From: Jim Lin <jilin@nvidia.com>
To: <gregkh@linuxfoundation.org>, <mathias.nyman@intel.com>,
<stern@rowland.harvard.edu>, <kai.heng.feng@canonical.com>,
<drinkcat@chromium.org>, <Thinh.Nguyen@synopsys.com>,
<nsaenzjulienne@suse.de>, <jflat@chromium.org>,
<malat@debian.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v11 1/2] usb: Add devaddr in struct usb_device
Date: Wed, 5 Jun 2019 17:48:02 +0800 [thread overview]
Message-ID: <e56146a9-9a88-b257-c3ea-1dcf307df830@nvidia.com> (raw)
In-Reply-To: <1559559224-9845-2-git-send-email-jilin@nvidia.com>
On 2019年06月03日 18:53, Jim Lin wrote:
> The Clear_TT_Buffer request sent to the hub includes the address of
> the LS/FS child device in wValue field. usb_hub_clear_tt_buffer()
> uses udev->devnum to set the address wValue. This won't work for
> devices connected to xHC.
>
> For other host controllers udev->devnum is the same as the address of
> the usb device, chosen and set by usb core. With xHC the controller
> hardware assigns the address, and won't be the same as devnum.
>
> Here we add devaddr in "struct usb_device" for
> usb_hub_clear_tt_buffer() to use.
>
> Signed-off-by: Jim Lin <jilin@nvidia.com>
> ---
> v2: xhci_clear_tt_buffer_complete: add static, shorter indentation
> , remove its claiming in xhci.h
> v3: Add description for clearing_tt (xhci.h)
> v4: Remove clearing_tt flag because hub_tt_work has hub->tt.lock
> to protect for Clear_TT_Buffer to be run serially.
> Remove xhci_clear_tt_buffer_complete as it's not necessary.
> Same reason as the above.
> Extend usb_hub_clear_tt_buffer parameter
> v5: Not extending usb_hub_clear_tt_buffer parameter
> Add description.
> v6: Remove unused parameter slot_id from xhci_clear_hub_tt_buffer
> v7: Add devaddr field in "struct usb_device"
> v8: split as two patches, change type from int to u8 for devaddr.
> v9: Use pahole to find place to put devaddr in struct usb_device.
> Remove space between type cast and variable.
> hub.c changed from v8
> clear->devinfo |= (u16) (udev->devaddr << 4);
> to
> clear->devinfo |= ((u16)udev->devaddr) << 4;
> to solve a problem if devaddr is larger than 16.
> v10 Initialize devaddr in xhci_setup_device()
> Move devaddr to be below "u8 level"
> v11 Add xhci.c "slot_ctx = ..."
>
> drivers/usb/core/hub.c | 4 +++-
> drivers/usb/host/xhci.c | 2 ++
> include/linux/usb.h | 2 ++
> 3 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 572e8c26a129..82cc3766cb23 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -873,7 +873,7 @@ int usb_hub_clear_tt_buffer(struct urb *urb)
> /* info that CLEAR_TT_BUFFER needs */
> clear->tt = tt->multi ? udev->ttport : 1;
> clear->devinfo = usb_pipeendpoint (pipe);
> - clear->devinfo |= udev->devnum << 4;
> + clear->devinfo |= ((u16)udev->devaddr) << 4;
> clear->devinfo |= usb_pipecontrol(pipe)
> ? (USB_ENDPOINT_XFER_CONTROL << 11)
> : (USB_ENDPOINT_XFER_BULK << 11);
> @@ -2125,6 +2125,8 @@ static void update_devnum(struct usb_device *udev, int devnum)
> /* The address for a WUSB device is managed by wusbcore. */
> if (!udev->wusb)
> udev->devnum = devnum;
> + if (!udev->devaddr)
> + udev->devaddr = (u8)devnum;
> }
>
> static void hub_free_dev(struct usb_device *udev)
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 20db378a6012..4f92643e3a4c 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4125,6 +4125,8 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
> /* Zero the input context control for later use */
> ctrl_ctx->add_flags = 0;
> ctrl_ctx->drop_flags = 0;
> + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
> + udev->devaddr = (u8)(le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK);
>
> xhci_dbg_trace(xhci, trace_xhci_dbg_address,
> "Internal device address = %d",
> diff --git a/include/linux/usb.h b/include/linux/usb.h
> index ae82d9d1112b..83d35d993e8c 100644
> --- a/include/linux/usb.h
> +++ b/include/linux/usb.h
> @@ -578,6 +578,7 @@ struct usb3_lpm_parameters {
> * @bus_mA: Current available from the bus
> * @portnum: parent port number (origin 1)
> * @level: number of USB hub ancestors
> + * @devaddr: device address, XHCI: assigned by HW, others: same as devnum
> * @can_submit: URBs may be submitted
> * @persist_enabled: USB_PERSIST enabled for this device
> * @have_langid: whether string_langid is valid
> @@ -661,6 +662,7 @@ struct usb_device {
> unsigned short bus_mA;
> u8 portnum;
> u8 level;
> + u8 devaddr;
>
> unsigned can_submit:1;
> unsigned persist_enabled:1;
- May I get patch v11 1/2 acked or reviewed by Alan?
Did I not do this already? Oh well, in any case:
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Alan Stern
--nvpublic
next prev parent reply other threads:[~2019-06-05 9:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-03 10:53 [PATCH v11 0/2] usb: xhci: Add Clear_TT_Buffer Jim Lin
2019-06-03 10:53 ` [PATCH v11 1/2] usb: Add devaddr in struct usb_device Jim Lin
2019-06-05 9:48 ` Jim Lin [this message]
2019-06-03 10:53 ` [PATCH v11 2/2] usb: xhci: Add Clear_TT_Buffer Jim Lin
2019-06-03 12:35 ` Mathias Nyman
2019-06-03 12:23 ` [PATCH v11 0/2] " Greg KH
2019-06-04 8:53 ` Jim Lin
2019-06-04 8:59 ` Greg KH
2019-06-04 14:22 ` Alan Stern
-- strict thread matches above, loose matches on Subject: below --
2019-05-29 14:55 Jim Lin
2019-05-29 14:55 ` [PATCH v11 1/2] usb: Add devaddr in struct usb_device Jim Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e56146a9-9a88-b257-c3ea-1dcf307df830@nvidia.com \
--to=jilin@nvidia.com \
--cc=Thinh.Nguyen@synopsys.com \
--cc=drinkcat@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=jflat@chromium.org \
--cc=kai.heng.feng@canonical.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=malat@debian.org \
--cc=mathias.nyman@intel.com \
--cc=nsaenzjulienne@suse.de \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®