From: "Yousaf Jindal" <yousaf.jindal@pi.edu.pk>
To: thomas.winkler@intel.com, linux-kernel@vger.kernel.org
Subject: Re: [ANNOUNCE] Wifi Link 5300 and 5100 Series
Date: Fri, 15 Aug 2008 16:07:29 -0400 [thread overview]
Message-ID: <e700089d0808151307j27d6c61dw3a1dd174e4e8610c@mail.gmail.com> (raw)
> On 00:11 Thu 14 Aug , Tomas Winkler wrote:
>> Intel would like to announce Linux support for Wifi Link 5000 and
>> 5100 Series Adapters under iwlwifi driver (iwlagn.ko)
>>
> ...
>> The best known working driver can be located in iwl500 branch of
>> iwlwifi-2.6.git
>> git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6.git iwl5000
I am using the iwl500 branch from the above git repository and I am
also receiving the timeout error. This is on a Wifi Link 5100 on an
Asus M50VM laptop.
$ dmesg|grep iw
[ 8.574423] iwlagn: Intel(R) Wireless WiFi Link AGN driver for
Linux, 1.3.27kds
[ 8.574655] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 8.575055] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.575369] iwlagn 0000:03:00.0: setting latency timer to 64
[ 8.575425] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 8.607886] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 8.609136] iwlagn 0000:03:00.0: PCI INT A disabled
[ 8.608701] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 19.311948] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 19.312260] iwlagn 0000:03:00.0: restoring config space at offset
0x1 (was 0x100002, writing 0x100006)
[ 19.312442] firmware: requesting iwlwifi-5000-1.ucode
[ 23.459172] iwlagn: START_ALIVE timeout after 4000ms.
[ 23.459318] iwlagn 0000:03:00.0: PCI INT A disabled
-- Yousaf
--
Yousaf Jindal
Director of Technology
Pakistani Institute
next reply other threads:[~2008-08-15 20:07 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-15 20:07 Yousaf Jindal [this message]
2008-08-16 10:26 ` Yousaf Jindal
[not found] ` <1ba2fa240808180112l284086f4x64168d994743398@mail.gmail.com>
2008-08-18 10:15 ` Yousaf Jindal
2008-08-18 12:47 ` Tomas Winkler
2008-08-18 16:43 ` Yousaf Jindal
[not found] ` <1ba2fa240808181642h61fb2d74ja96dd3860fb5d4e6@mail.gmail.com>
2008-08-18 23:55 ` Yousaf Jindal
-- strict thread matches above, loose matches on Subject: below --
2008-08-13 21:11 Tomas Winkler
2008-08-14 6:26 ` Will Simoneau
2008-08-14 12:15 ` Tomas Winkler
2008-08-14 13:03 ` Tomas Winkler
2008-08-14 17:55 ` Will Simoneau
2008-08-14 18:09 ` Tomas Winkler
2008-08-14 19:13 ` Will Simoneau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e700089d0808151307j27d6c61dw3a1dd174e4e8610c@mail.gmail.com \
--to=yousaf.jindal@pi.edu.pk \
--cc=linux-kernel@vger.kernel.org \
--cc=thomas.winkler@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®