[ 0.000000] Linux version 7.2.0-15268-g73e3f0710014 (harald@catnip) (gcc (GCC) 16.2.0, GNU ld (GNU Binutils for Debian) 2.47) #17 SMP PREEMPT Fri Aug 28 12:28:27 CEST 2026 [ 0.000000] Command line: BOOT_IMAGE=/@rootfs/boot/vmlinuz-7.2.0-15268-g73e3f0710014 root=UUID=77a5c0fd-10ad-4a81-8a60-9bc583cd0801 ro rootflags=subvol=@rootfs quiet [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] System RAM [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] System RAM [ 0.000000] BIOS-e820: [gap 0x00000000000a0000-0x00000000000fffff] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] System RAM [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] device reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] System RAM [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] device reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000b659efff] System RAM [ 0.000000] BIOS-e820: [mem 0x00000000b659f000-0x00000000b679efff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000b679f000-0x00000000b6a9efff] device reserved [ 0.000000] BIOS-e820: [mem 0x00000000b6a9f000-0x00000000b6b9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b6b9f000-0x00000000b6bfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b6bff000-0x00000000b6bfffff] System RAM [ 0.000000] BIOS-e820: [gap 0x00000000b6c00000-0x00000000f80f7fff] [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] device reserved [ 0.000000] BIOS-e820: [gap 0x00000000f80f9000-0x00000000fed1bfff] [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] device reserved [ 0.000000] BIOS-e820: [gap 0x00000000fed20000-0x00000000ffffffff] [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083e5fffff] System RAM [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] efi: EFI v2.0 by Lenovo [ 0.000000] efi: ACPI=0xb6bfe000 ACPI 2.0=0xb6bfe014 SMBIOS=0xb6a9e000 [ 0.000000] efi: Not removing mem64: MMIO range=[0xf80f8000-0xf80f8fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem65: MMIO range=[0xfed1c000-0xfed1ffff] (16KB) from e820 map [ 0.000000] DMI: SMBIOS 2.6 present. [ 0.000000] DMI: LENOVO 428449G/428449G, BIOS 8BET66WW (1.46 ) 06/14/2018 [ 0.000000] DMI: Memory slots populated: 4/4 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2292.705 MHz processor [ 0.000698] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved [ 0.000702] e820: remove [mem 0x000a0000-0x000fffff] System RAM [ 0.000710] last_pfn = 0x83e600 max_arch_pfn = 0x400000000 [ 0.000716] MTRR map: 7 entries (3 fixed + 4 variable; max 23), built from 10 variable MTRRs [ 0.000718] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001813] last_pfn = 0xb6c00 max_arch_pfn = 0x400000000 [ 0.002480] Secure boot disabled [ 0.002481] RAMDISK: [mem 0x3652d000-0x3728dfff] [ 0.002488] ACPI: Early table checksum verification disabled [ 0.002492] ACPI: RSDP 0x00000000B6BFE014 000024 (v02 LENOVO) [ 0.002498] ACPI: XSDT 0x00000000B6BFE120 0000AC (v01 LENOVO TP-8B 00001460 PTEC 00000002) [ 0.002504] ACPI: FACP 0x00000000B6BE8000 0000F4 (v04 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002510] ACPI: DSDT 0x00000000B6BEB000 00EA91 (v01 LENOVO TP-8B 00001460 INTL 20061109) [ 0.002513] ACPI: FACS 0x00000000B6B2D000 000040 [ 0.002516] ACPI: FACS 0x00000000B6B2D000 000040 [ 0.002519] ACPI: SLIC 0x00000000B6BFD000 000176 (v01 LENOVO TP-8B 00001460 PTEC 00000001) [ 0.002522] ACPI: SSDT 0x00000000B6BFC000 000249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109) [ 0.002525] ACPI: SSDT 0x00000000B6BFB000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109) [ 0.002529] ACPI: SSDT 0x00000000B6BFA000 000797 (v01 LENOVO SataAhci 00001000 INTL 20061109) [ 0.002532] ACPI: HPET 0x00000000B6BE7000 000038 (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002535] ACPI: APIC 0x00000000B6BE6000 000098 (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002538] ACPI: MCFG 0x00000000B6BE5000 00003C (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002542] ACPI: ECDT 0x00000000B6BE4000 000052 (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002545] ACPI: ASF! 0x00000000B6BEA000 0000A5 (v32 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002548] ACPI: TCPA 0x00000000B6BE3000 000032 (v02 PTL LENOVO 06040000 LNVO 00000001) [ 0.002552] ACPI: SSDT 0x00000000B6BE2000 000A95 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.002555] ACPI: SSDT 0x00000000B6BE1000 000996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.002558] ACPI: DMAR 0x00000000B6BE0000 0000E8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.002562] ACPI: UEFI 0x00000000B6BDF000 00003E (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002565] ACPI: UEFI 0x00000000B6BDE000 000042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.002568] ACPI: UEFI 0x00000000B6BDD000 000292 (v01 LENOVO TP-8B 00001460 PTL 00000002) [ 0.002571] ACPI: Reserving FACP table memory at [mem 0xb6be8000-0xb6be80f3] [ 0.002572] ACPI: Reserving DSDT table memory at [mem 0xb6beb000-0xb6bf9a90] [ 0.002573] ACPI: Reserving FACS table memory at [mem 0xb6b2d000-0xb6b2d03f] [ 0.002574] ACPI: Reserving FACS table memory at [mem 0xb6b2d000-0xb6b2d03f] [ 0.002575] ACPI: Reserving SLIC table memory at [mem 0xb6bfd000-0xb6bfd175] [ 0.002576] ACPI: Reserving SSDT table memory at [mem 0xb6bfc000-0xb6bfc248] [ 0.002577] ACPI: Reserving SSDT table memory at [mem 0xb6bfb000-0xb6bfb032] [ 0.002578] ACPI: Reserving SSDT table memory at [mem 0xb6bfa000-0xb6bfa796] [ 0.002579] ACPI: Reserving HPET table memory at [mem 0xb6be7000-0xb6be7037] [ 0.002580] ACPI: Reserving APIC table memory at [mem 0xb6be6000-0xb6be6097] [ 0.002581] ACPI: Reserving MCFG table memory at [mem 0xb6be5000-0xb6be503b] [ 0.002582] ACPI: Reserving ECDT table memory at [mem 0xb6be4000-0xb6be4051] [ 0.002583] ACPI: Reserving ASF! table memory at [mem 0xb6bea000-0xb6bea0a4] [ 0.002584] ACPI: Reserving TCPA table memory at [mem 0xb6be3000-0xb6be3031] [ 0.002585] ACPI: Reserving SSDT table memory at [mem 0xb6be2000-0xb6be2a94] [ 0.002586] ACPI: Reserving SSDT table memory at [mem 0xb6be1000-0xb6be1995] [ 0.002587] ACPI: Reserving DMAR table memory at [mem 0xb6be0000-0xb6be00e7] [ 0.002588] ACPI: Reserving UEFI table memory at [mem 0xb6bdf000-0xb6bdf03d] [ 0.002589] ACPI: Reserving UEFI table memory at [mem 0xb6bde000-0xb6bde041] [ 0.002590] ACPI: Reserving UEFI table memory at [mem 0xb6bdd000-0xb6bdd291] [ 0.002615] Reserving Intel graphics memory at [mem 0xb7a00000-0xbf9fffff] [ 0.002791] ACPI: PM-Timer IO Port: 0x408 [ 0.002799] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.002801] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.002811] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.002814] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.002816] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.002821] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.002822] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.002826] TSC deadline timer available [ 0.002829] CPU topo: Max. logical packages: 1 [ 0.002830] CPU topo: Max. logical nodes: 1 [ 0.002831] CPU topo: Num. nodes per package: 1 [ 0.002834] CPU topo: Max. logical