mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Gary R Hook <gary.hook@amd.com>
To: Robin Murphy <robin.murphy@arm.com>, iommu@lists.linux-foundation.org
Cc: linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 1/2] iommu - Enable debugfs exposure of IOMMU driver internals
Date: Fri, 11 May 2018 14:41:42 -0500	[thread overview]
Message-ID: <e4d15552-db3b-824d-42bb-51cdefa7ac5e@amd.com> (raw)
In-Reply-To: <474751d1-02ec-9e00-26c8-36988ad83092@arm.com>

On 05/11/2018 10:22 AM, Robin Murphy wrote:
> Hi Gary,
> 
> Just a few trivial nitpicks below, otherwise:
> 
> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
> 
> On 11/05/18 15:34, Gary R Hook wrote:
>> Provide base enablement for using debugfs to expose internal data of an
>> IOMMU driver. When called, create the /sys/kernel/debug/iommu directory.
>>
>> Emit a strong warning at boot time to indicate that this feature is
>> enabled.
>>
>> This function is called from iommu_init, and creates the initial DebugFS
>> directory. Drivers may then call iommu_debugfs_new_driver_dir() to
>> instantiate a device-specific directory to expose internal data.
>> It will return a pointer to the new dentry structure created in
>> /sys/kernel/debug/iommu, or NULL in the event of a failure.
>>
>> Since the IOMMU driver can not be removed from the running system, there
>> is no need for an "off" function.
>>
>> Signed-off-by: Gary R Hook <gary.hook@amd.com>
>> ---
>>   drivers/iommu/Kconfig         |   11 ++++++
>>   drivers/iommu/Makefile        |    1 +
>>   drivers/iommu/iommu-debugfs.c |   70 
>> +++++++++++++++++++++++++++++++++++++++++
>>   drivers/iommu/iommu.c         |    2 +
>>   include/linux/iommu.h         |   10 ++++++
>>   5 files changed, 94 insertions(+)
>>   create mode 100644 drivers/iommu/iommu-debugfs.c
>>
>> diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
>> index f3a21343e636..ff511fa8ca7d 100644
>> --- a/drivers/iommu/Kconfig
>> +++ b/drivers/iommu/Kconfig
>> @@ -60,6 +60,17 @@ config IOMMU_IO_PGTABLE_ARMV7S_SELFTEST
>>   endmenu
>> +config IOMMU_DEBUGFS
>> +    bool "Export IOMMU internals in DebugFS"
>> +    depends on DEBUG_FS
>> +    default n
> 
> bool implicitly defaults to n anyway, so you don't really need to say it.

Roger.

> 
>> +    help
>> +      Allows exposure of IOMMU device internals. This option enables
>> +      the use of debugfs by IOMMU drivers as required. Devices can,
>> +      at initialization time, cause the IOMMU code to create a top-level
>> +      debug/iommu directory, and then populate a subdirectory with
>> +      entries as required.
>> +
>>   config IOMMU_IOVA
>>       tristate
>> diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
>> index 1fb695854809..74cfbc392862 100644
>> --- a/drivers/iommu/Makefile
>> +++ b/drivers/iommu/Makefile
>> @@ -2,6 +2,7 @@
>>   obj-$(CONFIG_IOMMU_API) += iommu.o
>>   obj-$(CONFIG_IOMMU_API) += iommu-traces.o
>>   obj-$(CONFIG_IOMMU_API) += iommu-sysfs.o
>> +obj-$(CONFIG_IOMMU_DEBUGFS) += iommu-debugfs.o
>>   obj-$(CONFIG_IOMMU_DMA) += dma-iommu.o
>>   obj-$(CONFIG_IOMMU_IO_PGTABLE) += io-pgtable.o
>>   obj-$(CONFIG_IOMMU_IO_PGTABLE_ARMV7S) += io-pgtable-arm-v7s.o
>> diff --git a/drivers/iommu/iommu-debugfs.c 
>> b/drivers/iommu/iommu-debugfs.c
>> new file mode 100644
>> index 000000000000..9df3b44aef55
>> --- /dev/null
>> +++ b/drivers/iommu/iommu-debugfs.c
>> @@ -0,0 +1,70 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * IOMMU driver
> 
> "driver"? ;) I'd have thought something like "IOMMU debugfs core 
> infrastructure", but arguably it's self-evident enough that it doesn't 
> necessarily need describing at all.

