[PATCH net-next v3 06/12] dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties

[Daniel Golle <daniel@makrotopia.org>]

Add support for standard tx-internal-delay-ps and rx-internal-delay-ps
properties on port nodes to allow fine-tuning of RGMII clock delays.

The GSWIP switch hardware supports delay values in 500 picosecond
increments from 0 to 3500 picoseconds, with a default of 2000
picoseconds for both TX and RX delays.

This corresponds to the driver changes that allow adjusting MII delays
using Device Tree properties instead of relying solely on the PHY
interface mode.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v3:
 * redefine ports node so properties are defined actually apply
 * RGMII port with 2ps delay is 'rgmii-id' mode

 .../bindings/net/dsa/lantiq,gswip.yaml        | 29 +++++++++++++++++--
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
index f3154b19af78..b0227b80716c 100644
--- a/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/lantiq,gswip.yaml
@@ -6,8 +6,29 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Lantiq GSWIP Ethernet switches
 
-allOf:
-  - $ref: dsa.yaml#/$defs/ethernet-ports
+$ref: dsa.yaml#
+
+patternProperties:
+  "^(ethernet-)?ports$":
+    type: object
+    patternProperties:
+      "^(ethernet-)?port@[0-6]$":
+        $ref: dsa-port.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          tx-internal-delay-ps:
+            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
+            default: 2000
+            description:
+              RGMII TX Clock Delay defined in pico seconds.
+              The delay lines adjust the MII clock vs. data timing.
+          rx-internal-delay-ps:
+            enum: [0, 500, 1000, 1500, 2000, 2500, 3000, 3500]
+            default: 2000
+            description:
+              RGMII RX Clock Delay defined in pico seconds.
+              The delay lines adjust the MII clock vs. data timing.
 
 maintainers:
   - Hauke Mehrtens <hauke@hauke-m.de>
@@ -113,8 +134,10 @@ examples:
                     port@0 {
                             reg = <0>;
                             label = "lan3";
-                            phy-mode = "rgmii";
+                            phy-mode = "rgmii-id";
                             phy-handle = <&phy0>;
+                            tx-internal-delay-ps = <2000>;
+                            rx-internal-delay-ps = <2000>;
                     };
 
                     port@1 {
-- 
2.51.1