dies: 1 [ 0.002835] CPU topo: Max. dies per package: 1 [ 0.002841] CPU topo: Max. threads per core: 2 [ 0.002842] CPU topo: Num. cores per package: 4 [ 0.002842] CPU topo: Num. threads per package: 8 [ 0.002843] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs [ 0.002858] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.002860] PM: hibernation: Registered nosave memory: [mem 0x00058000-0x00058fff] [ 0.002862] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.002864] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.002866] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.002867] PM: hibernation: Registered nosave memory: [mem 0xb659f000-0xb6bfefff] [ 0.002869] PM: hibernation: Registered nosave memory: [mem 0xb6c00000-0xffffffff] [ 0.002871] [gap 0xbfa00000-0xf80f7fff] available for PCI devices [ 0.002874] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.007865] Zone ranges: [ 0.007865] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.007868] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.007869] Normal [mem 0x0000000100000000-0x000000083e5fffff] [ 0.007871] Movable zone start for each node [ 0.007872] Early memory node ranges [ 0.007872] node 0: [mem 0x0000000000001000-0x0000000000057fff] [ 0.007874] node 0: [mem 0x0000000000059000-0x000000000009ffff] [ 0.007875] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.007876] node 0: [mem 0x0000000020200000-0x000000003fffffff] [ 0.007877] node 0: [mem 0x0000000040200000-0x00000000b659efff] [ 0.007877] node 0: [mem 0x00000000b6bff000-0x00000000b6bfffff] [ 0.007878] node 0: [mem 0x0000000100000000-0x000000083e5fffff] [ 0.007880] Initmem setup node 0 [mem 0x0000000000001000-0x000000083e5fffff] [ 0.008197] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008200] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.008241] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.010969] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.015940] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.015964] On node 0, zone DMA32: 1632 pages in unavailable ranges [ 0.016369] On node 0, zone Normal: 5120 pages in unavailable ranges [ 0.016437] On node 0, zone Normal: 6656 pages in unavailable ranges [ 0.016450] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.016785] percpu: Embedded 45 pages/cpu s146520 r8192 d29608 u262144 [ 0.016792] pcpu-alloc: s146520 r8192 d29608 u262144 alloc=1*2097152 [ 0.016795] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.016816] Kernel command line: BOOT_IMAGE=/@rootfs/boot/vmlinuz-7.2.0-15268-g73e3f0710014 root=UUID=77a5c0fd-10ad-4a81-8a60-9bc583cd0801 ro rootflags=subvol=@rootfs quiet [ 0.016857] printk: log buffer data + meta data: 131072 + 458752 = 589824 bytes [ 0.020690] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.022633] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.022788] software IO TLB: area num 8. [ 0.038430] Built 1 zonelists, mobility grouping on. Total pages: 8341310 [ 0.038445] mem auto-init: stack:all(zero), heap alloc:on, heap free:off [ 0.060934] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.061095] Kernel/User page tables isolation: enabled [ 0.061536] rcu: Hierarchical RCU implementation. [ 0.061538] Trampoline variant of Tasks RCU enabled. [ 0.061539] Tracing variant of Tasks RCU enabled. [ 0.061540] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.061554] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=8. [ 0.061561] NR_IRQS: 4352, nr_irqs: 488, preallocated irqs: 16 [ 0.061767] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.061806] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.061943] Console: colour dummy device 80x25 [ 0.061947] printk: legacy console [tty0] enabled [ 0.061982] ACPI: Core revision 20260408 [ 0.062579] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.062596] APIC: Switch to symmetric I/O mode setup [ 0.062599] DMAR: Host address width 36 [ 0.062601] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.062607] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.062610] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.062614] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.062616] DMAR: RMRR base: 0x000000b68d5000 end: 0x000000b68ebfff [ 0.062619] DMAR: RMRR base: 0x000000b7800000 end: 0x000000bf9fffff [ 0.062620] DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000b7800000-0x00000000bf9fffff], contact BIOS vendor for fixes [ 0.062625] DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000b7800000-0x00000000bf9fffff] BIOS vendor: LENOVO; Ver: 8BET66WW (1.46 ); Product Version: ThinkPad W520 [ 0.062630] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1 [ 0.062631] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.062633] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.063229] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.063231] x2apic enabled [ 0.063298] APIC: Switched APIC routing to: cluster x2apic [ 0.063742] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068596] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x210c4a03dde, max_idle_ns: 440795276515 ns [ 0.068604] Calibrating delay loop (skipped), value calculated using timer frequency.. 4585.41 BogoMIPS (lpj=2292705) [ 0.068636] CPU0: Thermal monitoring enabled (TM1) [ 0.068666] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.068668] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.068678] process: using mwait in idle threads [ 0.068680] mitigations: Enabled attack vectors: user_kernel, user_user, guest_host, guest_guest, SMT mitigations: auto [ 0.068686] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.068687] Spectre V2 : Mitigation: Retpolines [ 0.068689] Spectre V2 : User space: Mitigation: STIBP via prctl [ 0.068690] MDS: Mitigation: Clear CPU buffers [ 0.068691] VMSCAPE: Mitigation: IBPB before exit to userspace [ 0.068692] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.068693] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT [ 0.068695] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.068696] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.068703] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.068705] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.068706] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.068708] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.068710] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.073739] pid_max: default: 32768 minimum: 301 [ 0.075172] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.075206] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.075444] VFS: Finished mounting rootfs on nullfs [ 0.076703] smpboot: CPU0: Intel(R) Core(TM) i7-2820QM CPU @ 2.30GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.076989] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.077007] ... version: 3 [ 0.077009] ... bit width: 48 [ 0.077010] ... generic counters: 4 [ 0.077011] ... generic bitmap: 000000000000000f [ 0.077012] ... fixed-purpose counters: 3 [ 0.077013] ... fixed-purpose bitmap: 0000000000000007 [ 0.077014] ... value mask: 0000ffffffffffff [ 0.077016] ... max period: 