From: John Youn <johnyoun@synopsys.com>
To: John Youn <johnyoun@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>
Cc: Christian Lamparter <chunkeey@googlemail.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
John Youn <johnyoun@synopsys.com>
Subject: [PATCH v3] usb: dwc2: add amcc,dwc-otg support
Date: Tue, 15 Nov 2016 15:03:40 -0800 [thread overview]
Message-ID: <e2d277d12b82ea88e5092058e883f7cdecb5cec3.1479250846.git.johnyoun@synopsys.com> (raw)
From: Christian Lamparter <chunkeey@googlemail.com>
This patch adds support for the "amcc,usb-otg" device
which is found in the PowerPC Canyonlands' dts.
The device definition was added by:
commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands
board")
but without any driver support as the dwc2 driver wasn't available at
that time.
Note: The system can't use the generic "snps,dwc2" compatible
because of the special ahbcfg configuration. The default
GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
when the USB and SATA is used concurrently.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
---
Sorry, the previous one broke compilation. This fixes it.
Regards,
John
v3 [johnyoun]:
* Fixed compilation issue
v2 [johnyoun]:
* Removed params struct
* Minor commit message formatting
Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
drivers/usb/dwc2/params.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index ad8f7ff..6c7c2bce 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -12,6 +12,7 @@ Required properties:
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
+ - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
- snps,dwc2: A generic DWC2 USB controller with default parameters.
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 513556a..a786256 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -239,6 +239,7 @@ const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{ .compatible = "amlogic,meson8b-usb", .data = ¶ms_amlogic },
{ .compatible = "amlogic,meson-gxbb-usb", .data = ¶ms_amlogic },
+ { .compatible = "amcc,dwc-otg", .data = NULL },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
--
2.10.0
next reply other threads:[~2016-11-15 23:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-15 23:03 John Youn [this message]
2016-11-18 13:49 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e2d277d12b82ea88e5092058e883f7cdecb5cec3.1479250846.git.johnyoun@synopsys.com \
--to=johnyoun@synopsys.com \
--cc=chunkeey@googlemail.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®