mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Shravan Kumar Ramani <shravankr@nvidia.com>
To: Hans de Goede <hdegoede@redhat.com>,
	Mark Gross <markgross@kernel.org>,
	Vadim Pasternak <vadimp@nvidia.com>,
	David Thompson <davthompson@nvidia.com>
Cc: Shravan Kumar Ramani <shravankr@nvidia.com>,
	<platform-driver-x86@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v1 2/3] platform/mellanox: mlxbf-pmc: Fix reading of unprogrammed events
Date: Wed, 30 Aug 2023 07:12:33 -0400	[thread overview]
Message-ID: <e51a52445052ccb4af6ce3a7ac3c7ace733396c1.1693393544.git.shravankr@nvidia.com> (raw)
In-Reply-To: <cover.1693393544.git.shravankr@nvidia.com>

This fix involves 2 changes:
 - All event regs have a reset value of 0, which is not a valid
   event_number as per the event_list for most blocks and hence seen
   as an error. Add a "disable" event with event_number 0 for all blocks.

 - The enable bit for each counter need not be checked before
   reading the event info, and hence removed.

Fixes: 1a218d312e65 ("platform/mellanox: mlxbf-pmc: Add Mellanox BlueField PMC driver")
Signed-off-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
---
 drivers/platform/mellanox/mlxbf-pmc.c | 27 +++++++--------------------
 1 file changed, 7 insertions(+), 20 deletions(-)

diff --git a/drivers/platform/mellanox/mlxbf-pmc.c b/drivers/platform/mellanox/mlxbf-pmc.c
index 95afcae7b9fa..2d4bbe99959e 100644
--- a/drivers/platform/mellanox/mlxbf-pmc.c
+++ b/drivers/platform/mellanox/mlxbf-pmc.c
@@ -191,6 +191,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_smgen_events[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_1[] = {
+	{ 0x0, "DISABLE" },
 	{ 0xa0, "TPIO_DATA_BEAT" },
 	{ 0xa1, "TDMA_DATA_BEAT" },
 	{ 0xa2, "MAP_DATA_BEAT" },
@@ -214,6 +215,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_1[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_2[] = {
+	{ 0x0, "DISABLE" },
 	{ 0xa0, "TPIO_DATA_BEAT" },
 	{ 0xa1, "TDMA_DATA_BEAT" },
 	{ 0xa2, "MAP_DATA_BEAT" },
@@ -246,6 +248,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_trio_events_2[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_ecc_events[] = {
+	{ 0x0, "DISABLE" },
 	{ 0x100, "ECC_SINGLE_ERROR_CNT" },
 	{ 0x104, "ECC_DOUBLE_ERROR_CNT" },
 	{ 0x114, "SERR_INJ" },
@@ -258,6 +261,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_ecc_events[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_mss_events[] = {
+	{ 0x0, "DISABLE" },
 	{ 0xc0, "RXREQ_MSS" },
 	{ 0xc1, "RXDAT_MSS" },
 	{ 0xc2, "TXRSP_MSS" },
@@ -265,6 +269,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_mss_events[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_hnf_events[] = {
+	{ 0x0, "DISABLE" },
 	{ 0x45, "HNF_REQUESTS" },
 	{ 0x46, "HNF_REJECTS" },
 	{ 0x47, "ALL_BUSY" },
@@ -323,6 +328,7 @@ static const struct mlxbf_pmc_events mlxbf_pmc_hnf_events[] = {
 };
 
 static const struct mlxbf_pmc_events mlxbf_pmc_hnfnet_events[] = {
+	{ 0x0, "DISABLE" },
 	{ 0x12, "CDN_REQ" },
 	{ 0x13, "DDN_REQ" },
 	{ 0x14, "NDN_REQ" },
@@ -892,7 +898,7 @@ static int mlxbf_pmc_read_event(int blk_num, uint32_t cnt_num, bool is_l3,
 				uint64_t *result)
 {
 	uint32_t perfcfg_offset, perfval_offset;
-	uint64_t perfmon_cfg, perfevt, perfctl;
+	uint64_t perfmon_cfg, perfevt;
 
 	if (cnt_num >= pmc->block[blk_num].counters)
 		return -EINVAL;
@@ -904,25 +910,6 @@ static int mlxbf_pmc_read_event(int blk_num, uint32_t cnt_num, bool is_l3,
 	perfval_offset = perfcfg_offset +
 			 pmc->block[blk_num].counters * MLXBF_PMC_REG_SIZE;
 
-	/* Set counter in "read" mode */
-	perfmon_cfg = FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_ADDR,
-				 MLXBF_PMC_PERFCTL);
-	perfmon_cfg |= FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_STROBE, 1);
-	perfmon_cfg |= FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_WR_R_B, 0);
-
-	if (mlxbf_pmc_write(pmc->block[blk_num].mmio_base + perfcfg_offset,
-			    MLXBF_PMC_WRITE_REG_64, perfmon_cfg))
-		return -EFAULT;
-
-	/* Check if the counter is enabled */
-
-	if (mlxbf_pmc_read(pmc->block[blk_num].mmio_base + perfval_offset,
-			   MLXBF_PMC_READ_REG_64, &perfctl))
-		return -EFAULT;
-
-	if (!FIELD_GET(MLXBF_PMC_PERFCTL_EN0, perfctl))
-		return -EINVAL;
-
 	/* Set counter in "read" mode */
 	perfmon_cfg = FIELD_PREP(MLXBF_PMC_PERFMON_CONFIG_ADDR,
 				 MLXBF_PMC_PERFEVT);
-- 
2.30.1


  parent reply	other threads:[~2023-08-30 19:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-30 11:12 [PATCH v1 0/3] Updates to Mellanox PMC driver Shravan Kumar Ramani
2023-08-30 11:12 ` [PATCH v1 1/3] platform/mellanox: mlxbf-pmc: Fix potential buffer overflows Shravan Kumar Ramani
2023-08-30 11:12 ` Shravan Kumar Ramani [this message]
2023-08-30 11:12 ` [PATCH v1 3/3] platform/mellanox: mlxbf-pmc: Add support for BlueField-3 Shravan Kumar Ramani
2023-08-30 11:56   ` Vadim Pasternak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e51a52445052ccb4af6ce3a7ac3c7ace733396c1.1693393544.git.shravankr@nvidia.com \
    --to=shravankr@nvidia.com \
    --cc=davthompson@nvidia.com \
    --cc=hdegoede@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=markgross@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=vadimp@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®