00007fffffffffff [ 0.077017] ... global_ctrl mask: 000000070000000f [ 0.077266] signal: max sigframe size: 1776 [ 0.077284] Estimated ratio of average max frequency by base frequency (times 1024): 1380 [ 0.077334] rcu: Hierarchical SRCU implementation. [ 0.077336] rcu: Max phase no-delay instances is 400. [ 0.077403] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 0.077674] smp: Bringing up secondary CPUs ... [ 0.077822] smpboot: x86: Booting SMP configuration: [ 0.077824] .... node #0, CPUs: #2 #4 #6 #1 #3 #5 #7 [ 0.084727] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.084727] VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details. [ 0.087619] smp: Brought up 1 node, 8 CPUs [ 0.087619] smpboot: Total of 8 processors activated (36683.28 BogoMIPS) [ 0.142508] node 0 deferred pages initialised in 53ms [ 0.142508] Memory: 32612360K/33365240K available (11335K kernel code, 978K rwdata, 2276K rodata, 1244K init, 360K bss, 742640K reserved, 0K cma-reserved) [ 0.143700] devtmpfs: initialized [ 0.144028] ACPI: PM: Registering ACPI NVS region [mem 0x00058000-0x00058fff] (4096 bytes) [ 0.144028] ACPI: PM: Registering ACPI NVS region [mem 0xb6a9f000-0xb6b9efff] (1048576 bytes) [ 0.144028] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.144028] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear). [ 0.145655] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.145884] thermal_sys: Registered thermal governor 'step_wise' [ 0.145886] thermal_sys: Registered thermal governor 'user_space' [ 0.145897] cpuidle: using governor ladder [ 0.145897] cpuidle: using governor menu [ 0.149572] efi: Freeing EFI boot services memory: 66972K [ 0.149580] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.150068] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f] [ 0.150083] PCI: Using configuration type 1 for base access [ 0.150126] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.150151] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.156954] ACPI: Added _OSI(Module Device) [ 0.156956] ACPI: Added _OSI(Processor Device) [ 0.156958] ACPI: Added _OSI(Processor Aggregator Device) [ 0.164734] ACPI: 6 ACPI AML tables successfully acquired and loaded [ 0.165122] ACPI: EC: EC started [ 0.165124] ACPI: EC: interrupt blocked [ 0.165360] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.165362] ACPI: EC: Boot ECDT EC used to handle transactions [ 0.165633] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.173051] ACPI: \_SB_: platform _OSC: OS support mask [002e7eff] [ 0.173051] ACPI: Dynamic OEM Table Load: [ 0.173051] ACPI: SSDT 0xFFFF9DB480C4C000 0008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.174012] ACPI: Dynamic OEM Table Load: [ 0.174020] ACPI: SSDT 0xFFFF9DB480E59400 000303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.174466] ACPI: Dynamic OEM Table Load: [ 0.174472] ACPI: SSDT 0xFFFF9DB4800C3E00 000119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.175698] ACPI: Interpreter enabled [ 0.175718] ACPI: PM: (supports S0 S3 S4 S5) [ 0.175720] ACPI: Using IOAPIC for interrupt routing [ 0.175742] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.175744] PCI: Using E820 reservations for host bridge windows [ 0.175940] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.180235] ACPI: \_SB_.PCI0.LPC_.EC__.PUBS: New power resource [ 0.181545] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1) [ 0.182325] acpi LNXIOBAY:00: ACPI dock station (docks/bays count: 2) [ 0.184131] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.184204] ACPI: PCI: Interrupt link LNKB configured for IRQ 11 [ 0.184273] ACPI: PCI: Interrupt link LNKC configured for IRQ 7 [ 0.184342] ACPI: PCI: Interrupt link LNKD configured for IRQ 10 [ 0.184410] ACPI: PCI: Interrupt link LNKE configured for IRQ 7 [ 0.184466] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.184468] ACPI: PCI: Interrupt link LNKF disabled [ 0.184535] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.184613] ACPI: PCI: Interrupt link LNKH configured for IRQ 10 [ 0.184723] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.184729] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.184813] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability LTR] [ 0.184880] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability] [ 0.184883] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR] [ 0.184885] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER] [ 0.184887] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_SUPPORT) [ 0.184890] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf8000000-0xfbffffff] for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.185012] PCI host bridge to bus 0000:00 [ 0.185017] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.185020] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.185022] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.185024] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfebfffff window] [ 0.185026] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window] [ 0.185028] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.185044] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 conventional PCI endpoint [ 0.185133] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 conventional PCI endpoint [ 0.185151] pci 0000:00:02.0: BAR 0 [mem 0xe0000000-0xe03fffff 64bit] [ 0.185154] pci 0000:00:02.0: BAR 2 [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.185157] pci 0000:00:02.0: BAR 4 [io 0x5000-0x503f] [ 0.185167] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.185289] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 conventional PCI endpoint [ 0.185337] pci 0000:00:16.0: BAR 0 [mem 0xe2625000-0xe262500f 64bit] [ 0.185382] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.185465] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 conventional PCI endpoint [ 0.185505] pci 0000:00:19.0: BAR 0 [mem 0xe2600000-0xe261ffff] [ 0.185508] pci 0000:00:19.0: BAR 1 [mem 0xe262b000-0xe262bfff] [ 0.185512] pci 0000:00:19.0: BAR 2 [io 0x5080-0x509f] [ 0.185553] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.185648] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 conventional PCI endpoint [ 0.185694] pci 0000:00:1a.0: BAR 0 [mem 0xe262a000-0xe262a3ff] [ 0.185744] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.185848] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint [ 0.185888] pci 0000:00:1b.0: BAR 0 [mem 0xe2620000-0xe2623fff 64bit] [ 0.185945] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.186068] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 PCIe Root Port [ 0.186111] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.186239] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.186374] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 PCIe Root Port [ 0.186419] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.186430] pci 0000:00:1c.1: bridge window [mem 0xe2500000-0xe25fffff] [ 0.186550] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.186693] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 PCIe Root Port [ 