Re: [rft, PATCH v4 00/16] drm/i915/dsi: 4th attempt to get rid of IOSF GPIO

[Hans de Goede <hdegoede@redhat.com>]

Hi,

On 11/3/23 21:18, Andy Shevchenko wrote:
> DSI code for VBT has a set of ugly GPIO hacks, one of which is direct
> talking to GPIO IP behind the actual driver's back. A second attempt
> to fix that is here.
> 
> If I understood correctly, my approach should work in the similar way as
> the current IOSF GPIO.
> 
> Hans, I believe you have some devices that use this piece of code,
> is it possible to give a test run on (one of) them?

Ok, this now has been testen on both a BYT and a CHT device which
actually use GPIO controls in their MIPI sequences so this
series is:

Tested-by: Hans de Goede <hdegoede@redhat.com>

And the code of the entire series also looks good to me:

Reviewed-by: Hans de Goede <hdegoede@redhat.com>

for the series.

Regards,

Hans




> In v4:
> - fixed compile time errors in patch 14 (Hans, LKP)
> - fixed cover letter Subject
> - added patch 15 (as suggested by Ville)
> - added Ack tag (Jani)
> 
> In v3:
> - incorporated series by Jani
> - incorporated couple of precursor patches by Hans
> - added Rb tag for used to be first three patches (Andi)
> - rebased on top of the above changes
> - fixed indexing for multi-community devices, such as Cherry View
> 
> In v2:
> - added a few cleanup patches
> - reworked to use dynamic GPIO lookup tables
> - converted CHV as well
> 
> Andy Shevchenko (9):
>   drm/i915/dsi: Replace while(1) with one with clear exit condition
>   drm/i915/dsi: Get rid of redundant 'else'
>   drm/i915/dsi: Replace check with a (missing) MIPI sequence name
>   drm/i915/dsi: Extract common soc_gpio_set_value() helper
>   drm/i915/dsi: Replace poking of VLV GPIOs behind the driver's back
>   drm/i915/dsi: Prepare soc_gpio_set_value() to distinguish GPIO
>     communities
>   drm/i915/dsi: Replace poking of CHV GPIOs behind the driver's back
>   drm/i915/dsi: Combine checks in mipi_exec_gpio()
>   drm/i915/iosf: Drop unused APIs
> 
> Hans de Goede (2):
>   drm/i915/dsi: Remove GPIO lookup table at the end of
>     intel_dsi_vbt_gpio_init()
>   drm/i915/dsi: Fix wrong initial value for GPIOs in
>     bxt_gpio_set_value()
> 
> Jani Nikula (5):
>   drm/i915/dsi: assume BXT gpio works for non-native GPIO
>   drm/i915/dsi: switch mipi_exec_gpio() from dev_priv to i915
>   drm/i915/dsi: clarify GPIO exec sequence
>   drm/i915/dsi: rename platform specific *_exec_gpio() to
>     *_gpio_set_value()
>   drm/i915/dsi: bxt/icl GPIO set value do not need gpio source
> 
>  drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 355 +++++++------------
>  drivers/gpu/drm/i915/vlv_sideband.c          |  17 -
>  drivers/gpu/drm/i915/vlv_sideband.h          |   3 -
>  3 files changed, 136 insertions(+), 239 deletions(-)
>