mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Marijn Suijten <marijn.suijten@somainline.org>,
	phone-devel@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	AngeloGioacchino Del Regno 
	<angelogioacchino.delregno@somainline.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>,
	Martin Botka <martin.botka@somainline.org>,
	Jami Kettunen <jami.kettunen@somainline.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Clark <robdclark@gmail.com>,
	Sean Paul <sean@poorly.run>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>,
	Abhinav Kumar <abhinavk@codeaurora.org>,
	Jonathan Marek <jonathan@marek.ca>,
	Matthias Kaehlcke <mka@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
	freedreno@lists.freedesktop.org,
	Stephen Boyd <swboyd@chromium.org>
Subject: Re: [PATCH v3 1/2] drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent
Date: Wed, 15 Dec 2021 22:57:48 +0300	[thread overview]
Message-ID: <e1e7f91c-fcdb-7789-0094-80e2b5b09d4f@linaro.org> (raw)
In-Reply-To: <20210911131922.387964-2-marijn.suijten@somainline.org>

On 11/09/2021 16:19, Marijn Suijten wrote:
> All DSI PHY/PLL drivers were referencing their VCO parent clock by a
> global name, most of which don't exist or have been renamed.  These
> clock drivers seem to function fine without that except the 14nm driver
> for sdm6xx [1].
> 
> At the same time all DTs provide a "ref" clock as per the requirements
> of dsi-phy-common.yaml, but the clock is never used.  This patchset puts
> that clock to use without relying on a global clock name, so that all
> dependencies are explicitly defined in DT (the firmware) in the end.
> 
> Note that this patch intentionally breaks older firmware (DT) that
> relies on the clock to be found globally instead.  The only affected
> platform is msm8974 [2] for whose dsi_phy_28nm a .name="xo" fallback is
> left in place to accommodate a more graceful transition period.  All
> other platforms had the "ref" clock added to their phy node since its
> inception, or in a followup patch some time after.  These patches
> wrongly assumed that the "ref" clock was actively used and have hence
> been listed as "Fixes:" below.
> Furthermore apq8064 was providing the wrong 19.2MHz cxo instead of
> 27MHz pxo clock, which has been addressed in [3].
> 
> It is expected that both [2] and [3] are applied to the tree well in
> advance of this patch such that any actual breakage is extremely
> unlikely, but might still occur if kernel upgrades are performed without
> the DT to match.  After some time the fallback for msm8974 can be
> removed again as well.
> 
> [1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@somainline.org/
> [2]: https://lore.kernel.org/linux-arm-msm/20210830175739.143401-1-marijn.suijten@somainline.org/
> [3]: https://lore.kernel.org/linux-arm-msm/20210829203027.276143-2-marijn.suijten@somainline.org/
> 
> Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
> Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
> Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> ---
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      | 4 +++-
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      | 4 +++-
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      | 4 +++-
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++-
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 4 +++-
>   5 files changed, 15 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> index e46b10fc793a..3cbb1f1475e8 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> @@ -562,7 +562,9 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, struct clk_hw **prov
>   	char clk_name[32], parent[32], vco_name[32];
>   	char parent2[32], parent3[32], parent4[32];
>   	struct clk_init_data vco_init = {
> -		.parent_names = (const char *[]){ "xo" },
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "ref",
> +		},
>   		.num_parents = 1,
>   		.name = vco_name,
>   		.flags = CLK_IGNORE_UNUSED,
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> index ebedbb6c8961..789b08c24d25 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c
> @@ -802,7 +802,9 @@ static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm, struct clk_hw **prov
>   {
>   	char clk_name[32], parent[32], vco_name[32];
>   	struct clk_init_data vco_init = {
> -		.parent_names = (const char *[]){ "xo" },
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "ref",
> +		},
>   		.num_parents = 1,
>   		.name = vco_name,
>   		.flags = CLK_IGNORE_UNUSED,
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> index eb1b8ff61da1..531c4b65aede 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c
> @@ -521,7 +521,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>   {
>   	char clk_name[32], parent1[32], parent2[32], vco_name[32];
>   	struct clk_init_data vco_init = {
> -		.parent_names = (const char *[]){ "xo" },
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "ref", .name = "xo",
> +		},
>   		.num_parents = 1,
>   		.name = vco_name,
>   		.flags = CLK_IGNORE_UNUSED,
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> index aaa37456f4ee..9662cb236468 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c
> @@ -385,7 +385,9 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **prov
>   {
>   	char *clk_name, *parent_name, *vco_name;
>   	struct clk_init_data vco_init = {
> -		.parent_names = (const char *[]){ "pxo" },
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "ref",
> +		},
>   		.num_parents = 1,
>   		.flags = CLK_IGNORE_UNUSED,
>   		.ops = &clk_ops_dsi_pll_28nm_vco,
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index 9eade6d81a54..1a5abbd9fb76 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -588,7 +588,9 @@ static int pll_7nm_register(struct dsi_pll_7nm *pll_7nm, struct clk_hw **provide
>   	char clk_name[32], parent[32], vco_name[32];
>   	char parent2[32], parent3[32], parent4[32];
>   	struct clk_init_data vco_init = {
> -		.parent_names = (const char *[]){ "bi_tcxo" },
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "ref",
> +		},
>   		.num_parents = 1,
>   		.name = vco_name,
>   		.flags = CLK_IGNORE_UNUSED,
> --
> 2.33.0
> 


-- 
With best wishes
Dmitry

  reply	other threads:[~2021-12-15 19:58 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-11 13:19 [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL " Marijn Suijten
2021-09-11 13:19 ` [PATCH v3 1/2] drm/msm/dsi: Use "ref" fw clock instead of global name for " Marijn Suijten
2021-12-15 19:57   ` Dmitry Baryshkov [this message]
2021-09-11 13:19 ` [PATCH v3 2/2] clk: qcom: gcc-sdm660: Remove transient global "xo" clock Marijn Suijten
2021-09-14 21:44 ` [PATCH v3 0/2] Use "ref" clocks from firmware for DSI PLL VCO parent Stephen Boyd
2021-09-18 14:40   ` Marijn Suijten
2021-12-14 19:46     ` Marijn Suijten
2021-12-15 20:02       ` Dmitry Baryshkov
2021-12-16  0:43         ` Stephen Boyd
2021-12-21 16:22           ` Marijn Suijten

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e1e7f91c-fcdb-7789-0094-80e2b5b09d4f@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=abhinavk@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=airlied@linux.ie \
    --cc=angelogioacchino.delregno@somainline.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel@ffwll.ch \
    --cc=dianders@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=freedreno@lists.freedesktop.org \
    --cc=jami.kettunen@somainline.org \
    --cc=jonathan@marek.ca \
    --cc=konrad.dybcio@somainline.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marijn.suijten@somainline.org \
    --cc=martin.botka@somainline.org \
    --cc=mka@chromium.org \
    --cc=mturquette@baylibre.com \
    --cc=phone-devel@vger.kernel.org \
    --cc=robdclark@gmail.com \
    --cc=sboyd@kernel.org \
    --cc=sean@poorly.run \
    --cc=swboyd@chromium.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®