From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Herve Codina <herve.codina@bootlin.com>,
Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
Michael Ellerman <mpe@ellerman.id.au>,
Nicholas Piggin <npiggin@gmail.com>,
Qiang Zhao <qiang.zhao@nxp.com>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
Shengjiu Wang <shengjiu.wang@gmail.com>,
Xiubo Li <Xiubo.Lee@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
Nicolin Chen <nicoleotsuka@gmail.com>
Cc: "linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v6 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller
Date: Fri, 17 Feb 2023 16:27:30 +0000 [thread overview]
Message-ID: <e66a52b4-d8c0-34c6-efcd-1ff5bbd0edc5@csgroup.eu> (raw)
In-Reply-To: <20230217145645.1768659-2-herve.codina@bootlin.com>
Le 17/02/2023 à 15:56, Herve Codina a écrit :
> Add support for the time slot assigner (TSA)
> available in some PowerQUICC SoC such as MPC885
> or MPC866.
>
> Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
> ---
> .../bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml | 215 ++++++++++++++++++
> include/dt-bindings/soc/cpm1-fsl,tsa.h | 13 ++
> 2 files changed, 228 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml
> create mode 100644 include/dt-bindings/soc/cpm1-fsl,tsa.h
>
> diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml
> new file mode 100644
> index 000000000000..332e902bcc21
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml
> @@ -0,0 +1,215 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,cpm1-tsa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: PowerQUICC CPM Time-slot assigner (TSA) controller
> +
> +maintainers:
> + - Herve Codina <herve.codina@bootlin.com>
> +
> +description:
> + The TSA is the time-slot assigner that can be found on some PowerQUICC SoC.
> + Its purpose is to route some TDM time-slots to other internal serial
> + controllers.
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - fsl,mpc885-tsa
> + - fsl,mpc866-tsa
> + - const: fsl,cpm1-tsa
> +
> + reg:
> + items:
> + - description: SI (Serial Interface) register base
> + - description: SI RAM base
> +
> + reg-names:
> + items:
> + - const: si_regs
> + - const: si_ram
> +
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + '#fsl,serial-cells':
> + $ref: /schemas/types.yaml#/definitions/uint32
> + const: 1
> + description:
> + TSA consumers that use a phandle to TSA need to pass the serial identifier
> + with this phandle (defined in dt-bindings/soc/fsl,tsa.h).
> + For instance "fsl,tsa-serial = <&tsa FSL_CPM_TSA_SCC4>;".
> +
> +patternProperties:
> + '^tdm@[0-1]$':
> + description:
> + The TDM managed by this controller
> + type: object
> +
> + additionalProperties: false
> +
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1
> + description:
> + The TDM number for this TDM, 0 for TDMa and 1 for TDMb
> +
> + fsl,common-rxtx-pins:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + The hardware can use four dedicated pins for Tx clock, Tx sync, Rx
> + clock and Rx sync or use only two pins, Tx/Rx clock and Tx/Rx sync.
> + Without the 'fsl,common-rxtx-pins' property, the four pins are used.
> + With the 'fsl,common-rxtx-pins' property, two pins are used.
> +
> + clocks:
> + minItems: 2
> + items:
> + - description: External clock connected to L1RSYNC pin
> + - description: External clock connected to L1RCLK pin
> + - description: External clock connected to L1TSYNC pin
> + - description: External clock connected to L1TCLK pin
> +
> + clock-names:
> + minItems: 2
> + items:
> + - const: l1rsync
> + - const: l1rclk
> + - const: l1tsync
> + - const: l1tclk
> +
> + fsl,rx-frame-sync-delay-bits:
> + enum: [0, 1, 2, 3]
> + default: 0
> + description: |
> + Receive frame sync delay in number of bits.
> + Indicates the delay between the Rx sync and the first bit of the Rx
> + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> +
> + fsl,tx-frame-sync-delay-bits:
> + enum: [0, 1, 2, 3]
> + default: 0
> + description: |
> + Transmit frame sync delay in number of bits.
> + Indicates the delay between the Tx sync and the first bit of the Tx
> + frame. 0 for no bit delay. 1, 2 or 3 for 1, 2 or 3 bits delay.
> +
> + fsl,clock-falling-edge:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Data is sent on falling edge of the clock (and received on the rising
> + edge). If 'clock-falling-edge' is not present, data is sent on the
> + rising edge (and received on the falling edge).
> +
> + fsl,fsync-rising-edge:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + Frame sync pulses are sampled with the rising edge of the channel
> + clock. If 'fsync-rising-edge' is not present, pulses are sampled with
> + the falling edge.
> +
> + fsl,double-speed-clock:
> + $ref: /schemas/types.yaml#/definitions/flag
> + description:
> + The channel clock is twice the data rate.
> +
> + patternProperties:
> + '^fsl,[rt]x-ts-routes$':
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + description: |
> + A list of tuple that indicates the Tx or Rx time-slots routes.
