Re: [PATCH v3 3/7] dt-bindings: phy: qcom,sm8150-csi2-phy: Add SM8150 CSI2 PHY

[Bryan O'Donoghue <bod@kernel.org>]

On 06/11/2026 18:35, Andrew Gigena via B4 Relay wrote:
> +  vdda-phy-supply:
> +    description: Phandle to a 0.88V regulator supply to a PHY.
> +
> +  vdda-pll-supply:
> +    description: Phandle to a 1.2V regulator supply to a PHY PLL.

Wrong names.

> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/$defs/port-base
> +        unevaluatedProperties: false
> +        description:
> +          Sensor input. A single sensor is described by a single endpoint with
> +          one to four data lanes, numbered 1-4. The clock lane is position 0.
> +
> +        properties:
> +          endpoint:
> +            $ref: /schemas/media/video-interfaces.yaml#
> +            unevaluatedProperties: false
> +
> +            properties:
> +              bus-type:
> +                enum:
> +                  - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +                default: 4
> +
> +              data-lanes:
> +                minItems: 1
> +                maxItems: 4
> +                items:
> +                  minimum: 1
> +                  maximum: 4
> +
> +            required:
> +              - data-lanes
> +              - remote-endpoint
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Output to the CAMSS CSI input port.

missing split-mode base case definition.

---
bod