Re: [PATCH v2] power: supply: qcom_battmgr: Add multi-port USB-C power supply support

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 8/6/26 5:06 PM, Kamal Wadhwa wrote:
> Extend the qcom_battmgr driver to report up to MAX_USB_PORTS (3)
> USB-C power supply ports on the X1E80100 & Glymur platform, which
> exposes more than one charger port to firmware.
> 
> At firmware-enable time, query USB_NUM_PORTS over the existing
> BATTMGR_USB_PROPERTY_GET opcode to discover how many ports the
> firmware actually reports, and register the additional
> "qcom-battmgr-usb2"/"qcom-battmgr-usb3" power supplies only when the
> firmware confirms a second/third port. Each additional port is polled
> independently via new BATTMGR_USB2_PROPERTY_GET/SET (0xC0/0xC1) and
> BATTMGR_USB3_PROPERTY_GET/SET (0xC2/0xC3) opcodes so its properties
> are not aliased to the primary port's state.
> 
> X1E80100 ports report their USB-C adapter type on USB_ADAP_TYPE
> rather than the SM8350/SC8280XP USB_TYPE property, so add a dedicated
> x1e80100_usb_prop_map[] mapping POWER_SUPPLY_PROP_USB_TYPE to
> USB_ADAP_TYPE, and use it for all three X1E80100 USB ports.
> 
> Give the primary X1E80100 USB port its own update/get_property
> callback (qcom_battmgr_usb_x1e80100_update()/
> qcom_battmgr_usb_x1e80100_get_property()) instead of routing it
> through the SC8280XP battery-status update path, mirroring the
> pattern already used for the usb2/usb3 ports.
> 
> Also add the POWER_SUPPLY_PROP_CAPACITY entry to x1e80100_bat_props[].

This should be a (easily backportable) separate bugfix

Konrad