From: Daniel Golle <daniel@makrotopia.org>
To: linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/2] phy: phy-mtk-tphy: Add PCIe 2 lane efuse support
Date: Wed, 19 Oct 2022 16:37:44 +0100 [thread overview]
Message-ID: <df51b63add2830d91b527db64fba6ffdb7765f5d.1666193782.git.daniel@makrotopia.org> (raw)
From: Zhanyong Wang <zhanyong.wang@mediatek.com>
Add PCIe 2 lane efuse support in tphy driver.
Signed-off-by: Jie Yang <jieyy.yang@mediatek.com>
Signed-off-by: Zhanyong Wang <zhanyong.wang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/phy/mediatek/phy-mtk-tphy.c | 112 ++++++++++++++++++++++++++++
1 file changed, 112 insertions(+)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e906a82791bdaa..b0c9834efec7ef 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -43,6 +43,15 @@
#define SSUSB_SIFSLV_V2_U3PHYD 0x200
#define SSUSB_SIFSLV_V2_U3PHYA 0x400
+/* version V4 sub-banks offset base address */
+/* pcie phy banks */
+#define SSUSB_SIFSLV_V4_SPLLC 0x000
+#define SSUSB_SIFSLV_V4_CHIP 0x100
+#define SSUSB_SIFSLV_V4_U3PHYD 0x900
+#define SSUSB_SIFSLV_V4_U3PHYA 0xb00
+
+#define SSUSB_LN1_OFFSET 0x10000
+
#define U3P_MISC_REG1 0x04
#define MR1_EFUSE_AUTO_LOAD_DIS BIT(6)
@@ -268,6 +277,7 @@ enum mtk_phy_version {
MTK_PHY_V1 = 1,
MTK_PHY_V2,
MTK_PHY_V3,
+ MTK_PHY_V4,
};
struct mtk_phy_pdata {
@@ -317,6 +327,9 @@ struct mtk_phy_instance {
u32 efuse_intr;
u32 efuse_tx_imp;
u32 efuse_rx_imp;
+ u32 efuse_intr_ln1;
+ u32 efuse_tx_imp_ln1;
+ u32 efuse_rx_imp_ln1;
int eye_src;
int eye_vrt;
int eye_term;
@@ -760,6 +773,36 @@ static void phy_v2_banks_init(struct mtk_tphy *tphy,
}
}
+static void phy_v4_banks_init(struct mtk_tphy *tphy,
+ struct mtk_phy_instance *instance)
+{
+ struct u2phy_banks *u2_banks = &instance->u2_banks;
+ struct u3phy_banks *u3_banks = &instance->u3_banks;
+
+ switch (instance->type) {
+ case PHY_TYPE_USB2:
+ u2_banks->misc = instance->port_base + SSUSB_SIFSLV_V2_MISC;
+ u2_banks->fmreg = instance->port_base + SSUSB_SIFSLV_V2_U2FREQ;
+ u2_banks->com = instance->port_base + SSUSB_SIFSLV_V2_U2PHY_COM;
+ break;
+ case PHY_TYPE_USB3:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V2_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V2_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V2_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V2_U3PHYA;
+ break;
+ case PHY_TYPE_PCIE:
+ u3_banks->spllc = instance->port_base + SSUSB_SIFSLV_V4_SPLLC;
+ u3_banks->chip = instance->port_base + SSUSB_SIFSLV_V4_CHIP;
+ u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V4_U3PHYD;
+ u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V4_U3PHYA;
+ break;
+ default:
+ dev_err(tphy->dev, "incompatible PHY type\n");
+ return;
+ }
+}
+
static void phy_parse_property(struct mtk_tphy *tphy,
struct mtk_phy_instance *instance)
{
@@ -951,6 +994,40 @@ static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instanc
dev_dbg(dev, "u3 efuse - intr %x, rx_imp %x, tx_imp %x\n",
instance->efuse_intr, instance->efuse_rx_imp,instance->efuse_tx_imp);
+
+ if (tphy->pdata->version != MTK_PHY_V4)
+ break;
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "intr_ln1", &instance->efuse_intr_ln1);
+ if (ret) {
+ dev_err(dev, "fail to get u3 lane1 intr efuse, %d\n", ret);
+ break;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "rx_imp_ln1", &instance->efuse_rx_imp_ln1);
+ if (ret) {
+ dev_err(dev, "fail to get u3 lane1 rx_imp efuse, %d\n", ret);
+ break;
+ }
+
+ ret = nvmem_cell_read_variable_le_u32(dev, "tx_imp_ln1", &instance->efuse_tx_imp_ln1);
+ if (ret) {
