mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Jingbo Xu <jefflexu@linux.alibaba.com>
To: Hou Tao <houtao@huaweicloud.com>, linux-cachefs@redhat.com
Cc: David Howells <dhowells@redhat.com>,
	linux-erofs@lists.ozlabs.org, Jeff Layton <jlayton@kernel.org>,
	linux-kernel@vger.kernel.org, houtao1@huawei.com
Subject: Re: [PATCH] fscache: Use wake_up_var() to wake up pending volume acquisition
Date: Mon, 28 Nov 2022 15:56:35 +0800	[thread overview]
Message-ID: <e1069bfc-be19-df66-dfeb-8a7aac0a9b97@linux.alibaba.com> (raw)
In-Reply-To: <20221128031929.3918348-1-houtao@huaweicloud.com>

Hi,

Thanks for catching this.


On 11/28/22 11:19 AM, Hou Tao wrote:
> From: Hou Tao <houtao1@huawei.com>
> 
> The freeing of relinquished volume will wake up the pending volume
> acquisition by using wake_up_bit(), however it is mismatched with
> wait_var_event() used in fscache_wait_on_volume_collision() and it will
> never wake up the waiter in the wait-queue because these two functions
> operate on different wait-queues.
> 
> According to the implementation in fscache_wait_on_volume_collision(),
> if the wake-up of pending acquisition is delayed longer than 20 seconds
> (e.g., due to the delay of on-demand fd closing), the first
> wait_var_event_timeout() will timeout and the following wait_var_event()
> will hang forever as shown below:
> 
>  FS-Cache: Potential volume collision new=00000024 old=00000022
>  ......
>  INFO: task mount:1148 blocked for more than 122 seconds.
>        Not tainted 6.1.0-rc6+ #1
>  task:mount           state:D stack:0     pid:1148  ppid:1
>  Call Trace:
>   <TASK>
>   __schedule+0x2f6/0xb80
>   schedule+0x67/0xe0
>   fscache_wait_on_volume_collision.cold+0x80/0x82
>   __fscache_acquire_volume+0x40d/0x4e0
>   erofs_fscache_register_volume+0x51/0xe0 [erofs]
>   erofs_fscache_register_fs+0x19c/0x240 [erofs]
>   erofs_fc_fill_super+0x746/0xaf0 [erofs]
>   vfs_get_super+0x7d/0x100
>   get_tree_nodev+0x16/0x20
>   erofs_fc_get_tree+0x20/0x30 [erofs]
>   vfs_get_tree+0x24/0xb0
>   path_mount+0x2fa/0xa90
>   do_mount+0x7c/0xa0
>   __x64_sys_mount+0x8b/0xe0
>   do_syscall_64+0x30/0x60
>   entry_SYSCALL_64_after_hwframe+0x46/0xb0
> 
> Fixing it by using wake_up_var() instead of wake_up_bit(). In addition
> because waitqueue_active() is used in wake_up_var() and clear_bit()
> doesn't imply any memory barrier, so do smp_mb__after_atomic() before
> invoking wake_up_var().
> 
> Fixes: 62ab63352350 ("fscache: Implement volume registration")
> Signed-off-by: Hou Tao <houtao1@huawei.com>

Reviewed-and-tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>


> ---
>  fs/fscache/volume.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/fs/fscache/volume.c b/fs/fscache/volume.c
> index ab8ceddf9efa..cf8293bb1aca 100644
> --- a/fs/fscache/volume.c
> +++ b/fs/fscache/volume.c
> @@ -348,7 +348,12 @@ static void fscache_wake_pending_volume(struct fscache_volume *volume,
>  		if (fscache_volume_same(cursor, volume)) {
>  			fscache_see_volume(cursor, fscache_volume_see_hash_wake);
>  			clear_bit(FSCACHE_VOLUME_ACQUIRE_PENDING, &cursor->flags);
> -			wake_up_bit(&cursor->flags, FSCACHE_VOLUME_ACQUIRE_PENDING);
> +			/*
> +			 * Paired with barrier in wait_var_event(). Check
> +			 * waitqueue_active() and wake_up_var() for details.
> +			 */
> +			smp_mb__after_atomic();
> +			wake_up_var(&cursor->flags);
>  			return;
>  		}
>  	}

-- 
Thanks,
Jingbo

  reply	other threads:[~2022-11-28  7:56 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-28  3:19 Hou Tao
2022-11-28  7:56 ` Jingbo Xu [this message]
2022-12-09 11:17 ` Hou Tao
2022-12-09 11:26 ` David Howells
2022-12-15  8:28   ` Hou Tao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1069bfc-be19-df66-dfeb-8a7aac0a9b97@linux.alibaba.com \
    --to=jefflexu@linux.alibaba.com \
    --cc=dhowells@redhat.com \
    --cc=houtao1@huawei.com \
    --cc=houtao@huaweicloud.com \
    --cc=jlayton@kernel.org \
    --cc=linux-cachefs@redhat.com \
    --cc=linux-erofs@lists.ozlabs.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®