Re: [PATCH 1/1] i2c: qcom-geni: add 32MHz I2C SE clock support for IPQ5424

[Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>]

Hi Manikanta,

On 9/24/2024 12:20 PM, Manikanta Mylavarapu wrote:
> The IPQ5424 I2C SE clock operates at a frequency of 32MHz. Since the
would it be better to say , I2C SE is sourced from 32MHZ ?
> existing map table is based on 19.2MHz, this patch incorporate the
based on 19.2MHz. this patch /,/.
> clock map table to derive the SCL clock from the 32MHz SE clock.
from the 32MHz Source Clock frequency.
SE = Expand OR  (I2C Serial Engine Controller)
> 
> Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
> ---
>   drivers/i2c/busses/i2c-qcom-geni.c | 11 +++++++++++
>   1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 212336f724a6..bbd9ecf09f4b 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -71,6 +71,7 @@ enum geni_i2c_err_code {
>   
>   #define I2C_AUTO_SUSPEND_DELAY	250
>   #define KHZ(freq)		(1000 * freq)
> +#define MHZ(freq)		(1000000 * freq)
>   #define PACKING_BYTES_PW	4
>   
>   #define ABORT_TIMEOUT		HZ
> @@ -152,11 +153,21 @@ static const struct geni_i2c_clk_fld geni_i2c_clk_map[] = {
A thought - Should we rename this appending _19.2M ? In future one or 
more may come as it evolves speed.
>   	{KHZ(1000), 1, 3,  9, 18},
>   };
>   
> +/* source_clock = 32 MHz */
> +static const struct geni_i2c_clk_fld geni_i2c_clk_map_32M[] = {
> +	{KHZ(100), 7, 14, 18, 40},
> +	{KHZ(400), 4,  3, 11, 20},
> +	{KHZ(1000), 4, 3,  6, 15},
> +};
> +
>   static int geni_i2c_clk_map_idx(struct geni_i2c_dev *gi2c)
>   {
>   	int i;
>   	const struct geni_i2c_clk_fld *itr = geni_i2c_clk_map;
>   
> +	if (clk_get_rate(gi2c->se.clk) == MHZ(32))
> +		itr = geni_i2c_clk_map_32M;
> +
>   	for (i = 0; i < ARRAY_SIZE(geni_i2c_clk_map); i++, itr++) {
>   		if (itr->clk_freq_out == gi2c->clk_freq_out) {
>   			gi2c->clk_fld = itr;