From: Philipp Stanner <pstanner@redhat.com>
To: Stefano Garzarella <sgarzare@redhat.com>,
Philipp Stanner <phasta@kernel.org>
Cc: "Alvaro Karsz" <alvaro.karsz@solid-run.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
"Jason Wang" <jasowang@redhat.com>,
"Xuan Zhuo" <xuanzhuo@linux.alibaba.com>,
"Eugenio Pérez" <eperezma@redhat.com>,
virtualization@lists.linux.dev, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4] vdpa: solidrun: Replace deprecated PCI functions
Date: Mon, 20 Jan 2025 10:13:03 +0100 [thread overview]
Message-ID: <e28c7cb2437d2dee73447db2db1d80646803e63a.camel@redhat.com> (raw)
In-Reply-To: <enuhuc7tjc5ez33c23lgzyy2nhiy54lykshlk5xurl4r6ilnsd@qnhrvku4xpxa>
On Thu, 2024-12-19 at 10:51 +0100, Stefano Garzarella wrote:
> On Thu, Dec 19, 2024 at 10:44:29AM +0100, Philipp Stanner wrote:
> > From: Philipp Stanner <pstanner@redhat.com>
> >
> > The PCI functions
> >
> > pcim_iomap_regions()
> > pcim_iounmap_regions()
> > pcim_iomap_table()
> >
> > have been deprecated by the PCI subsystem.
> >
> > Replace these functions with their successors pcim_iomap_region()
> > and
> > pcim_iounmap_region().
> >
> > Signed-off-by: Philipp Stanner <pstanner@redhat.com>
> > ---
> > Changes in v4:
> > - snet_open_vf_bar(): use distinct temporary variable to ensure
> > snet->bar is never an ERR_PTR. (Stefano)
>
> Thanks for that!
>
> I don't have a device to test, but it LGTM:
>
> Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Hi all,
can someone please finally merge this?
Thanks,
Philipp
>
>
> >
> > Changes in v3:
> > - Move __iomem *io declaration into the loop. (Stefano)
> >
> > Changes in v2:
> > - Fix build warning because of dead variable.
> > - Make "bars_found" a boolean, since only true or false are
> > relevant.
> > ---
> > drivers/vdpa/solidrun/snet_main.c | 57 +++++++++++++++-------------
> > ---
> > 1 file changed, 28 insertions(+), 29 deletions(-)
> >
> > diff --git a/drivers/vdpa/solidrun/snet_main.c
> > b/drivers/vdpa/solidrun/snet_main.c
> > index c8b74980dbd1..55ec51c17ab3 100644
> > --- a/drivers/vdpa/solidrun/snet_main.c
> > +++ b/drivers/vdpa/solidrun/snet_main.c
> > @@ -556,58 +556,60 @@ static const struct vdpa_config_ops
> > snet_config_ops = {
> > static int psnet_open_pf_bar(struct pci_dev *pdev, struct psnet
> > *psnet)
> > {
> > char *name;
> > - int ret, i, mask = 0;
> > + unsigned short i;
> > + bool bars_found = false;
> > +
> > + name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "psnet[%s]-
> > bars", pci_name(pdev));
> > + if (!name)
> > + return -ENOMEM;
> > +
> > /* We don't know which BAR will be used to communicate..
> > * We will map every bar with len > 0.
> > *
> > * Later, we will discover the BAR and unmap all other
> > BARs.
> > */
> > for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> > - if (pci_resource_len(pdev, i))
> > - mask |= (1 << i);
> > + void __iomem *io;
> > +
> > + if (pci_resource_len(pdev, i) == 0)
> > + continue;
> > +
> > + io = pcim_iomap_region(pdev, i, name);
> > + if (IS_ERR(io)) {
> > + SNET_ERR(pdev, "Failed to request and map
> > PCI BARs\n");
> > + return PTR_ERR(io);
> > + }
> > +
> > + psnet->bars[i] = io;
> > + bars_found = true;
> > }
> >
> > /* No BAR can be used.. */
> > - if (!mask) {
> > + if (!bars_found) {
> > SNET_ERR(pdev, "Failed to find a PCI BAR\n");
> > return -ENODEV;
> > }
> >
> > - name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "psnet[%s]-
> > bars", pci_name(pdev));
> > - if (!name)
> > - return -ENOMEM;
> > -
> > - ret = pcim_iomap_regions(pdev, mask, name);
> > - if (ret) {
> > - SNET_ERR(pdev, "Failed to request and map PCI
> > BARs\n");
> > - return ret;
> > - }
> > -
> > - for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> > - if (mask & (1 << i))
> > - psnet->bars[i] =
> > pcim_iomap_table(pdev)[i];
> > - }
> > -
> > return 0;
> > }
> >
> > static int snet_open_vf_bar(struct pci_dev *pdev, struct snet
> > *snet)
> > {
> > char *name;
> > - int ret;
> > + void __iomem *io;
> >
> > name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "snet[%s]-
> > bars", pci_name(pdev));
> > if (!name)
> > return -ENOMEM;
> >
> > /* Request and map BAR */
> > - ret = pcim_iomap_regions(pdev, BIT(snet->psnet-
> > >cfg.vf_bar), name);
> > - if (ret) {
> > + io = pcim_iomap_region(pdev, snet->psnet->cfg.vf_bar,
> > name);
> > + if (IS_ERR(io)) {
> > SNET_ERR(pdev, "Failed to request and map PCI BAR
> > for a VF\n");
> > - return ret;
> > + return PTR_ERR(io);
> > }
> >
> > - snet->bar = pcim_iomap_table(pdev)[snet->psnet-
> > >cfg.vf_bar];
> > + snet->bar = io;
> >
> > return 0;
> > }
> > @@ -656,15 +658,12 @@ static int psnet_detect_bar(struct psnet
> > *psnet, u32 off)
> >
> > static void psnet_unmap_unused_bars(struct pci_dev *pdev, struct
> > psnet *psnet)
> > {
> > - int i, mask = 0;
> > + unsigned short i;
> >
> > for (i = 0; i < PCI_STD_NUM_BARS; i++) {
> > if (psnet->bars[i] && i != psnet->barno)
> > - mask |= (1 << i);
> > + pcim_iounmap_region(pdev, i);
> > }
> > -
> > - if (mask)
> > - pcim_iounmap_regions(pdev, mask);
> > }
> >
> > /* Read SNET config from PCI BAR */
> > --
> > 2.47.1
> >
> >
>
next prev parent reply other threads:[~2025-01-20 9:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-12-19 9:44 Philipp Stanner
2024-12-19 9:51 ` Stefano Garzarella
2025-01-20 9:13 ` Philipp Stanner [this message]
2025-01-20 11:21 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e28c7cb2437d2dee73447db2db1d80646803e63a.camel@redhat.com \
--to=pstanner@redhat.com \
--cc=alvaro.karsz@solid-run.com \
--cc=eperezma@redhat.com \
--cc=jasowang@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mst@redhat.com \
--cc=phasta@kernel.org \
--cc=sgarzare@redhat.com \
--cc=virtualization@lists.linux.dev \
--cc=xuanzhuo@linux.alibaba.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome