mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: Axel Lin <axel.lin@ingics.com>, Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>, <linux-kernel@vger.kernel.org>
Subject: Re: [RFT][PATCH 2/2] regulator: lm363x: Fix n_voltages setting for lm36274
Date: Wed, 26 Jun 2019 10:06:49 -0500	[thread overview]
Message-ID: <e1ba816f-1ecc-acc1-1f69-bc474da1061a@ti.com> (raw)
In-Reply-To: <20190626132632.32629-2-axel.lin@ingics.com>

Hello

On 6/26/19 8:26 AM, Axel Lin wrote:
> According to the datasheet http://www.ti.com/lit/ds/symlink/lm36274.pdf:
> Table 23. VPOS Bias Register Field Descriptions VPOS[5:0]:
> VPOS voltage (50-mV steps): VPOS = 4 V + (Code × 50 mV), 6.5 V max
> 000000 = 4 V
> 000001 = 4.05 V
> :
> 011110 = 5.5 V (Default)
> :
> 110010 = 6.5 V
> 110011 to 111111 map to 6.5 V
>
> So the LM36274_LDO_VSEL_MAX should be 0b110010 (0x32).
> The valid selectors are 0 ... LM36274_LDO_VSEL_MAX, n_voltages should be
> LM36274_LDO_VSEL_MAX + 1. Similarly, the n_voltages should be
> LM36274_BOOST_VSEL_MAX + 1 for LM36274_BOOST.
>
> Fixes: bff5e8071533 ("regulator: lm363x: Add support for LM36274")
> Signed-off-by: Axel Lin <axel.lin@ingics.com>
> ---
>   drivers/regulator/lm363x-regulator.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
> index e4a27d63bf90..4b9f618b07e9 100644
> --- a/drivers/regulator/lm363x-regulator.c
> +++ b/drivers/regulator/lm363x-regulator.c
> @@ -36,7 +36,7 @@
>   
>   /* LM36274 */
>   #define LM36274_BOOST_VSEL_MAX		0x3f
> -#define LM36274_LDO_VSEL_MAX		0x34
> +#define LM36274_LDO_VSEL_MAX		0x32

This does not seem correct the max number of voltages are 0x34.

The register is zero based so you can have 33 voltage select levels and 
+ 1 is 34 total selectors

Liam/Mark correct me if I am incorrect.

Dan


>   #define LM36274_VOLTAGE_MIN		4000000
>   
>   /* Common */
> @@ -226,7 +226,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
>   		.of_match	= "vboost",
>   		.id             = LM36274_BOOST,
>   		.ops            = &lm363x_boost_voltage_table_ops,
> -		.n_voltages     = LM36274_BOOST_VSEL_MAX,
> +		.n_voltages     = LM36274_BOOST_VSEL_MAX + 1,
>   		.min_uV         = LM36274_VOLTAGE_MIN,
>   		.uV_step        = LM363X_STEP_50mV,
>   		.type           = REGULATOR_VOLTAGE,
> @@ -239,7 +239,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
>   		.of_match	= "vpos",
>   		.id             = LM36274_LDO_POS,
>   		.ops            = &lm363x_regulator_voltage_table_ops,
> -		.n_voltages     = LM36274_LDO_VSEL_MAX,
> +		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
>   		.min_uV         = LM36274_VOLTAGE_MIN,
>   		.uV_step        = LM363X_STEP_50mV,
>   		.type           = REGULATOR_VOLTAGE,
> @@ -254,7 +254,7 @@ static const struct regulator_desc lm363x_regulator_desc[] = {
>   		.of_match	= "vneg",
>   		.id             = LM36274_LDO_NEG,
>   		.ops            = &lm363x_regulator_voltage_table_ops,
> -		.n_voltages     = LM36274_LDO_VSEL_MAX,
> +		.n_voltages     = LM36274_LDO_VSEL_MAX + 1,
>   		.min_uV         = LM36274_VOLTAGE_MIN,
>   		.uV_step        = LM363X_STEP_50mV,
>   		.type           = REGULATOR_VOLTAGE,

  reply	other threads:[~2019-06-26 15:07 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-26 13:26 [RFT][PATCH 1/2] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg Axel Lin
2019-06-26 13:26 ` [RFT][PATCH 2/2] regulator: lm363x: Fix n_voltages setting for lm36274 Axel Lin
2019-06-26 15:06   ` Dan Murphy [this message]
2019-06-26 15:20     ` Axel Lin
2019-06-26 17:07       ` Dan Murphy
2019-06-26 23:58         ` Axel Lin
2019-07-08  2:04           ` Axel Lin
2019-07-22 12:22   ` Applied "regulator: lm363x: Fix n_voltages setting for lm36274" to the regulator tree Mark Brown
2019-06-26 15:06 ` [RFT][PATCH 1/2] regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg Dan Murphy
2019-06-26 15:12   ` Axel Lin
2019-07-08  2:02     ` Axel Lin
2019-07-16 18:08       ` Dan Murphy
2019-07-22 12:22 ` Applied "regulator: lm363x: Fix off-by-one n_voltages for lm3632 ldo_vpos/ldo_vneg" to the regulator tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1ba816f-1ecc-acc1-1f69-bc474da1061a@ti.com \
    --to=dmurphy@ti.com \
    --cc=axel.lin@ingics.com \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®