Re: [PATCH] platform/x86: asus-armoury: add support for G614PR

[Denis Benato <denis.benato@linux.dev>]

On 6/10/26 17:21, Marco Scardovi wrote:
> Add TDP power limits and fan curve requirements for the ASUS ROG Strix
> G16 G614PR laptop model.
>
> The ASUS ROG Strix G16 G614PR requires specific AC/DC power limits
> (PPT PL1/PL2/PL3, dynamic boost, and NV TGP targets) to function
> correctly under various power profiles. Without these limits, the Asus
> Armoury driver cannot configure the correct power envelopes or enable custom
> fan curves, leading to suboptimal performance or noise management.
>
> This patch adds the corresponding DMI board name matching entry ("G614PR")
> under the power_limits table in asus-armoury.h, populating the AC and DC
> limits based on the platform's hardware specification.
Reviewed-by: Denis Benato <denis.benato@linux.dev>
> Assisted-by: Antigravity:gemini-3.5-flash
> Signed-off-by: Marco Scardovi <scardracs@disroot.org>
> ---
>  drivers/platform/x86/asus-armoury.h | 34 +++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
>
> diff --git a/drivers/platform/x86/asus-armoury.h b/drivers/platform/x86/asus-armoury.h
> index 692978b61959..5be34b6a92db 100644
> --- a/drivers/platform/x86/asus-armoury.h
> +++ b/drivers/platform/x86/asus-armoury.h
> @@ -1898,6 +1898,40 @@ static const struct dmi_system_id power_limits[] = {
>  			.requires_fan_curve = true,
>  		},
>  	},
> +	{
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_NAME, "G614PR"),
> +		},
> +		.driver_data = &(struct power_data) {
> +			.ac_data = &(struct power_limits) {
> +				.ppt_pl1_spl_min = 30,
> +				.ppt_pl1_spl_max = 90,
> +				.ppt_pl2_sppt_min = 65,
> +				.ppt_pl2_sppt_def = 110,
> +				.ppt_pl2_sppt_max = 125,
> +				.ppt_pl3_fppt_min = 65,
> +				.ppt_pl3_fppt_def = 110,
> +				.ppt_pl3_fppt_max = 125,
> +				.nv_temp_target_min = 75,
> +				.nv_temp_target_max = 87,
> +				.nv_dynamic_boost_min = 5,
> +				.nv_dynamic_boost_max = 25,
> +				.nv_tgp_min = 65,
> +				.nv_tgp_max = 115,
> +			},
> +			.dc_data = &(struct power_limits) {
> +				.ppt_pl1_spl_min = 25,
> +				.ppt_pl1_spl_max = 65,
> +				.ppt_pl2_sppt_min = 25,
> +				.ppt_pl2_sppt_max = 65,
> +				.ppt_pl3_fppt_min = 35,
> +				.ppt_pl3_fppt_max = 75,
> +				.nv_temp_target_min = 75,
> +				.nv_temp_target_max = 87,
> +			},
> +			.requires_fan_curve = true,
> +		},
> +	},
>  	{
>  		.matches = {
>  			DMI_MATCH(DMI_BOARD_NAME, "G615LR"),