Re: [PATCH RFC net-next 2/3] dt-bindings: net: mscc-miim: add clock and clock-frequency

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 31/03/2022 17:14, Michael Walle wrote:
> Add the (optional) clock input of the MDIO controller and indicate that
> the common clock-frequency property is supported. The driver can use it
> to set the desired MDIO bus frequency.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  Documentation/devicetree/bindings/net/mscc,miim.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml
> index b52bf1732755..e9e8ddcdade9 100644
> --- a/Documentation/devicetree/bindings/net/mscc,miim.yaml
> +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml
> @@ -32,6 +32,11 @@ properties:
>  
>    interrupts: true
>  
> +  clocks:
> +    maxItems: 1
> +
> +  clock-frequency: true

This looks unusual clock-frequency is usually for clock providers but
this is a consumer, so it is not a common frequency here. You mention
that "driver can use it", so it's not a hardware description but some
feature for the driver. We have this already - use assigned-clock* in
your DTS.

Best regards,
Krzysztof