From: Lukasz Stelmach <l.stelmach@samsung.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: "Alessandro Zummo" <a.zummo@towertech.it>,
linux-rtc@vger.kernel.org,
"Bartłomiej Żolnierkiewicz" <b.zolnierkie@samsung.com>,
"Marek Szyprowski" <m.szyprowski@samsung.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] rtc: ds1307: set uie_unsupported if no interrupt is available
Date: Tue, 16 Mar 2021 13:12:08 +0100 [thread overview]
Message-ID: <dleftj1rcfe1rb.fsf%l.stelmach@samsung.com> (raw)
In-Reply-To: <YE/ZLtdK0ZlVFOhp@piout.net> (Alexandre Belloni's message of "Mon, 15 Mar 2021 23:01:18 +0100")
[-- Attachment #1: Type: text/plain, Size: 4188 bytes --]
It was <2021-03-15 pon 23:01>, when Alexandre Belloni wrote:
> Hello,
>
> On 05/03/2021 18:44:11+0100, Łukasz Stelmach wrote:
>> For an RTC without an IRQ assigned rtc_update_irq_enable() should
>> return -EINVAL. It will, when uie_unsupported is set.
>>
>
> I'm surprised this is an issue because the current code seems to cover
> all cases:
>
> - no irq and not wakeup-source => set_alarm should fail
> - no irq and wakeup-source => uie_unsupported is set
> - irq => UIE should work
>
> Can you elaborate on your failing use case?
I've got ds3231 which supports alarms[1] but is not connected to any
interrupt line. Hence, client->irq is 0 as well as want_irq[2]. There
is also no other indirect connection, so I don't set wakeup-source
property and ds1307_can_wakeup_device remains[3] false. Under these
conditions
want_irq = 0
ds1307_can_wakeup_device = false
uie_unsupported remains[4] false. And this is the problem.
hwclock(8) when setting system clock from rtc (--hctosys) calls
synchronize_to_clock_tick_rtc()[5]. There goes
ioctl(rtc_fd, RTC_UIE_ON, 0);
which leads us to
rtc_update_irq_enable(rtc, 1);
and finally here [6]
if (rtc->uie_unsupported) {
err = -EINVAL;
goto out;
}
and we keep going (uie_unsupported = 0). All the following operations
succeed because chip supports alarms.
We go back to hwclock(8) and we start waiting[7] for the update from
interrupt which never arrives instead of calling
busywiat_for_rtc_clock_tick()[8] (mind the invalid indentation) because
of EINVAL returned from ioctl() (conf. [6])
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/rtc/rtc-ds1307.c?h=v5.11#n1032
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/rtc/rtc-ds1307.c?h=v5.11#n1779
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/rtc/rtc-ds1307.c?h=v5.11#n1802
[4] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/rtc/rtc-ds1307.c?h=v5.11#n1977
[5] https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/tree/sys-utils/hwclock-rtc.c?h=v2.36.2#n252
[6] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/rtc/interface.c?h=v5.11#n564
[7] https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/tree/sys-utils/hwclock-rtc.c?h=v2.36.2#n283
[8] https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/tree/sys-utils/hwclock-rtc.c?h=v2.36.2#n297
>> Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
>> ---
>> drivers/rtc/rtc-ds1307.c | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c
>> index cd8e438bc9c4..b08a9736fa77 100644
>> --- a/drivers/rtc/rtc-ds1307.c
>> +++ b/drivers/rtc/rtc-ds1307.c
>> @@ -1973,13 +1973,6 @@ static int ds1307_probe(struct i2c_client *client,
>> if (IS_ERR(ds1307->rtc))
>> return PTR_ERR(ds1307->rtc);
>>
>> - if (ds1307_can_wakeup_device && !want_irq) {
>> - dev_info(ds1307->dev,
>> - "'wakeup-source' is set, request for an IRQ is disabled!\n");
>> - /* We cannot support UIE mode if we do not have an IRQ line */
>> - ds1307->rtc->uie_unsupported = 1;
>> - }
>> -
>> if (want_irq) {
>> err = devm_request_threaded_irq(ds1307->dev, client->irq, NULL,
>> chip->irq_handler ?: ds1307_irq,
>> @@ -1993,6 +1986,13 @@ static int ds1307_probe(struct i2c_client *client,
>> } else {
>> dev_dbg(ds1307->dev, "got IRQ %d\n", client->irq);
>> }
>> + } else {
>> + if (ds1307_can_wakeup_device)
>> + dev_info(ds1307->dev,
>> + "'wakeup-source' is set, request for an IRQ is disabled!\n");
>> +
>
> Honestly, just drop this message, it should have been removed by 82e2d43f6315
>
>
Done.
