From: "Kazlauskas, Nicholas" <nicholas.kazlauskas@amd.com>
To: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>,
amd-gfx@lists.freedesktop.org, dri-devel@lists.freedesktop.org,
linux-kernel@vger.kernel.org
Cc: "Harry Wentland" <harry.wentland@amd.com>,
"Leo Li" <sunpeng.li@amd.com>,
"Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
hersenxs.wu@amd.com
Subject: Re: [PATCH v2 3/4] drm/amd/display: Add pipe_state tracepoint
Date: Fri, 11 Sep 2020 13:11:48 -0400 [thread overview]
Message-ID: <e70b5c24-ece8-c989-7058-890e51bc6ae1@amd.com> (raw)
In-Reply-To: <20200911145927.401322-4-Rodrigo.Siqueira@amd.com>
On 2020-09-11 10:59 a.m., Rodrigo Siqueira wrote:
> This commit introduces a trace mechanism for struct pipe_ctx by adding a
> middle layer struct in the amdgpu_dm_trace.h for capturing the most
> important data from struct pipe_ctx and showing its data via tracepoint.
> This tracepoint was added to dc.c and dcn10_hw_sequencer, however, it
> can be added to other DCN architecture.
>
> Co-developed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
This patch, while very useful, unfortunately pulls in a lot of DM code
into DC so I would prefer to hold off on this one for now.
It would be better if this had a proper DC interface for tracing/logging
these states. If the API was more like how we handle tracing register
reads/writes this would be cleaner.
Regards,
Nicholas Kazlauskas
> ---
> .../amd/display/amdgpu_dm/amdgpu_dm_trace.h | 172 ++++++++++++++++++
> drivers/gpu/drm/amd/display/dc/core/dc.c | 11 ++
> .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 17 +-
> 3 files changed, 195 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_trace.h b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_trace.h
> index 5fb4c4a5c349..53f62506e17c 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_trace.h
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_trace.h
> @@ -376,6 +376,178 @@ TRACE_EVENT(amdgpu_dm_atomic_check_finish,
> __entry->async_update, __entry->allow_modeset)
> );
>
> +#ifndef _AMDGPU_DM_TRACE_STRUCTS_DEFINED_
> +#define _AMDGPU_DM_TRACE_STRUCTS_DEFINED_
> +
> +struct amdgpu_dm_trace_pipe_state {
> + int pipe_idx;
> + const void *stream;
> + int stream_w;
> + int stream_h;
> + int dst_x;
> + int dst_y;
> + int dst_w;
> + int dst_h;
> + int src_x;
> + int src_y;
> + int src_w;
> + int src_h;
> + int clip_x;
> + int clip_y;
> + int clip_w;
> + int clip_h;
> + int recout_x;
> + int recout_y;
> + int recout_w;
> + int recout_h;
> + int viewport_x;
> + int viewport_y;
> + int viewport_w;
> + int viewport_h;
> + int flip_immediate;
> + int surface_pitch;
> + int format;
> + int swizzle;
> + unsigned int update_flags;
> +};
> +
> +#define fill_out_trace_pipe_state(trace_pipe_state, pipe_ctx) \
> + do { \
> + trace_pipe_state.pipe_idx = (pipe_ctx)->pipe_idx; \
> + trace_pipe_state.stream = (pipe_ctx)->stream; \
> + trace_pipe_state.stream_w = (pipe_ctx)->stream->timing.h_addressable; \
> + trace_pipe_state.stream_h = (pipe_ctx)->stream->timing.v_addressable; \
> + trace_pipe_state.dst_x = (pipe_ctx)->plane_state->dst_rect.x; \
> + trace_pipe_state.dst_y = (pipe_ctx)->plane_state->dst_rect.y; \
> + trace_pipe_state.dst_w = (pipe_ctx)->plane_state->dst_rect.width; \
> + trace_pipe_state.dst_h = (pipe_ctx)->plane_state->dst_rect.height; \
> + trace_pipe_state.src_x = (pipe_ctx)->plane_state->src_rect.x; \
> + trace_pipe_state.src_y = (pipe_ctx)->plane_state->src_rect.y; \
> + trace_pipe_state.src_w = (pipe_ctx)->plane_state->src_rect.width; \
> + trace_pipe_state.src_h = (pipe_ctx)->plane_state->src_rect.height; \
> + trace_pipe_state.clip_x = (pipe_ctx)->plane_state->clip_rect.x; \
> + trace_pipe_state.clip_y = (pipe_ctx)->plane_state->clip_rect.y; \
