From: Hans Verkuil <hverkuil@xs4all.nl>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Hans Verkuil <hans.verkuil@cisco.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org, Andrzej Hajda <a.hajda@samsung.com>,
Chen-Yu Tsai <wens@csie.org>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>
Subject: Re: [PATCH 0/5] media: Allwinner A10 CSI support
Date: Tue, 13 Nov 2018 13:30:49 +0100 [thread overview]
Message-ID: <df54f2e6-e207-92de-767a-e356345a1a56@xs4all.nl> (raw)
In-Reply-To: <cover.71b0f9855c251f9dc389ee77ee6f0e1fad91fb0b.1542097288.git-series.maxime.ripard@bootlin.com>
On 11/13/18 09:24, Maxime Ripard wrote:
> Hi,
>
> Here is a series introducing the support for the A10 (and SoCs of the same
> generation) CMOS Sensor Interface (called CSI, not to be confused with
> MIPI-CSI, which isn't support by that IP).
>
> That interface is pretty straightforward, but the driver has a few issues
> that I wanted to bring up:
>
> * The only board I've been testing this with has an ov5640 sensor
> attached, which doesn't work with the upstream driver. Copying the
> Allwinner init sequence works though, and this is how it has been
> tested. Testing with a second sensor would allow to see if it's an
> issue on the CSI side or the sensor side.
> * When starting a capture, the last buffer to capture will fail due to
> double buffering being used, and we don't have a next buffer for the
> last frame. I'm not sure how to deal with that though. It seems like
> some drivers use a scratch buffer in such a case, some don't care, so
> I'm not sure which solution should be preferred.
> * We don't have support for the ISP at the moment, but this can be added
> eventually.
>
> * How to model the CSI module clock isn't really clear to me. It looks
> like it goes through the CSI controller and then is muxed to one of the
> CSI pin so that it can clock the sensor. I'm not quite sure how to
> model it, if it should be a clock, the CSI driver being a clock
> provider, or if the sensor should just use the module clock directly.
>
> Here is the v4l2-compliance output:
Test v4l2-compliance with the -s option so you test streaming as well.
Even better is -f where it tests streaming with all available formats.
> v4l2-compliance SHA : 339d550e92ac15de8668f32d66d16f198137006c
Hmm, I can't find this SHA. Was this built from the main v4l-utils repo?
Regards,
Hans
>
> Driver Info:
> Driver name : sun4i_csi
> Card type : sun4i-csi
> Bus info : platform:1c09000.csi
> Driver version: 4.19.0
> Capabilities : 0x84201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x04201000
> Video Capture Multiplanar
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
> test VIDIOC_G/S_EDID: OK (Not Supported)
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
> test VIDIOC_QUERYCTRL: OK (Not Supported)
> test VIDIOC_G/S_CTRL: OK (Not Supported)
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 0 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK (Not Supported)
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK
>
> Test input 0:
>
> Total: 43, Succeeded: 43, Failed: 0, Warnings: 0
>
> Let me know what you think,
> Maxime
>
> Maxime Ripard (5):
> dt-bindings: media: Add Allwinner A10 CSI binding
> media: sunxi: Refactor the Makefile and Kconfig
> media: sunxi: Add A10 CSI driver
> ARM: dts: sun7i: Add CSI0 controller
> DO NOT MERGE: ARM: dts: bananapi: Add Camera support
>
> Documentation/devicetree/bindings/media/sun4i-csi.txt | 71 ++-
> arch/arm/boot/dts/sun7i-a20-bananapi.dts | 98 +++-
> arch/arm/boot/dts/sun7i-a20.dtsi | 13 +-
> drivers/media/platform/Kconfig | 2 +-
> drivers/media/platform/Makefile | 2 +-
> drivers/media/platform/sunxi/Kconfig | 2 +-
> drivers/media/platform/sunxi/Makefile | 2 +-
> drivers/media/platform/sunxi/sun4i-csi/Kconfig | 12 +-
> drivers/media/platform/sunxi/sun4i-csi/Makefile | 5 +-
> drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c | 275 ++++++++-
> drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h | 137 ++++-
> drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c | 383 +++++++++++-
> drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c | 287 ++++++++-
> 13 files changed, 1287 insertions(+), 2 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/media/sun4i-csi.txt
> create mode 100644 drivers/media/platform/sunxi/Kconfig
> create mode 100644 drivers/media/platform/sunxi/Makefile
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/Kconfig
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/Makefile
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.c
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/sun4i_csi.h
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/sun4i_dma.c
> create mode 100644 drivers/media/platform/sunxi/sun4i-csi/sun4i_v4l2.c
>
> base-commit: 94517eaa3d43005472864615dfd17f1ef6ca3935
>
next prev parent reply other threads:[~2018-11-13 12:30 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-13 8:24 Maxime Ripard
2018-11-13 8:24 ` [PATCH 1/5] dt-bindings: media: Add Allwinner A10 CSI binding Maxime Ripard
2018-11-13 8:38 ` Sakari Ailus
2018-11-15 19:04 ` Maxime Ripard
2018-11-21 21:56 ` Sakari Ailus
2018-11-27 15:04 ` Maxime Ripard
2018-11-13 10:34 ` Sakari Ailus
2018-11-13 8:24 ` [PATCH 2/5] media: sunxi: Refactor the Makefile and Kconfig Maxime Ripard
2018-11-13 8:24 ` [PATCH 3/5] media: sunxi: Add A10 CSI driver Maxime Ripard
2018-11-13 8:57 ` Sakari Ailus
2018-11-13 12:24 ` Hans Verkuil
2018-11-13 15:19 ` Joe Perches
2018-11-13 15:39 ` Hans Verkuil
2018-11-15 20:51 ` Maxime Ripard
2018-11-21 22:01 ` Sakari Ailus
2018-11-22 13:58 ` Maxime Ripard
2018-11-13 12:48 ` Fabio Estevam
2018-11-13 13:37 ` Hans Verkuil
2018-11-13 14:13 ` Fabio Estevam
2018-11-13 14:46 ` Thomas Petazzoni
2018-11-13 8:24 ` [PATCH 4/5] ARM: dts: sun7i: Add CSI0 controller Maxime Ripard
2018-11-13 8:24 ` [PATCH 5/5] DO NOT MERGE: ARM: dts: bananapi: Add Camera support Maxime Ripard
2018-11-27 6:56 ` Jagan Teki
2018-11-27 10:31 ` Maxime Ripard
2018-11-27 11:00 ` Jagan Teki
2018-11-27 15:19 ` Maxime Ripard
2018-11-27 15:34 ` Jagan Teki
2018-11-13 12:30 ` Hans Verkuil [this message]
2018-11-13 13:52 ` [PATCH 0/5] media: Allwinner A10 CSI support Maxime Ripard
2018-11-13 14:01 ` Hans Verkuil
2018-11-13 15:52 ` Maxime Ripard
2018-11-13 16:00 ` Hans Verkuil
2018-11-13 16:55 ` Thomas Petazzoni
2018-11-13 17:15 ` Hans Verkuil
2018-11-14 3:24 ` Chen-Yu Tsai
2018-11-15 19:10 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=df54f2e6-e207-92de-767a-e356345a1a56@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=a.hajda@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=hans.verkuil@cisco.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®