0.186739] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.186746] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.186752] pci 0000:00:1c.3: bridge window [mem 0xe1d00000-0xe24fffff] [ 0.186769] pci 0000:00:1c.3: bridge window [mem 0xe0400000-0xe0bfffff 64bit pref] [ 0.186872] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.187007] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 PCIe Root Port [ 0.187053] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.187060] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.187065] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe1cfffff] [ 0.187083] pci 0000:00:1c.4: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] [ 0.187187] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.187329] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400 PCIe Root Port [ 0.187375] pci 0000:00:1c.6: PCI bridge to [bus 0e] [ 0.187385] pci 0000:00:1c.6: bridge window [mem 0xe1400000-0xe14fffff] [ 0.187503] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.187646] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 conventional PCI endpoint [ 0.187692] pci 0000:00:1d.0: BAR 0 [mem 0xe2629000-0xe26293ff] [ 0.187741] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.187847] pci 0000:00:1f.0: [8086:1c4f] type 00 class 0x060100 conventional PCI endpoint [ 0.188039] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 conventional PCI endpoint [ 0.188075] pci 0000:00:1f.2: BAR 0 [io 0x50a8-0x50af] [ 0.188079] pci 0000:00:1f.2: BAR 1 [io 0x50b4-0x50b7] [ 0.188082] pci 0000:00:1f.2: BAR 2 [io 0x50a0-0x50a7] [ 0.188085] pci 0000:00:1f.2: BAR 3 [io 0x50b0-0x50b3] [ 0.188089] pci 0000:00:1f.2: BAR 4 [io 0x5060-0x507f] [ 0.188092] pci 0000:00:1f.2: BAR 5 [mem 0xe2628000-0xe26287ff] [ 0.188131] pci 0000:00:1f.2: PME# supported from D3hot [ 0.188219] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 conventional PCI endpoint [ 0.188258] pci 0000:00:1f.3: BAR 0 [mem 0xe2624000-0xe26240ff 64bit] [ 0.188263] pci 0000:00:1f.3: BAR 4 [io 0xefa0-0xefbf] [ 0.188394] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.188652] pci 0000:03:00.0: [8086:4238] type 00 class 0x028000 PCIe Endpoint [ 0.189022] pci 0000:03:00.0: BAR 0 [mem 0xe2500000-0xe2501fff 64bit] [ 0.189541] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.190124] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.190203] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.190372] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz. [ 0.190376] pci 0000:0d:00.0: [1180:e822] type 00 class 0x088001 PCIe Endpoint [ 0.190474] pci 0000:0d:00.0: BAR 0 [mem 0xe1501000-0xe15010ff] [ 0.190627] pci 0000:0d:00.0: supports D1 D2 [ 0.190629] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.190905] pci 0000:0d:00.3: [1180:e832] type 00 class 0x0c0010 PCIe Endpoint [ 0.191003] pci 0000:0d:00.3: BAR 0 [mem 0xe1500000-0xe15007ff] [ 0.191047] pci 0000:0d:00.3: Enabling fixed DMA alias to 00.0 [ 0.191166] pci 0000:0d:00.3: supports D1 D2 [ 0.191168] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.191373] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.191531] pci 0000:0e:00.0: [1033:0194] type 00 class 0x0c0330 PCIe Endpoint [ 0.191600] pci 0000:0e:00.0: BAR 0 [mem 0xe1400000-0xe1401fff 64bit] [ 0.191730] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold [ 0.191935] pci 0000:00:1c.6: PCI bridge to [bus 0e] [ 0.191987] pci_bus 0000:00: on NUMA node 0 [ 0.195046] ACPI: EC: interrupt unblocked [ 0.195049] ACPI: EC: event unblocked [ 0.195052] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.195053] ACPI: EC: GPE=0x11 [ 0.195056] ACPI: \_SB_.PCI0.LPC_.EC__: Boot ECDT EC initialization complete [ 0.195058] ACPI: \_SB_.PCI0.LPC_.EC__: EC: Used to handle transactions and events [ 0.195111] iommu: Default domain type: Translated [ 0.195113] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.195611] efivars: Registered efivars operations [ 0.195792] PCI: Using ACPI for IRQ routing [ 0.197588] PCI: pci_cache_line_size set to 64 bytes [ 0.197828] e820: register RAM buffer resource [mem 0x00058000-0x0005ffff] [ 0.197831] e820: register RAM buffer resource [mem 0xb659f000-0xb7ffffff] [ 0.197833] e820: register RAM buffer resource [mem 0xb6c00000-0xb7ffffff] [ 0.197835] e820: register RAM buffer resource [mem 0x83e600000-0x83fffffff] [ 0.197876] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.197876] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.197876] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.197876] vgaarb: loaded [ 0.197876] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.197876] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.199633] clocksource: Switched to clocksource tsc-early [ 0.200398] acpi PNP0C01:00: Could not reserve [mem 0x00000000-0x0009ffff] [ 0.200403] acpi PNP0C01:00: Could not reserve [mem 0x000c0000-0x000c3fff] [ 0.200405] acpi PNP0C01:00: Could not reserve [mem 0x000c4000-0x000c7fff] [ 0.200408] acpi PNP0C01:00: Reserved [mem 0x000c8000-0x000cbfff] [ 0.200410] acpi PNP0C01:00: Reserved [mem 0x000cc000-0x000cffff] [ 0.200413] acpi PNP0C01:00: Reserved [mem 0x000d0000-0x000d3fff] [ 0.200415] acpi PNP0C01:00: Reserved [mem 0x000d4000-0x000d7fff] [ 0.200417] acpi PNP0C01:00: Reserved [mem 0x000d8000-0x000dbfff] [ 0.200419] acpi PNP0C01:00: Reserved [mem 0x000dc000-0x000dffff] [ 0.200421] acpi PNP0C01:00: Reserved [mem 0x000e0000-0x000e3fff] [ 0.200423] acpi PNP0C01:00: Reserved [mem 0x000e4000-0x000e7fff] [ 0.200426] acpi PNP0C01:00: Reserved [mem 0x000e8000-0x000ebfff] [ 0.200428] acpi PNP0C01:00: Reserved [mem 0x000ec000-0x000effff] [ 0.200430] acpi PNP0C01:00: Could not reserve [mem 0x000f0000-0x000fffff] [ 0.200431] acpi PNP0C01:00: Could not reserve [mem 0x00100000-0xbf9fffff] [ 0.200433] acpi PNP0C01:00: Could not reserve [mem 0xfec00000-0xfed3ffff] [ 0.200435] acpi PNP0C01:00: Could not reserve [mem 0xfed4c000-0xffffffff] [ 0.200475] acpi PNP0C02:00: Skipped [io 0x0010-0x001f] [ 0.200478] acpi PNP0C02:00: Skipped [io 0x0090-0x009f] [ 0.200479] acpi PNP0C02:00: Skipped [io 0x0024-0x0025] [ 0.200481] acpi PNP0C02:00: Skipped [io 0x0028-0x0029] [ 0.200482] acpi PNP0C02:00: Skipped [io 0x002c-0x002d] [ 0.200484] acpi PNP0C02:00: Skipped [io 0x0030-0x0031] [ 0.200486] acpi PNP0C02:00: Skipped [io 0x0034-0x0035] [ 0.200487] acpi PNP0C02:00: Skipped [io 0x0038-0x0039] [ 0.200489] acpi PNP0C02:00: Skipped [io 0x003c-0x003d] [ 0.200490] acpi PNP0C02:00: Skipped [io 0x00a4-0x00a5] [ 0.200492] acpi PNP0C02:00: Skipped [io 0x00a8-0x00a9] [ 0.200493] acpi PNP0C02:00: Skipped [io 0x00ac-0x00ad] [ 0.200495] acpi PNP0C02:00: Skipped [io 0x00b0-0x00b5] [ 0.200496] acpi PNP0C02:00: Skipped [io 0x00b8-0x00b9] [ 0.200498] acpi PNP0C02:00: Skipped [io 0x00bc-0x00bd] [ 0.200500] acpi PNP0C02:00: Skipped [io 0x0050-0x0053] [ 0.200501] acpi PNP0C02:00: Skipped [io 0x0072-0x0077] [ 0.200503] acpi PNP0C02:00: Reserved [io 0x0400-0x047f] [ 0.200505] acpi PNP0C02:00: Reserved [io 0x0500-0x057f] [ 0.200507] acpi PNP0C02:00: Reserved [io 0x0800-0x080f] [ 0.200508] acpi PNP0C02:00: Reserved [io 0x15e0-0x15ef] [ 0.200510] acpi PNP0C02:00: Reserved [io 0x1600-0x167f] [ 0.200512] acpi