> + trace_pipe_state.clip_w = (pipe_ctx)->plane_state->clip_rect.width; \
> + trace_pipe_state.clip_h = (pipe_ctx)->plane_state->clip_rect.height; \
> + trace_pipe_state.recout_x = (pipe_ctx)->plane_res.scl_data.recout.x; \
> + trace_pipe_state.recout_y = (pipe_ctx)->plane_res.scl_data.recout.y; \
> + trace_pipe_state.recout_w = (pipe_ctx)->plane_res.scl_data.recout.width; \
> + trace_pipe_state.recout_h = (pipe_ctx)->plane_res.scl_data.recout.height; \
> + trace_pipe_state.viewport_x = (pipe_ctx)->plane_res.scl_data.viewport.x; \
> + trace_pipe_state.viewport_y = (pipe_ctx)->plane_res.scl_data.viewport.y; \
> + trace_pipe_state.viewport_w = (pipe_ctx)->plane_res.scl_data.viewport.width; \
> + trace_pipe_state.viewport_h = (pipe_ctx)->plane_res.scl_data.viewport.height; \
> + trace_pipe_state.flip_immediate = (pipe_ctx)->plane_state->flip_immediate; \
> + trace_pipe_state.surface_pitch = (pipe_ctx)->plane_state->plane_size.surface_pitch; \
> + trace_pipe_state.format = (pipe_ctx)->plane_state->format; \
> + trace_pipe_state.swizzle = (pipe_ctx)->plane_state->tiling_info.gfx9.swizzle; \
> + trace_pipe_state.update_flags = (pipe_ctx)->update_flags.raw; \
> + } while (0)
> +
> +#endif /* _AMDGPU_DM_TRACE_STRUCTS_DEFINED_ */
> +
> +TRACE_EVENT(amdgpu_dm_dc_pipe_state,
> + TP_PROTO(const struct amdgpu_dm_trace_pipe_state *pipe_state),
> + TP_ARGS(pipe_state),
> + TP_STRUCT__entry(
> + __field(int, pipe_idx)
> + __field(const void *, stream)
> + __field(int, stream_w)
> + __field(int, stream_h)
> + __field(int, dst_x)
> + __field(int, dst_y)
> + __field(int, dst_w)
> + __field(int, dst_h)
> + __field(int, src_x)
> + __field(int, src_y)
> + __field(int, src_w)
> + __field(int, src_h)
> + __field(int, clip_x)
> + __field(int, clip_y)
> + __field(int, clip_w)
> + __field(int, clip_h)
> + __field(int, recout_x)
> + __field(int, recout_y)
> + __field(int, recout_w)
> + __field(int, recout_h)
> + __field(int, viewport_x)
> + __field(int, viewport_y)
> + __field(int, viewport_w)
> + __field(int, viewport_h)
> + __field(int, flip_immediate)
> + __field(int, surface_pitch)
> + __field(int, format)
> + __field(int, swizzle)
> + __field(unsigned int, update_flags)
> + ),
> +
> + TP_fast_assign(
> + __entry->pipe_idx = pipe_state->pipe_idx;
> + __entry->stream = pipe_state->stream;
> + __entry->stream_w = pipe_state->stream_w;
> + __entry->stream_h = pipe_state->stream_h;
> + __entry->dst_x = pipe_state->dst_x;
> + __entry->dst_y = pipe_state->dst_y;
> + __entry->dst_w = pipe_state->dst_w;
> + __entry->dst_h = pipe_state->dst_h;
> + __entry->src_x = pipe_state->src_x;
> + __entry->src_y = pipe_state->src_y;
> + __entry->src_w = pipe_state->src_w;
> + __entry->src_h = pipe_state->src_h;
> + __entry->clip_x = pipe_state->clip_x;
> + __entry->clip_y = pipe_state->clip_y;
> + __entry->clip_w = pipe_state->clip_w;
> + __entry->clip_h = pipe_state->clip_h;
> + __entry->recout_x = pipe_state->recout_x;
> + __entry->recout_y = pipe_state->recout_y;
> + __entry->recout_w = pipe_state->recout_w;
> + __entry->recout_h = pipe_state->recout_h;
> + __entry->viewport_x = pipe_state->viewport_x;
> + __entry->viewport_y = pipe_state->viewport_y;
> + __entry->viewport_w = pipe_state->viewport_w;
> + __entry->viewport_h = pipe_state->viewport_h;
> + __entry->flip_immediate = pipe_state->flip_immediate;
> + __entry->surface_pitch = pipe_state->surface_pitch;
> + __entry->format = pipe_state->format;
> + __entry->swizzle = pipe_state->swizzle;
> + __entry->update_flags = pipe_state->update_flags;
> + ),
> + TP_printk("pipe_idx=%d stream=%p rct(%d,%d) dst=(%d,%d,%d,%d) "
> + "src=(%d,%d,%d,%d) clip=(%d,%d,%d,%d) recout=(%d,%d,%d,%d) "
> + "viewport=(%d,%d,%d,%d) flip_immediate=%d pitch=%d "
