Re: [PATCH net v3 1/1] net: macb: rate limit netdev error info print in the data path

[Jacob Keller <jacob.e.keller@intel.com>]

On 10/4/2026 6:39 AM, taozj888@163.com wrote:
> From: taozijin <taozj888@163.com>
> 
> Now the MACB ethernet driver print the netdev error information
> directly by netdev_err(), which would lead to a large number of
> error information print if there was a significant number of
> error or just jumbo packets exceeding the MTU received when booting.
> For example, it would print a large number of:
> 
> macb PHYT0036:00 eth0: not whole frame pointed by descriptor
> macb PHYT0036:00 eth0: not whole frame pointed by descriptor
> ...
> 
> in gem_rx() by having received a large number of packets without
> RX_EOF flag set, especially with unknown packet
> type that would penetrate the hardware offload for the IP packets.
> 
> The unlimited prints here would greatly bother and delay
> the system booting process unless the source stop sending
> packets since they occupy the console output bandwidth and
> other processes have to wait for the completion of printing those
> messages.
> 
> So rate limit the netdev error information print in the receive
> and transmit data path.
> 
> Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
> Cc: stable@vger.kernel.org
> Signed-off-by: Zijin Tao <taozj888@163.com>
> ---
>  drivers/net/ethernet/cadence/macb_main.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
> index 8e5c034dc3a4..ca60960bec36 100644
> --- a/drivers/net/ethernet/cadence/macb_main.c
> +++ b/drivers/net/ethernet/cadence/macb_main.c
> @@ -1617,16 +1617,16 @@ static int gem_rx(struct macb_queue *queue, struct napi_struct *napi,
>  		count++;
>  
>  		if (!(ctrl & MACB_BIT(RX_SOF) && ctrl & MACB_BIT(RX_EOF))) {
> -			netdev_err(bp->netdev,
> -				   "not whole frame pointed by descriptor\n");
> +			if (net_ratelimit())
> +				netdev_err(bp->netdev, "not whole frame pointed by descriptor\n");

I am surprised that there is no equivalent of netdev_err_ratelimited
like there is for dev_err_ratelimited.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>