Re: [PATCH 3/3] arm64: dts: qcom: glymur: Add EC thermal zones

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 9/28/26 8:36 AM, Anvesh Jain P wrote:
> Add support for back cover, keyboard, and SoC thermal zones through
> temperature sensors hosted on the EC for Glymur and Mahua CRDs.
> 
> Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
> ---
>  arch/arm64/boot/dts/qcom/glymur-crd.dtsi | 45 +++++++++++++++++++++++++++++++-
>  1 file changed, 44 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> index e27c697e3170..571c98124a40 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dtsi
> @@ -594,10 +594,12 @@ &i2c9 {
>  
>  	status = "okay";
>  
> -	embedded-controller@76 {
> +	ec: embedded-controller@76 {

"ec" is a super short label, perhaps let's spell out
embedded_controller

[...]

> +&thermal_zones {
> +	ec-back-cover {
> +		polling-delay = <10000>;
> +		thermal-sensors = <&ec 2>;
> +
> +		trips {
> +			trip-point0 {
> +				temperature = <90000>;

This is *really* hot!

> +				hysteresis = <5000>;
> +				type = "hot";
> +			};
> +		};
> +	};
> +
> +	ec-keyboard {
> +		polling-delay = <10000>;
> +		thermal-sensors = <&ec 1>;
> +
> +		trips {
> +			trip-point0 {
> +				temperature = <90000>;

Likewise

Konrad