> + "format=%d swizzle=%d update_flags=%x",
> + __entry->pipe_idx,
> + __entry->stream,
> + __entry->stream_w,
> + __entry->stream_h,
> + __entry->dst_x,
> + __entry->dst_y,
> + __entry->dst_w,
> + __entry->dst_h,
> + __entry->src_x,
> + __entry->src_y,
> + __entry->src_w,
> + __entry->src_h,
> + __entry->clip_x,
> + __entry->clip_y,
> + __entry->clip_w,
> + __entry->clip_h,
> + __entry->recout_x,
> + __entry->recout_y,
> + __entry->recout_w,
> + __entry->recout_h,
> + __entry->viewport_x,
> + __entry->viewport_y,
> + __entry->viewport_w,
> + __entry->viewport_h,
> + __entry->flip_immediate,
> + __entry->surface_pitch,
> + __entry->format,
> + __entry->swizzle,
> + __entry->update_flags
> + )
> +);
> +
> #endif /* _AMDGPU_DM_TRACE_H_ */
>
> #undef TRACE_INCLUDE_PATH
> diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
> index dc463d99ef50..0c9f177e5827 100644
> --- a/drivers/gpu/drm/amd/display/dc/core/dc.c
> +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
> @@ -2644,6 +2644,17 @@ void dc_commit_updates_for_stream(struct dc *dc,
> }
> }
>
> + for (i = 0; i < MAX_PIPES; ++i) {
> + struct pipe_ctx *pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
> +
> + if (pipe_ctx->plane_state) {
> + struct amdgpu_dm_trace_pipe_state pipe_state_trace;
> +
> + fill_out_trace_pipe_state(pipe_state_trace, pipe_ctx);
> + trace_amdgpu_dm_dc_pipe_state(&pipe_state_trace);
> + }
> + }
> +
> commit_planes_for_stream(
> dc,
> srf_updates,
> diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
> index 8ca94f506195..464d0ad093b9 100644
> --- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
> +++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
> @@ -1020,15 +1020,22 @@ static bool dcn10_hw_wa_force_recovery(struct dc *dc)
>
> }
>
> -
> void dcn10_verify_allow_pstate_change_high(struct dc *dc)
> {
> - static bool should_log_hw_state; /* prevent hw state log by default */
> -
> if (!hubbub1_verify_allow_pstate_change_high(dc->res_pool->hubbub)) {
> - if (should_log_hw_state) {
> - dcn10_log_hw_state(dc, NULL);
> + int i;
> +
> + for (i = 0; i < MAX_PIPES; ++i) {
> + struct pipe_ctx *pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];
> +
> + if (pipe_ctx->plane_state) {
> + struct amdgpu_dm_trace_pipe_state pipe_state_trace;
> +
> + fill_out_trace_pipe_state(pipe_state_trace, pipe_ctx);
> + trace_amdgpu_dm_dc_pipe_state(&pipe_state_trace);
> + }
> }
> +
> BREAK_TO_DEBUGGER();
> if (dcn10_hw_wa_force_recovery(dc)) {
> /*check again*/
>
next prev parent reply other threads:[~2020-09-11 17:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-11 14:59 [PATCH v2 0/4] Enlarge tracepoints in the display component Rodrigo Siqueira
2020-09-11 14:59 ` [PATCH v2 1/4] drm/amd/display: Rework registers tracepoint Rodrigo Siqueira
2020-09-11 17:13 ` Kazlauskas, Nicholas
2020-09-11 14:59 ` [PATCH v2 2/4] drm/amd/display: Add tracepoint for amdgpu_dm Rodrigo Siqueira
2020-09-11 14:59 ` [PATCH v2 3/4] drm/amd/display: Add pipe_state tracepoint Rodrigo Siqueira
2020-09-11 17:11 ` Kazlauskas, Nicholas [this message]
2020-09-11 14:59 ` [PATCH v2 4/4] drm/amd/display: Add tracepoint for capturing clocks state Rodrigo Siqueira
2020-09-16 9:12 ` [PATCH v2 0/4] Enlarge tracepoints in the display component Daniel Vetter
2020-09-16 15:27 ` Kazlauskas, Nicholas
2020-09-17 11:36 ` Daniel Vetter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e70b5c24-ece8-c989-7058-890e51bc6ae1@amd.com \
--to=nicholas.kazlauskas@amd.com \
--cc=Rodrigo.Siqueira@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=harry.wentland@amd.com \
--cc=hersenxs.wu@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sunpeng.li@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®