
> lr : msm_pinmux_request+0x24/0x40
> sp : ffff8000808eb870
> x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
> x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
> x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
> x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
> x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
> x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
> x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
> x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
> x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
> x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
> Call trace:
> gpiochip_line_is_valid+0x4/0x28 (P)
> pin_request+0x208/0x2c0
> pinmux_enable_setting+0xa0/0x2e0
> pinctrl_commit_state+0x150/0x26c
> pinctrl_enable+0x6c/0x2a4
> pinctrl_register+0x3c/0xb0
> devm_pinctrl_register+0x58/0xa0
> msm_pinctrl_probe+0x2a8/0x584
> sdm845_pinctrl_probe+0x20/0x88
> platform_probe+0x68/0xc0
> really_probe+0xbc/0x298
> __driver_probe_device+0x78/0x12c
> driver_probe_device+0x3c/0x160
> __device_attach_driver+0xb8/0x138
> bus_for_each_drv+0x84/0xe0
> __device_attach+0x9c/0x188
> device_initial_probe+0x14/0x20
> bus_probe_device+0xac/0xb0
> deferred_probe_work_func+0x8c/0xc8
> process_one_work+0x208/0x5e8
> worker_thread+0x1b4/0x35c
> kthread+0x144/0x220
> ret_from_fork+0x10/0x20
> Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
>
> Fixes: 8015443e24e7 ("gpio: Hide valid_mask from direct assignments")
> Reported-by: Doug Anderson <dianders@chromium.org>
> Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
> Tested-by: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
> ---
> drivers/gpio/gpiolib.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> index c787c9310e85af4c22ffc9bb8e791931fd056c89..250d47f77e2bc678b83f51958ca1bcc4db42928f 100644
> --- a/drivers/gpio/gpiolib.c
> +++ b/drivers/gpio/gpiolib.c
> @@ -784,6 +784,12 @@ EXPORT_SYMBOL_GPL(gpiochip_query_valid_mask);
> bool gpiochip_line_is_valid(const struct gpio_chip *gc,
> unsigned int offset)
> {
> + /*
> + * hog pins are requested before registering GPIO chip
> + */
> + if (!gc->gpiodev)
> + return true;
> +
> /* No mask means all valid */
> if (likely(!gc->gpiodev->valid_mask))
> return true;
>
next prev parent reply other threads:[~2025-05-14 7:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-13 18:38 [PATCH v2 0/3] pinctrl: qcom: several fixes for the pinctrl-msm code Dmitry Baryshkov
2025-05-13 18:38 ` [PATCH v2 1/3] gpiolib: don't crash on enabling GPIO HOG pins Dmitry Baryshkov
2025-05-13 22:18 ` Linus Walleij
2025-05-14 9:57 ` Bartosz Golaszewski
2025-05-14 7:00 ` Matti Vaittinen [this message]
2025-05-14 14:30 ` Doug Anderson
2025-05-13 18:38 ` [PATCH v2 2/3] pinctrl: qcom: switch to devm_register_sys_off_handler() Dmitry Baryshkov
2025-05-13 18:38 ` [PATCH v2 3/3] pinctrl: qcom: switch to devm_gpiochip_add_data() Dmitry Baryshkov
2025-05-20 21:43 ` [PATCH v2 0/3] pinctrl: qcom: several fixes for the pinctrl-msm code Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df3788e9-f4ea-4c4b-bb77-20393e914df4@gmail.com \
--to=mazziesaccount@gmail.com \
--cc=andersson@kernel.org \
--cc=bartosz.golaszewski@linaro.org \
--cc=brgl@bgdev.pl \
--cc=dianders@chromium.org \
--cc=dmitry.baryshkov@oss.qualcomm.com \
--cc=joshc@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®