> + items:
> + items:
> + - description:
> + The number of time-slots
> + minimum: 1
> + maximum: 64
> + - description: |
> + The source (Tx) or destination (Rx) serial interface
> + (dt-bindings/soc/cpm1-fsl,tsa.h defines these values)
> + - 0: No destination
> + - 1: SCC2
> + - 2: SCC3
> + - 3: SCC4
> + - 4: SMC1
> + - 5: SMC2
> + enum: [0, 1, 2, 3, 4, 5]
> + minItems: 1
> + maxItems: 64
> +
> + allOf:
> + # If fsl,common-rxtx-pins is present, only 2 clocks are needed.
> + # Else, the 4 clocks must be present.
> + - if:
> + required:
> + - fsl,common-rxtx-pins
> + then:
> + properties:
> + clocks:
> + maxItems: 2
> + clock-names:
> + maxItems: 2
> + else:
> + properties:
> + clocks:
> + minItems: 4
> + clock-names:
> + minItems: 4
> +
> + required:
> + - reg
> + - clocks
> + - clock-names
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - '#address-cells'
> + - '#size-cells'
> + - '#fsl,serial-cells'
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/soc/cpm1-fsl,tsa.h>
> +
> + tsa@ae0 {
> + compatible = "fsl,mpc885-tsa", "fsl,cpm1-tsa";
> + reg = <0xae0 0x10>,
> + <0xc00 0x200>;
> + reg-names = "si_regs", "si_ram";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> + #fsl,serial-cells = <1>;
> +
> + tdm@0 {
> + /* TDMa */
> + reg = <0>;
> +
> + clocks = <&clk_l1rsynca>, <&clk_l1rclka>;
> + clock-names = "l1rsync", "l1rclk";
> +
> + fsl,common-rxtx-pins;
> + fsl,fsync-rising-edge;
> +
> + fsl,tx-ts-routes = <2 0>, /* TS 0..1 */
> + <24 FSL_CPM_TSA_SCC4>, /* TS 2..25 */
> + <1 0>, /* TS 26 */
> + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */
> +
> + fsl,rx-ts-routes = <2 0>, /* TS 0..1 */
> + <24 FSL_CPM_TSA_SCC4>, /* 2..25 */
> + <1 0>, /* TS 26 */
> + <5 FSL_CPM_TSA_SCC3>; /* TS 27..31 */
> + };
> + };
> diff --git a/include/dt-bindings/soc/cpm1-fsl,tsa.h b/include/dt-bindings/soc/cpm1-fsl,tsa.h
> new file mode 100644
> index 000000000000..2cc44e867dbe
> --- /dev/null
> +++ b/include/dt-bindings/soc/cpm1-fsl,tsa.h
> @@ -0,0 +1,13 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +
> +#ifndef __DT_BINDINGS_SOC_FSL_TSA_H
> +#define __DT_BINDINGS_SOC_FSL_TSA_H
> +
> +#define FSL_CPM_TSA_NU 0 /* Pseuso Cell Id for not used item */
> +#define FSL_CPM_TSA_SCC2 1
> +#define FSL_CPM_TSA_SCC3 2
> +#define FSL_CPM_TSA_SCC4 3
> +#define FSL_CPM_TSA_SMC1 4
> +#define FSL_CPM_TSA_SMC2 5
> +
> +#endif
next prev parent reply other threads:[~2023-02-17 16:27 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-17 14:56 [PATCH v6 00/10] Add the PowerQUICC audio support using the QMC Herve Codina
2023-02-17 14:56 ` [PATCH v6 01/10] dt-bindings: soc: fsl: cpm_qe: Add TSA controller Herve Codina
2023-02-17 16:27 ` Christophe Leroy [this message]
2023-02-26 17:48 ` Rob Herring
2023-03-06 15:41 ` Herve Codina
2023-02-17 14:56 ` [PATCH v6 02/10] soc: fsl: cpm1: Add support for TSA Herve Codina
2023-02-17 16:26 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 03/10] MAINTAINERS: add the Freescale TSA controller entry Herve Codina
2023-02-17 16:27 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 04/10] powerpc/8xx: Use a larger CPM1 command check mask Herve Codina
2023-02-17 14:56 ` [PATCH v6 05/10] dt-bindings: soc: fsl: cpm_qe: Add QMC controller Herve Codina
2023-02-17 16:27 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 06/10] soc: fsl: cpm1: Add support for QMC Herve Codina
2023-02-17 16:28 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 07/10] MAINTAINERS: add the Freescale QMC controller entry Herve Codina
2023-02-17 16:28 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 08/10] dt-bindings: sound: Add support for QMC audio Herve Codina
2023-02-17 16:29 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 09/10] ASoC: fsl: " Herve Codina
2023-02-17 16:30 ` Christophe Leroy
2023-02-17 14:56 ` [PATCH v6 10/10] MAINTAINERS: add the Freescale QMC audio entry Herve Codina
2023-02-17 16:30 ` Christophe Leroy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e66a52b4-d8c0-34c6-efcd-1ff5bbd0edc5@csgroup.eu \
--to=christophe.leroy@csgroup.eu \
--cc=Xiubo.Lee@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=herve.codina@bootlin.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nicoleotsuka@gmail.com \
--cc=npiggin@gmail.com \
--cc=perex@perex.cz \
--cc=qiang.zhao@nxp.com \
--cc=robh+dt@kernel.org \
--cc=shengjiu.wang@gmail.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®