Re: drivers/gpu/drm/omapdrm/dss/dsi.c:1126:1: warning: the frame size of 1060 bytes is larger than 1024 bytes

["Arnd Bergmann" <arnd@arndb.de>]

On Fri, Sep 16, 2022, at 10:24 AM, Tomi Valkeinen wrote:
> On 15/09/2022 21:49, Arnd Bergmann wrote:
>> On Thu, Sep 15, 2022, at 8:17 PM, kernel test robot wrote:
>> I think hte problem is that struct dsi_irq_stats is just too
>> large, at 776 bytes. The interrupts are disabled during a copy
>> from 'dsi->irq_stats' into 'stats'. A trivial workaround would
>> avoid the local copy and keep interrupts disabled through
>> the entire function so it can operate directly on the source
>> data, but that would introduce a longer time with irqs disabled,
>> which might be bad as well.
>> 
>> Since this is only called from a debugfs file, and reading that
>> file is probably not performance critical itself, maybe
>> using kmalloc on the large structure would be best.
>
> I think that makes sense. I have sent a patch using kmalloc.
>
> Oddly enough, I was not able to reproduce the warning with my normal 
> toolchain, gcc-arm-11.2-2022.02-x86_64-arm-none-linux-gnueabihf. I even 
> reduced the frame size limit to 700, and saw warnings from other places, 
> but not from omapdrm.

I had another look and found that this only happens with
CONFIG_INIT_STACK_ALL_PATTERN=y or CONFIG_INIT_STACK_ALL_ZERO=y,
which are only available with gcc-12.x or clang.

It looks like without that, gcc can reduce the size of the
on-stack variable by only copying the members that it actually
needs, see https://pastebin.com/8dDRE1bX for the gcc-11
output.

      Arnd