mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: Will Deacon <will.deacon@arm.com>,
	Christopher Covington <cov@codeaurora.org>
Cc: "Catalin Marinas" <catalin.marinas@arm.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>,
	"Radim Krčmář" <rkrcmar@redhat.com>,
	"Christoffer Dall" <christoffer.dall@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	kvmarm@lists.cs.columbia.edu,
	"Shanker Donthineni" <shankerd@codeaurora.org>
Subject: Re: [PATCH] arm64: Work around Falkor erratum 1009
Date: Thu, 8 Dec 2016 11:35:34 +0000	[thread overview]
Message-ID: <e7b4c7f5-a40b-58b2-acb0-ec973928fdb0@arm.com> (raw)
In-Reply-To: <20161208112042.GB706@arm.com>

On 08/12/16 11:20, Will Deacon wrote:
> On Wed, Dec 07, 2016 at 03:04:31PM -0500, Christopher Covington wrote:
>> From: Shanker Donthineni <shankerd@codeaurora.org>
>>
>> During a TLB invalidate sequence targeting the inner shareable
>> domain, Falkor may prematurely complete the DSB before all loads
>> and stores using the old translation are observed; instruction
>> fetches are not subject to the conditions of this erratum.
>>
>> Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
>> Signed-off-by: Christopher Covington <cov@codeaurora.org>
>> ---
>>  arch/arm64/Kconfig                | 10 +++++++++
>>  arch/arm64/include/asm/cpucaps.h  |  3 ++-
>>  arch/arm64/include/asm/tlbflush.h | 43 +++++++++++++++++++++++++++++++++++++++
>>  arch/arm64/kernel/cpu_errata.c    |  7 +++++++
>>  arch/arm64/kvm/hyp/tlb.c          | 39 ++++++++++++++++++++++++++++++-----
>>  5 files changed, 96 insertions(+), 6 deletions(-)
>>
>> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
>> index 1004a3d..125440f 100644
>> --- a/arch/arm64/Kconfig
>> +++ b/arch/arm64/Kconfig
>> @@ -485,6 +485,16 @@ config QCOM_FALKOR_ERRATUM_E1003
>>  
>>  	  If unsure, say Y.
>>  
>> +config QCOM_FALKOR_ERRATUM_E1009
>> +	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
>> +	default y
>> +	help
>> +	  Falkor CPU may prematurely complete a DSB following a TLBI xxIS
>> +	  invalidate maintenance operations. Repeat the TLBI operation one
>> +	  more time to fix the issue.
>> +
>> +	  If unsure, say Y.
> 
> Call me perverse, but I like this workaround. People often tend to screw
> up TLBI and DVM sync, but the IPI-based workaround is horribly invasive
> and fragile. Simply repeating the operation tends to be enough to make
> the chance of failure small enough to be acceptable.
> 
>> diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h
>> index cb6a8c2..5357d7f 100644
>> --- a/arch/arm64/include/asm/cpucaps.h
>> +++ b/arch/arm64/include/asm/cpucaps.h
>> @@ -35,7 +35,8 @@
>>  #define ARM64_HYP_OFFSET_LOW			14
>>  #define ARM64_MISMATCHED_CACHE_LINE_SIZE	15
>>  #define ARM64_WORKAROUND_QCOM_FALKOR_E1003	16
>> +#define ARM64_WORKAROUND_QCOM_FALKOR_E1009	17
> 
> Could you rename this to something like ARM64_WORKAROUND_REPEAT_TLBI, so
> that it could potentially be used by others?

And add a parameter to it so that we can generate multiple TLBIs,
depending on the level of brokenness? ;-)

	M.
-- 
Jazz is not dead. It just smells funny...

  reply	other threads:[~2016-12-08 11:35 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-07 20:00 [PATCH 1/3] arm64: Define Qualcomm Technologies Falkor v1 CPU Christopher Covington
2016-12-07 20:00 ` [PATCH 2/3] arm64: Work around Falkor erratum 1003 Christopher Covington
2016-12-08 10:31   ` Catalin Marinas
2016-12-19 21:27     ` Christopher Covington
2016-12-08 11:31   ` Mark Rutland
2016-12-07 20:04 ` [PATCH] arm64: Work around Falkor erratum 1009 Christopher Covington
2016-12-08 11:20   ` Will Deacon
2016-12-08 11:35     ` Marc Zyngier [this message]
2016-12-08 11:45   ` Mark Rutland
2016-12-08 13:27     ` Catalin Marinas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=e7b4c7f5-a40b-58b2-acb0-ec973928fdb0@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=christoffer.dall@linaro.org \
    --cc=cov@codeaurora.org \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=shankerd@codeaurora.org \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®