Re: [PATCH net-next v4 4/7] net: dsa: mt7530: call port 6 setup from mt7530_mac_config()

["Arınç ÜNAL" <arinc.unal@arinc9.com>]

On 4.02.2024 19:34, Arınç ÜNAL via B4 Relay wrote:
> From: Arınç ÜNAL <arinc.unal@arinc9.com>
> 
> mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more
> things than setting up port 6. That part was moved to more appropriate
> locations, mt7530_setup() and mt7530_pll_setup().
> 
> Now that all it does is set up port 6, rename it to mt7530_setup_port6(),
> and move it to a more appropriate location, under mt7530_mac_config().
> 
> Change mt7530_setup_port6() to void as there're no error cases.
> 
> Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function
> pointer.
> 
> This is the code path for setting up the ports before:
> 
> dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
> -> mt753x_mac_config()
>     -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
>        -> mt7530_setup_port5()
> -> mt753x_pad_setup()
>     -> mt753x_info :: pad_setup() -> mt7530_pad_clk_setup()
> 
> This is after:
> 
> dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
> -> mt753x_mac_config()
>     -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
>        -> mt7530_setup_port5()
>        -> mt7530_setup_port6()
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
> ---
>   drivers/net/dsa/mt7530.c | 17 ++++++++++-------
>   1 file changed, 10 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
> index 82e90da1e52b..18842c759b63 100644
> --- a/drivers/net/dsa/mt7530.c
> +++ b/drivers/net/dsa/mt7530.c
> @@ -414,8 +414,8 @@ mt753x_preferred_default_local_cpu_port(struct dsa_switch *ds)
>   }
>   
>   /* Setup port 6 interface mode and TRGMII TX circuit */
> -static int
> -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
> +static void
> +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
>   {
>   	struct mt7530_priv *priv = ds->priv;
>   	u32 ncpo1, ssc_delta, xtal;
> @@ -465,7 +465,11 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
>   
>   	/* Enable the MT7530 TRGMII clocks */
>   	core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
> +}
>   
> +static int
> +mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
> +{
>   	return 0;
>   }
>   
> @@ -2613,11 +2617,10 @@ mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
>   {
>   	struct mt7530_priv *priv = ds->priv;
>   
> -	/* Only need to setup port5. */
> -	if (port != 5)
> -		return 0;
> -
> -	mt7530_setup_port5(priv->ds, interface);
> +	if (port == 5) {

Stray brace, will remove.

Arınç