Changed to your suggestion

> 
>> + *
>> + * Copyright (C) 2018 Advanced Micro Devices, Inc.
>> + *
>> + * Author: Gary R Hook <gary.hook@amd.com>
>> + */
>> +
>> +#include <linux/pci.h>
>> +#include <linux/iommu.h>
>> +#include <linux/debugfs.h>
>> +
>> +static struct dentry *iommu_debugfs_dir;
>> +
>> +/**
>> + * iommu_debugfs_setup - create the top-level iommu directory in debugfs
>> + *
>> + * Provide base enablement for using debugfs to expose internal data 
>> of an
>> + * IOMMU driver. When called, this function creates the
>> + * /sys/kernel/debug/iommu directory.
>> + *
>> + * Emit a strong warning at boot time to indicate that this feature is
>> + * enabled.
>> + *
>> + * This function is called from iommu_init; drivers may then call
>> + * iommu_debugfs_new_driver_dir() to instantiate a vendor-specific
>> + * directory to be used to expose internal data.
>> + */
>> +void iommu_debugfs_setup(void)
>> +{
>> +    if (!iommu_debugfs_dir) {
>> +        iommu_debugfs_dir = debugfs_create_dir("iommu", NULL);
>> +        if (iommu_debugfs_dir) {
>> +            pr_warn("\n");
>> +            
>> pr_warn("*************************************************************\n"); 
>>
>> +            pr_warn("**     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE 
>> NOTICE    **\n");
>> +            
>> pr_warn("**                                                         
>> **\n");
>> +            pr_warn("**  IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN 
>> THIS KERNEL  **\n");
>> +            
>> pr_warn("**                                                         
>> **\n");
>> +            pr_warn("** This means that this kernel is built to 
>> expose internal **\n");
>> +            pr_warn("** IOMMU data structures, which may compromise 
>> security on **\n");
>> +            pr_warn("** your 
>> system.                                            **\n");
>> +            
>> pr_warn("**                                                         
>> **\n");
>> +            pr_warn("** If you see this message and you are not 
>> debugging the   **\n");
>> +            pr_warn("** kernel, report this immediately to your 
>> vendor!         **\n");
>> +            
>> pr_warn("**                                                         
>> **\n");
>> +            pr_warn("**     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE 
>> NOTICE    **\n");
>> +            
>> pr_warn("*************************************************************\n"); 
>>
>> +        }
>> +    }
>> +}
>> +
>> +/**
>> + * iommu_debugfs_new_driver_dir - create a vendor directory under 
>> debugfs/iommu
>> + * @vendor: name of the vendor-specific subdirectory to create
>> + *
>> + * This function is called by an IOMMU driver to create the top-level 
>> debugfs
>> + * directory for that driver. The return value is the dentry for the 
>> requested
>> + * vendor directory, or NULL in case of failure.
> 
> According to kernel-doc.rst, return values should be in a dedicated 
> section (i.e. "Return: The dentry...") rather than as part of the 
> function description.

A style change that happened along the way; my model was apparently 
older code. I've adjusted for this new style.

> 
>> + */
>> +struct dentry *iommu_debugfs_new_driver_dir(char *vendor)
> 
> const char *?

Sure thing.

> 
>> +{
>> +    struct dentry *d_new;
>> +
>> +    d_new = debugfs_create_dir(vendor, iommu_debugfs_dir);
>> +
>> +    return d_new;
>> +}
>> +EXPORT_SYMBOL_GPL(iommu_debugfs_new_driver_dir);
>> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
>> index d2aa23202bb9..350819f1c5e1 100644
>> --- a/drivers/iommu/iommu.c
>> +++ b/drivers/iommu/iommu.c
>> @@ -1747,6 +1747,8 @@ static int __init iommu_init(void)
>>                              NULL, kernel_kobj);
>>       BUG_ON(!iommu_group_kset);
>> +    iommu_debugfs_setup();
>> +
>>       return 0;
>>   }
>>   core_initcall(iommu_init);
>> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
>> index 19938ee6eb31..25018ac0fdab 100644
>> --- a/include/linux/iommu.h
>> +++ b/include/linux/iommu.h
>> @@ -698,4 +698,14 @@ const struct iommu_ops 
>> *iommu_ops_from_fwnode(struct fwnode_handle *fwnode)
>>   #endif /* CONFIG_IOMMU_API */
>> +#ifdef CONFIG_IOMMU_DEBUGFS
>> +void iommu_debugfs_setup(void);
>> +struct dentry *iommu_debugfs_new_driver_dir(char *vendor);
>> +#else
>> +static inline void iommu_debugfs_setup(void) {}
>> +static inline struct dentry *iommu_debugfs_new_driver_dir(char 
>> *vendor) { \
> 
> Since this is a function, not a macro, it doesn't really need the line 
> continuations.

Yep. Done. And moved the curly brace to the next line.

> 
> Robin.
> 
>> +    return NULL; \
>> +}
>> +#endif
>> +
>>   #endif /* __LINUX_IOMMU_H */
>>
>> _______________________________________________
>> iommu mailing list
>> iommu@lists.linux-foundation.org
>> https://lists.linuxfoundation.org/mailman/listinfo/iommu
>>

  reply	other threads:[~2018-05-11 19:41 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-11 14:34 [PATCH v6 0/2] Base enablement of IOMMU debugfs support Gary R Hook
2018-05-11 14:34 ` [PATCH v6 1/2] iommu - Enable debugfs exposure of IOMMU driver internals Gary R Hook
2018-05-11 15:22   ` Robin Murphy
2018-05-11 19:41     ` Gary R Hook [this message]
2018-05-11 14:34 ` [PATCH v6 2/2] iommu/amd: Add basic debugfs infrastructure for AMD IOMMU Gary R Hook

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e4d15552-db3b-824d-42bb-51cdefa7ac5e@amd.com \
    --to=gary.hook@amd.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robin.murphy@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®