+ dev_err(dev, "fail to get u3 lane1 tx_imp efuse, %d\n", ret);
+ break;
+ }
+
+ /* no efuse, ignore it */
+ if (!instance->efuse_intr_ln1 &&
+ !instance->efuse_rx_imp_ln1 &&
+ !instance->efuse_tx_imp_ln1) {
+ dev_warn(dev, "no u3 lane1 efuse, but dts enable it\n");
+ instance->efuse_sw_en = 0;
+ break;
+ }
+
+ dev_info(dev, "u3 lane1 efuse - intr %x, rx_imp %x, tx_imp %x\n",
+ instance->efuse_intr_ln1, instance->efuse_rx_imp_ln1,
+ instance->efuse_tx_imp_ln1);
break;
default:
dev_err(dev, "no sw efuse for type %d\n", instance->type);
@@ -990,6 +1067,31 @@ static void phy_efuse_set(struct mtk_phy_instance *instance)
mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR,
instance->efuse_intr);
+ if (instance->type == PHY_TYPE_USB3 || (
+ !instance->efuse_intr_ln1 &&
+ !instance->efuse_rx_imp_ln1 &&
+ !instance->efuse_tx_imp_ln1))
+ break;
+
+ mtk_phy_set_bits(u3_banks->phyd + SSUSB_LN1_OFFSET + U3P_U3_PHYD_RSV,
+ P3D_RG_EFUSE_AUTO_LOAD_DIS);
+
+ mtk_phy_update_field(u3_banks->phyd + SSUSB_LN1_OFFSET + U3P_U3_PHYD_IMPCAL0,
+ P3D_RG_TX_IMPEL, instance->efuse_tx_imp_ln1);
+ mtk_phy_set_bits(u3_banks->phyd + SSUSB_LN1_OFFSET + U3P_U3_PHYD_IMPCAL0,
+ P3D_RG_FORCE_TX_IMPEL);
+
+ mtk_phy_update_field(u3_banks->phyd + SSUSB_LN1_OFFSET + U3P_U3_PHYD_IMPCAL1,
+ P3D_RG_RX_IMPEL, instance->efuse_rx_imp_ln1);
+ mtk_phy_set_bits(u3_banks->phyd + SSUSB_LN1_OFFSET + U3P_U3_PHYD_IMPCAL1,
+ P3D_RG_FORCE_RX_IMPEL);
+
+ mtk_phy_update_field(u3_banks->phya + SSUSB_LN1_OFFSET + U3P_U3_PHYA_REG0,
+ P3A_RG_IEXT_INTR, instance->efuse_intr_ln1);
+
+ dev_info(dev, "%s set LN1 efuse, tx_imp %x, rx_imp %x intr %x\n",
+ __func__, instance->efuse_tx_imp_ln1,
+ instance->efuse_rx_imp_ln1, instance->efuse_intr_ln1);
break;
default:
dev_warn(dev, "no sw efuse for type %d\n", instance->type);
@@ -1129,6 +1231,9 @@ static struct phy *mtk_phy_xlate(struct device *dev,
case MTK_PHY_V3:
phy_v2_banks_init(tphy, instance);
break;
+ case MTK_PHY_V4:
+ phy_v4_banks_init(tphy, instance);
+ break;
default:
dev_err(dev, "phy version is not supported\n");
return ERR_PTR(-EINVAL);
@@ -1169,6 +1274,12 @@ static const struct mtk_phy_pdata tphy_v3_pdata = {
.version = MTK_PHY_V3,
};
+static const struct mtk_phy_pdata tphy_v4_pdata = {
+ .avoid_rx_sen_degradation = false,
+ .sw_efuse_supported = true,
+ .version = MTK_PHY_V4,
+};
+
static const struct mtk_phy_pdata mt8173_pdata = {
.avoid_rx_sen_degradation = true,
.version = MTK_PHY_V1,
@@ -1188,6 +1299,7 @@ static const struct of_device_id mtk_tphy_id_table[] = {
{ .compatible = "mediatek,generic-tphy-v1", .data = &tphy_v1_pdata },
{ .compatible = "mediatek,generic-tphy-v2", .data = &tphy_v2_pdata },
{ .compatible = "mediatek,generic-tphy-v3", .data = &tphy_v3_pdata },
+ { .compatible = "mediatek,generic-tphy-v4", .data = &tphy_v4_pdata },
{ },
};
MODULE_DEVICE_TABLE(of, mtk_tphy_id_table);
--
2.37.3
next reply other threads:[~2022-10-19 15:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-19 15:37 Daniel Golle [this message]
2022-10-19 15:38 ` [PATCH 2/2] dt-bindings: phy: mediatek: tphy: add compatible for tphy-v4 Daniel Golle
2022-10-21 1:56 ` Rob Herring
2022-10-21 6:14 ` Chunfeng Yun
2022-10-21 2:23 ` [PATCH 1/2] phy: phy-mtk-tphy: Add PCIe 2 lane efuse support Sam Shih
2022-10-21 6:11 ` Chunfeng Yun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df51b63add2830d91b527db64fba6ffdb7765f5d.1666193782.git.daniel@makrotopia.org \
--to=daniel@makrotopia.org \
--cc=chunfeng.yun@mediatek.com \
--cc=kishon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®