PNP0C02:00: Could not reserve [mem 0xf8000000-0xfbffffff] [ 0.200514] acpi PNP0C02:00: Could not reserve [mem 0x00000000-0x00000fff] [ 0.200517] acpi PNP0C02:00: Reserved [mem 0xfed1c000-0xfed1ffff] [ 0.200519] acpi PNP0C02:00: Reserved [mem 0xfed10000-0xfed13fff] [ 0.200522] acpi PNP0C02:00: Reserved [mem 0xfed18000-0xfed18fff] [ 0.200524] acpi PNP0C02:00: Reserved [mem 0xfed19000-0xfed19fff] [ 0.200526] acpi PNP0C02:00: Reserved [mem 0xfed45000-0xfed4bfff] [ 0.200541] pnp: PnP ACPI init [ 0.201342] pnp: PnP ACPI: found 3 devices [ 0.207507] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.207823] NET: Registered PF_INET protocol family [ 0.207975] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.213186] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) [ 0.213237] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.213365] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 0.213872] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.214241] TCP: Hash tables configured (established 262144 bind 65536) [ 0.214395] MPTCP token hash table entries: 32768 (order: 8, 786432 bytes, linear) [ 0.214625] UDP hash table entries: 16384 (order: 8, 1048576 bytes, linear) [ 0.214898] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.214906] NET: Registered PF_XDP protocol family [ 0.214916] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000 [ 0.214922] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.214925] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.214939] pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff]: assigned [ 0.214943] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref]: assigned [ 0.214947] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]: assigned [ 0.214950] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.214954] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.214962] pci 0000:00:1c.0: bridge window [mem 0xbfa00000-0xbfbfffff] [ 0.214967] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfdfffff 64bit pref] [ 0.214976] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.214984] pci 0000:00:1c.1: bridge window [mem 0xe2500000-0xe25fffff] [ 0.214996] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.214999] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] [ 0.215006] pci 0000:00:1c.3: bridge window [mem 0xe1d00000-0xe24fffff] [ 0.215012] pci 0000:00:1c.3: bridge window [mem 0xe0400000-0xe0bfffff 64bit pref] [ 0.215021] pci 0000:00:1c.4: PCI bridge to [bus 0d] [ 0.215025] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff] [ 0.215032] pci 0000:00:1c.4: bridge window [mem 0xe1500000-0xe1cfffff] [ 0.215037] pci 0000:00:1c.4: bridge window [mem 0xe0c00000-0xe13fffff 64bit pref] [ 0.215046] pci 0000:00:1c.6: PCI bridge to [bus 0e] [ 0.215053] pci 0000:00:1c.6: bridge window [mem 0xe1400000-0xe14fffff] [ 0.215066] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.215068] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.215070] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.215072] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfebfffff window] [ 0.215074] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window] [ 0.215076] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.215078] pci_bus 0000:02: resource 1 [mem 0xbfa00000-0xbfbfffff] [ 0.215080] pci_bus 0000:02: resource 2 [mem 0xbfc00000-0xbfdfffff 64bit pref] [ 0.215082] pci_bus 0000:03: resource 1 [mem 0xe2500000-0xe25fffff] [ 0.215084] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.215086] pci_bus 0000:05: resource 1 [mem 0xe1d00000-0xe24fffff] [ 0.215087] pci_bus 0000:05: resource 2 [mem 0xe0400000-0xe0bfffff 64bit pref] [ 0.215090] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff] [ 0.215091] pci_bus 0000:0d: resource 1 [mem 0xe1500000-0xe1cfffff] [ 0.215093] pci_bus 0000:0d: resource 2 [mem 0xe0c00000-0xe13fffff 64bit pref] [ 0.215095] pci_bus 0000:0e: resource 1 [mem 0xe1400000-0xe14fffff] [ 0.216120] PCI: CLS 64 bytes, default 64 [ 0.216155] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.216157] software IO TLB: mapped [mem 0x00000000ab9a0000-0x00000000af9a0000] (64MB) [ 0.216244] Unpacking initramfs... [ 0.216825] Initialise system trusted keyrings [ 0.216850] Key type blacklist registered [ 0.216915] workingset: timestamp_bits=46 (anon: 41) max_order=23 bucket_order=0 (anon: 0) [ 0.244542] Key type asymmetric registered [ 0.244549] Asymmetric key parser 'x509' registered [ 0.244618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.247639] ledtrig-cpu: registered to indicate activity on CPUs [ 0.247682] pcieport 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.252307] acpi LNXTHERM:00: registered as thermal_zone0 [ 0.252313] ACPI: thermal: Thermal Zone [THM0] (67 C) [ 0.256943] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.263224] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.263233] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.263347] mousedev: PS/2 mouse device common for all mice [ 0.263400] rtc_cmos PNP0B00:00: RTC can wake from S4 [ 0.263658] rtc_cmos PNP0B00:00: registered as rtc0 [ 0.263694] rtc_cmos PNP0B00:00: setting system clock to 2026-08-28T10:32:29 UTC (1787913149) [ 0.263726] rtc_cmos PNP0B00:00: alarms up to one month, y3k, 114 bytes nvram [ 0.264666] intel_pstate: Intel P-state driver initializing [ 0.264926] pstore: Using crash dump compression: deflate [ 0.264932] pstore: Registered efi_pstore as persistent store backend [ 0.265800] NET: Registered PF_INET6 protocol family [ 0.266145] Segment Routing with IPv6 [ 0.266156] In-situ OAM (IOAM) with IPv6 [ 0.266173] NET: Registered PF_PACKET protocol family [ 0.267513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.268813] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.269649] microcode: Current revision: 0x0000002f [ 0.269651] microcode: Updated early from: 0x0000002e [ 0.270642] IPI shorthand broadcast: enabled [ 0.271511] sched_clock: Marking stable (268831726, 1795402)->(289863811, -19236683) [ 0.271818] Loading compiled-in X.509 certificates [ 0.273716] Key type .fscrypt registered [ 0.273718] Key type fscrypt-provisioning registered [ 0.274822] clk: Disabling unused clocks [ 0.337221] Freeing initrd memory: 13700K [ 0.337631] Freeing unused kernel image (initmem) memory: 1244K [ 0.337698] Write protecting the kernel read-only data: 16384k [ 0.338191] Freeing unused kernel image (text/rodata gap) memory: 952K [ 0.338616] Freeing unused kernel image (rodata/data gap) memory: 1820K [ 0.380902] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.380904] x86/mm: Checking user space page tables [ 0.420323] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 0.420327] Run /init as init process [ 0.420328] with arguments: [ 0.420329] /init [ 0.420330] with environment: [ 0.420331] HOME=/ [ 0.420332] TERM=linux [ 0.619980] udevd[130]: starting version 3.2.14 [ 0.872627] random: crng init done [ 0.873792] udevd[131]: starting eudev-3.2.14 [ 0.879858] input: Lid Switch as /devices/platform/PNP0C0D:00/input/input2 [ 0.879884] ACPI: button: Lid Switch [LID] [ 0.879931] input: Sleep Button as /devices/platform/PNP0C0E:00/input/input3 [ 0.879949] ACPI: button: Sleep Button [SLPB] [ 0.879995] input: Power Button as /devices/platform/LNXPWRBN:00/input/input4 [ 0.880027] ACPI: button: Power Button [PWRF] [ 0.897965] ACPI: battery: Slot [BAT0] (battery present) [ 0.898843] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\_SB.PCI0.LPC.PMIO) (20260408/utaddress-204) [ 0.898853] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.898857] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20260408/utaddress-204) [ 0.898863] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.898865] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20260408/utaddress-204) [ 0.898869] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.898871] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057F (\_SB.PCI0.LPC.LPIO) (20260408/utaddress-204) [ 0.898873] ACPI: OSL: Resource conflict; ACPI support missing from driver? [ 0.898874] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 0.900631] SCSI subsystem initialized [ 0.902466] libata version 3.00 loaded. [ 0.903630] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.908754] ACPI: bus type drm_connector registered [ 0.909323] Non-volatile memory driver v1.3 [ 0.910720] thinkpad_acpi: ThinkPad ACPI Extras v0.26 [ 0.910723] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 0.910724] thinkpad_acpi: ThinkPad BIOS 8BET66WW (1.46 ), EC unknown [ 0.910725] thinkpad_acpi: Lenovo ThinkPad W520, model 428449G [ 0.911093] thinkpad_acpi: radio switch found; radios are enabled [ 0.911161] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver [ 0.911163] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... [ 0.914630] ahci 0000:00:1f.2: AHCI vers 0001.0300, 32 command slots, 6 Gbps, SATA mode [ 0.914635] ahci 0000:00:1f.2: 5/6 ports implemented (port mask 0x1f) [ 0.914637] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.921556] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked [ 0.922097] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one [ 0.923093] scsi host0: ahci [ 0.923248] scsi host1: ahci [ 0.923355] scsi host2: ahci [ 0.923461] scsi host3: ahci [ 0.923578] scsi host4: ahci [ 0.923731] scsi host5: ahci [ 0.923780] ata1: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628100 irq 24 lpm-pol 3 [ 0.923784] ata2: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628180 irq 24 lpm-pol 1 ext [ 0.923788] ata3: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628200 irq 24 lpm-pol 3 [ 0.923791] ata4: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628280 irq 24 lpm-pol 1 ext [ 0.923794] ata5: SATA max UDMA/133 abar m2048@0xe2628000 port 0xe2628300 irq 24 lpm-pol 1 ext [ 0.923796] ata6: DUMMY [ 0.927595] thinkpad_acpi: battery 1 registered (start 0, stop 100, behaviours: 0xb) [ 0.927617] ACPI: battery: new hook: ThinkPad Battery Extension [ 0.927691] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6 [ 1.238984] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.239499] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.239520] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.239852] ata1.00: ATA-10: SanDisk SSD PLUS 1000GB, UH4504RL, max UDMA/133 [ 1.239864] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32) [ 1.241572] ata1.00: Features: Dev-Sleep DIPM [ 1.246845] ata1.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.246869] ata1.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.247898] tsc: Refined TSC clocksource calibration: 2292.552 MHz [ 1.247926] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x210bb93cce0, max_idle_ns: 440795250903 ns [ 1.248212] clocksource: Switched to clocksource tsc [ 1.248869] ata1.00: configured for UDMA/133 [ 1.259650] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD PLUS 04RL PQ: 0 ANSI: 5 [ 1.574737] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.575070] ata2.00: Model 'Samsung SSD 860 QVO 1TB', rev 'RVQ01B6Q', applying quirks: noncqtrim zeroaftertrim noncqonati nolpmonati [ 1.576118] ata2.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.576137] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.576443] ata2.00: supports DRM functions and may not be fully accessible [ 1.576456] ata2.00: ATA-11: Samsung SSD 860 QVO 1TB, RVQ01B6Q, max UDMA/133 [ 1.577034] ata2.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.580743] ata2.00: Features: Trust Dev-Sleep DIPM NCQ-sndrcv [ 1.581947] ata2.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.581962] ata2.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.582247] ata2.00: supports DRM functions and may not be fully accessible [ 1.586170] ata2.00: configured for UDMA/133 [ 1.596756] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 [ 1.877370] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820] [ 1.910843] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.911675] ata3.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.911696] ata3.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.912156] ata3.00: supports DRM functions and may not be fully accessible [ 1.912171] ata3.00: ATA-11: KINGSTON SUV500MS480G, 003056RI, max UDMA/133 [ 1.912369] ata3.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.914971] ata3.00: Features: HIPM DIPM [ 1.915814] ata3.00: ACPI cmd f5/00:00:00:00:00:a0(SECURITY FREEZE LOCK) filtered out [ 1.915831] ata3.00: ACPI cmd ef/10:03:00:00:00:a0(SET FEATURES) filtered out [ 1.916202] ata3.00: supports DRM functions and may not be fully accessible [ 1.918306] ata3.00: configured for UDMA/133 [ 1.918835] scsi 2:0:0:0: Direct-Access ATA KINGSTON SUV500M 56RI PQ: 0 ANSI: 5 [ 1.984899] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b1/0xb40000/0xa0000/0x0, board id: 0, fw id: 578367 [ 1.984936] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 [ 2.052874] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 [ 2.238682] ata4: SATA link down (SStatus 0 SControl 300) [ 2.558637] ata5: SATA link down (SStatus 0 SControl 300) [ 2.578839] ata2.00: Enabling discard_zeroes_data [ 2.578853] sd 2:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB) [ 2.578860] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 2.578863] sd 1:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.578871] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.578878] sd 2:0:0:0: [sdb] Write Protect is off [ 2.578882] sd 1:0:0:0: [sdc] Write Protect is off [ 2.578882] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.578886] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.578892] sd 0:0:0:0: [sda] Write Protect is off [ 2.578896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.578907] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578913] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578955] sd 2:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes [ 2.578968] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 2.578979] sd 1:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 2.579408] ata2.00: Enabling discard_zeroes_data [ 2.591446] sdb: sdb1 sdb2 sdb3 sdb4 [ 2.591669] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.592874] sda: sda1 sda2 sda3 [ 