>> + /* We cannot support UIE mode if we do not have an IRQ line */
>> + ds1307->rtc->uie_unsupported = 1;
>> }
>>
>> ds1307->rtc->ops = chip->rtc_ops ?: &ds13xx_rtc_ops;
>> --
>> 2.26.2
>>
--
Łukasz Stelmach
Samsung R&D Institute Poland
Samsung Electronics
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 487 bytes --]
next prev parent reply other threads:[~2021-03-16 12:13 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20210308083541eucas1p1a8f772f12006ee6082b900c1a82aa298@eucas1p1.samsung.com>
2021-03-08 8:35 ` Łukasz Stelmach
[not found] ` <CGME20210316121218eucas1p1f74d6e6cec7fc897051902a7da478fd0@eucas1p1.samsung.com>
2021-03-16 12:12 ` Lukasz Stelmach [this message]
2021-03-16 12:32 ` Alexandre Belloni
[not found] ` <CGME20210316180430eucas1p1a3cb26f40772b0af75782ff84908d731@eucas1p1.samsung.com>
2021-03-16 18:04 ` Lukasz Stelmach
[not found] ` <CGME20210317081944eucas1p123bd27f3203c937d2969a66fb06d6d9e@eucas1p1.samsung.com>
2021-03-17 8:19 ` [PATCH 1/2] WIP: Introduce has_alarm method for rtc devices Łukasz Stelmach
[not found] ` <CGME20210317081947eucas1p15a31b346977fba94bf154716c3d89cb0@eucas1p1.samsung.com>
2021-03-17 8:19 ` [PATCH 2/2] WIP: Provide has_alarm method Łukasz Stelmach
2021-03-30 0:02 ` [PATCH] rtc: ds1307: set uie_unsupported if no interrupt is available Alexandre Belloni
2021-03-30 0:03 ` [PATCH 1/3] rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARM Alexandre Belloni
2021-03-30 0:03 ` [PATCH 2/3] rtc: ds1307: remove flags Alexandre Belloni
[not found] ` <CGME20210402102743eucas1p23690e0df642a10fa0326a84fac6c0ed3@eucas1p2.samsung.com>
2021-04-02 10:27 ` Łukasz Stelmach
2021-03-30 0:03 ` [PATCH 3/3] rtc: rtc_update_irq_enable: rework UIE emulation Alexandre Belloni
[not found] ` <CGME20210402102813eucas1p1bae7ec57559fa8df622118275bf6fae0@eucas1p1.samsung.com>
2021-04-02 10:28 ` Łukasz Stelmach
[not found] ` <CGME20210402102655eucas1p24ee7e879816089921bf9752c3c483122@eucas1p2.samsung.com>
2021-04-02 10:26 ` [PATCH 1/3] rtc: ds1307: replace HAS_ALARM by RTC_FEATURE_ALARM Łukasz Stelmach
[not found] ` <CGME20210330065217eucas1p2c50a100bf0101e72dd753f37257f6a57@eucas1p2.samsung.com>
2021-03-30 6:52 ` [PATCH] rtc: ds1307: set uie_unsupported if no interrupt is available Lukasz Stelmach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=dleftj1rcfe1rb.fsf%l.stelmach@samsung.com \
--to=l.stelmach@samsung.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=b.zolnierkie@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®