2.593216] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.599684] sdc: sdc1 [ 2.599780] sd 1:0:0:0: [sdc] Attached SCSI disk [ 2.699378] raid6: using ssse3x2 recovery algorithm [ 2.702179] raid6: sse2x1 gen() 9683 MB/s [ 2.704194] raid6: sse2x2 gen() 13031 MB/s [ 2.706259] raid6: sse2x4 gen() 12704 MB/s [ 2.706415] raid6: using algorithm sse2x2 gen() 13031 MB/s [ 2.707996] raid6: .... xor() 8310 MB/s, rmw enabled [ 2.708643] xor: automatically using best checksumming function avx [ 2.722587] Btrfs loaded, zoned=no, fsverity=no [ 2.835875] PM: Image not found (code -22) [ 2.868759] BTRFS: device label ROOT devid 1 transid 93588 /dev/sda2 (8:2) scanned by mount (239) [ 2.869706] BTRFS info (device sda2): first mount of filesystem 77a5c0fd-10ad-4a81-8a60-9bc583cd0801 [ 2.869724] BTRFS info (device sda2): using crc32c checksum algorithm [ 2.934486] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 2.955431] BTRFS info (device sda2): enabling ssd optimizations [ 2.955447] BTRFS info (device sda2): turning on async discard [ 2.955452] BTRFS info (device sda2): enabling free space tree [ 3.270989] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7 [ 3.411907] udevd[435]: starting version 3.2.14 [ 3.632184] udevd[436]: starting eudev-3.2.14 [ 3.691946] ACPI: AC: AC Adapter [AC] (on-line) [ 3.696870] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.696924] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.696958] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 3.699887] iTCO_wdt iTCO_wdt.1.auto: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 3.699982] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0) [ 3.705724] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 3.708873] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.709962] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 3.710266] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 3.711728] e1000e: Intel(R) PRO/1000 Network Driver [ 3.711731] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.712171] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.714368] ACPI: bus type USB registered [ 3.714401] usbcore: registered new interface driver usbfs [ 3.714415] usbcore: registered new interface driver hub [ 3.714425] usbcore: registered new device driver usb [ 3.715901] i2c i2c-0: Successfully instantiated SPD at 0x50 [ 3.716185] i2c i2c-0: Successfully instantiated SPD at 0x51 [ 3.716476] i2c i2c-0: Successfully instantiated SPD at 0x52 [ 3.716759] i2c i2c-0: Successfully instantiated SPD at 0x53 [ 3.727934] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 3.753611] tpm_tis 00:02: 1.2 TPM (vendor-id 0x104A, device-id 0x0, rev-id 78) [ 3.753834] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.754365] ACPI: \: failed to evaluate _DSM 2c176672-0b22-294b-814f-75e4dd26b5fd rev:0 func:0 (0x1001) [ 3.754521] ACPI: \: failed to evaluate _DSM 2c176672-0b22-294b-814f-75e4dd26b5fd rev:0 func:0 (0x1001) [ 3.754764] iwlwifi 0000:03:00.0: Detected crf-id 0xa5a5a5a1, cnv-id 0xa5a5a5a1 wfpm id 0xa5a5a5a1 [ 3.754825] iwlwifi 0000:03:00.0: PCI dev 4238/1111, rev=0x74, rfid=0xd55555d5 [ 3.754830] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN [ 3.755046] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2 [ 3.755072] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2 [ 3.757489] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 3.757499] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 3.757513] ehci-pci 0000:00:1d.0: debug port 2 [ 3.761453] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe2629000 [ 3.767812] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 3.767847] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02 [ 3.767906] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.767910] usb usb1: Product: EHCI Host Controller [ 3.767912] usb usb1: Manufacturer: Linux 7.2.0-15268-g73e3f0710014 ehci_hcd [ 3.767914] usb usb1: SerialNumber: 0000:00:1d.0 [ 3.768218] hub 1-0:1.0: USB hub found [ 3.768228] hub 1-0:1.0: 3 ports detected [ 3.768416] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8) [ 3.768784] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 3.768965] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 3.768974] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 3.768991] ehci-pci 0000:00:1a.0: debug port 2 [ 3.772920] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe262a000 [ 3.774876] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 3.778874] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 3.778913] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02 [ 3.778959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.778962] usb usb2: Product: EHCI Host Controller [ 3.778965] usb usb2: Manufacturer: Linux 7.2.0-15268-g73e3f0710014 ehci_hcd [ 3.778967] usb usb2: SerialNumber: 0000:00:1a.0 [ 3.779968] hub 2-0:1.0: USB hub found [ 3.781573] hub 2-0:1.0: 3 ports detected [ 3.782313] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 6000-4.ucode op_mode iwldvm [ 3.782506] xhci_hcd 0000:0e:00.0: xHCI Host Controller [ 3.782515] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 3 [ 3.782638] xhci_hcd 0000:0e:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x0000000000000004 [ 3.783015] xhci_hcd 0000:0e:00.0: xHCI Host Controller [ 3.783021] xhci_hcd 0000:0e:00.0: new USB bus registered, assigned bus number 4 [ 3.783027] xhci_hcd 0000:0e:00.0: Host supports USB 3.0 SuperSpeed [ 3.786262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.02 [ 3.786311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.786315] usb usb3: Product: xHCI Host Controller [ 3.786317] usb usb3: Manufacturer: Linux 7.2.0-15268-g73e3f0710014 xhci-hcd [ 3.786319] usb usb3: SerialNumber: 0000:0e:00.0 [ 3.786486] hub 3-0:1.0: USB hub found [ 3.786505] hub 3-0:1.0: 2 ports detected [ 3.786674] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 3.786678] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.02 [ 3.786724] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.786727] usb usb4: Product: xHCI Host Controller [ 3.786729] usb usb4: Manufacturer: Linux 7.2.0-15268-g73e3f0710014 xhci-hcd [ 3.786731] usb usb4: SerialNumber: 0000:0e:00.0 [ 3.786938] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 3.786942] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 3.786944] RAPL PMU: hw unit of domain package 2^-16 Joules [ 3.786946] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 3.788868] hub 4-0:1.0: USB hub found [ 3.788888] hub 4-0:1.0: 2 ports detected [ 3.799775] udevd[457]: Unknown key identifier 'zoom' [ 3.815936] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.815943] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled [ 3.815946] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled [ 3.815949] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 3.851961] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 3.860500] at24 0-0050: 256 byte spd EEPROM, read-only [ 3.862586] at24 0-0051: 256 byte spd EEPROM, read-only [ 3.864985] at24 0-0052: 256 byte spd EEPROM, read-only [ 3.871689] at24 0-0053: 256 byte spd EEPROM, read-only [ 3.893815] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:69:c4:6d [ 3.893822] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.893859] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF [ 3.933200] i915 0000:00:02.0: [drm] Found sandybridge (device ID 0126) integrated display version 6.00 stepping N/A [ 3.933618] i915 0000:00:02.0: vgaarb: deactivate vga console [ 3.933932] intel_rapl_common: Found RAPL domain package [ 3.933936] intel_rapl_common: Found RAPL domain core [ 3.933938] intel_rapl_common: Found RAPL domain uncore [ 3.933948] intel_rapl_common: package-0:package:long_term locked by BIOS [ 3.933951] intel_rapl_common: package-0:package:short_term locked by BIOS [ 3.972630] i915 0000:00:02.0: vgaarb: VGA decodes changed: olddecodes=io+mem,decodes=io:owns=io+mem [ 3.986813] [drm] Initialized i915 1.6.0 for 0000:00:02.0 on minor 0 [ 3.990500] ACPI: video: Video Device [VID] (multi-head: yes rom: no post: no) [ 3.991410] input: Video Bus as /devices/pci0000:00/acpi.video_bus.0/input/input8 [ 4.008942] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 4.015840] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 4.084887] fbcon: i915drmfb (fb0) is primary device [ 4.134030] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 4.134280] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.134766] hub 1-1:1.0: USB hub found [ 4.134877] hub 1-1:1.0: 8 ports detected [ 5.141300] Console: switching to colour frame buffer device 240x67 [ 5.158054] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops 0xffffffffc1416660) [ 5.159877] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 5.160594] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.162077] hub 2-1:1.0: USB hub found [ 5.162352] hub 2-1:1.0: 6 ports detected [ 5.162679] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.173029] snd_hda_codec_conexant hdaudioC0D0: CX20590: BIOS auto-probing. [ 5.173473] snd_hda_codec_conexant hdaudioC0D0: CX20590: picked fixup for PCI SSID 17aa:21cf [ 5.173533] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20590: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker [ 5.173537] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 5.173539] snd_hda_codec_conexant hdaudioC0D0: hp_outs=2 (0x1c/0x19/0x0/0x0/0x0) [ 5.173542] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 5.173543] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 5.173544] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x23 [ 5.173546] snd_hda_codec_conexant hdaudioC0D0: Dock Mic=0x1a [ 5.173548] snd_hda_codec_conexant hdaudioC0D0: Mic=0x1b [ 5.201362] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 5.201433] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 5.201482] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 5.201558] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 5.201606] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 5.356086] Adding 16591868k swap on /dev/sda3. Priority:-1 extents:1 across:16591868k SS [ 5.369964] BTRFS info (device sda2 state M): use zlib compression, level 3 [ 5.448813] usb 2-1.1: new low-speed USB device number 3 using ehci-pci [ 5.535828] usb 2-1.1: New USB device found, idVendor=0765, idProduct=5001, bcdDevice= 0.01 [ 5.537702] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.589992] hid: raw HID events driver (C) Jiri Kosina [ 5.594607] usbcore: registered new interface driver usbhid [ 5.594612] usbhid: USB HID core driver [ 5.597738] hid-generic 0003:0765:5001.0001: hiddev96,hidraw0: USB HID v1.00 Device [HID 0765:5001] on usb-0000:00:1a.0-1.1/input0 [ 5.600606] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev [ 5.612331] usb 2-1.3: new full-speed USB device number 4 using ehci-pci [ 5.688081] usb 2-1.3: New USB device found, idVendor=147e, idProduct=2016, bcdDevice= 0.02 [ 5.689031] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.689036] usb 2-1.3: Product: Biometric Coprocessor [ 5.689039] usb 2-1.3: Manufacturer: UPEK [ 5.693581] loop: module loaded [ 5.749372] BTRFS: device label HOME devid 1 transid 79752 /dev/sdc1 (8:33) scanned by mount (1299) [ 5.749930] BTRFS info (device sdc1): first mount of filesystem 69ca5c4c-838e-4c90-89bc-a6ef40b211a3 [ 5.749936] BTRFS info (device sdc1): using crc32c checksum algorithm [ 5.751817] usb 2-1.4: new full-speed USB device number 5 using ehci-pci [ 5.757969] BTRFS info (device sdc1): enabling ssd optimizations [ 5.757986] BTRFS info (device sdc1): turning on async discard [ 5.757991] BTRFS info (device sdc1): enabling free space tree [ 5.757996] BTRFS info (device sdc1): use zlib compression, level 3 [ 5.842036] usb 2-1.4: New USB device found, idVendor=0a5c, idProduct=217f, bcdDevice= 7.48 [ 5.845683] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.845687] usb 2-1.4: Product: Broadcom Bluetooth Device [ 5.845689] usb 2-1.4: Manufacturer: Broadcom Corp [ 5.845691] usb 2-1.4: SerialNumber: CC52AFE32C86 [ 5.869087] Bluetooth: Core ver 2.22 [ 5.869117] NET: Registered PF_BLUETOOTH protocol family [ 5.869119] Bluetooth: HCI device and connection manager initialized [ 5.869123] Bluetooth: HCI socket layer initialized [ 5.869125] Bluetooth: L2CAP socket layer initialized [ 5.869128] Bluetooth: SCO socket layer initialized [ 5.891795] usbcore: registered new interface driver btusb [ 5.922762] usb 2-1.6: new high-speed USB device number 6 using ehci-pci [ 6.010420] usb 2-1.6: New USB device found, idVendor=04f2, idProduct=b217, bcdDevice= 8.54 [ 6.017782] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.017788] usb 2-1.6: Product: Integrated Camera [ 6.017789] usb 2-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 6.026356] mc: Linux media interface: v0.10 [ 6.031886] videodev: Linux video capture interface: v2.00 [ 6.040942] uvcvideo 2-1.6:1.0: Found UVC 1.00 device Integrated Camera (04f2:b217) [ 6.050005] usbcore: registered new interface driver uvcvideo [ 6.064683] RPC: Registered named UNIX socket transport module. [ 6.064687] RPC: Registered udp transport module. [ 6.064688] RPC: Registered tcp transport module. [ 6.064689] RPC: Registered tcp-with-tls transport module. [ 6.064690] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.070891] netfs: FS-Cache loaded [ 7.081187] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 7.081193] Bluetooth: BNEP filters: protocol multicast [ 7.081198] Bluetooth: BNEP socket layer initialized [ 7.082928] Bluetooth: MGMT ver 1.23 [ 7.657155] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 7.892786] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 8.008162] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 8.243225] iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1 [ 11.113905] e1000e 0000:00:19.0 eth0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 18.573632] clocksource: Watchdog remote CPU 3 read timed out [ 20.060763] warning: `birdtray' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 21.284892] Bluetooth: RFCOMM TTY layer initialized [ 21.284905] Bluetooth: RFCOMM socket layer initialized [ 21.284911] Bluetooth: RFCOMM ver 1.11 [ 23.933722] fuse: init (API version 7.46)