[PATCH v10 4/8] iio: adc: rzg2l_adc: Use adc-helpers

[Matti Vaittinen <mazziesaccount@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 5391 bytes --]

The new devm_iio_adc_device_alloc_chaninfo_se() -helper is intended to
help drivers avoid open-coding the for_each_node -loop for getting the
channel IDs. The helper provides standard way to detect the ADC channel
nodes (by the node name), and a standard way to convert the "reg"
-properties to channel identification numbers, used in the struct
iio_chan_spec. Furthermore, the helper can optionally check the found
channel IDs are smaller than given maximum. This is useful for callers
which later use the IDs for example for indexing a channel data array.

The original driver treated all found child nodes as channel nodes. The
new helper requires channel nodes to be named channel[@N]. This should
help avoid problems with devices which may contain also other but ADC
child nodes. Quick grep from arch/* with the rzg2l_adc's compatible
string didn't reveal any in-tree .dts with channel nodes named
otherwise. Also, same grep shows all the .dts seem to have channel IDs
between 0..num of channels.

Use the new helper.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>

---
NOTE: This change now drops a print "no channel children" which used to
be printed if no channel nodes were found. It also changes the return
value from -ENODEV to -ENOENT.

Revision history:
v8 =>
 - No changes
v7 => v8:
 - drop explicit "no channels check". It is now done inside the
   devm_iio_adc_device_alloc_chaninfo_se().
v6 => v7:
 - Fix function name in the commit message
v5 => v6:
 - Commit message typofix
v4 => v5:
 - Drop the diff-channel stuff from the commit message
v3 => v4:
 - Adapt to 'drop diff-channel support' changes to ADC-helpers
 - select ADC helpers in the Kconfig
 - Rebased to 6.14-rc3 => channel type can no longer come from the
   template.

v2 => v3:
 - New patch

The change is compile tested only!! Testing before applying is highly
appreciated (as always!).
---
 drivers/iio/adc/Kconfig     |  1 +
 drivers/iio/adc/rzg2l_adc.c | 39 +++++++++++++++----------------------
 2 files changed, 17 insertions(+), 23 deletions(-)

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 37b70a65da6f..e4933de0c366 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1222,6 +1222,7 @@ config RICHTEK_RTQ6056
 config RZG2L_ADC
 	tristate "Renesas RZ/G2L ADC driver"
 	depends on ARCH_RZG2L || COMPILE_TEST
+	select IIO_ADC_HELPER
 	help
 	  Say yes here to build support for the ADC found in Renesas
 	  RZ/G2L family.
diff --git a/drivers/iio/adc/rzg2l_adc.c b/drivers/iio/adc/rzg2l_adc.c
index 883c167c0670..8097e59da516 100644
--- a/drivers/iio/adc/rzg2l_adc.c
+++ b/drivers/iio/adc/rzg2l_adc.c
@@ -11,6 +11,7 @@
 #include <linux/cleanup.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
+#include <linux/iio/adc-helpers.h>
 #include <linux/iio/iio.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -324,48 +325,39 @@ static irqreturn_t rzg2l_adc_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+static const struct iio_chan_spec rzg2l_adc_chan_template = {
+	.indexed = 1,
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+};
+
 static int rzg2l_adc_parse_properties(struct platform_device *pdev, struct rzg2l_adc *adc)
 {
 	const struct rzg2l_adc_hw_params *hw_params = adc->hw_params;
 	struct iio_chan_spec *chan_array;
 	struct rzg2l_adc_data *data;
-	unsigned int channel;
 	int num_channels;
-	int ret;
 	u8 i;
 
 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
-	num_channels = device_get_child_node_count(&pdev->dev);
-	if (!num_channels)
-		return dev_err_probe(&pdev->dev, -ENODEV, "no channel children\n");
+	num_channels = devm_iio_adc_device_alloc_chaninfo_se(&pdev->dev,
+						&rzg2l_adc_chan_template,
+						hw_params->num_channels - 1,
+						&chan_array);
+	if (num_channels < 0)
+		return num_channels;
 
 	if (num_channels > hw_params->num_channels)
 		return dev_err_probe(&pdev->dev, -EINVAL,
 				     "num of channel children out of range\n");
 
-	chan_array = devm_kcalloc(&pdev->dev, num_channels, sizeof(*chan_array),
-				  GFP_KERNEL);
-	if (!chan_array)
-		return -ENOMEM;
+	for (i = 0; i < num_channels; i++) {
+		int channel = chan_array[i].channel;
 
-	i = 0;
-	device_for_each_child_node_scoped(&pdev->dev, fwnode) {
-		ret = fwnode_property_read_u32(fwnode, "reg", &channel);
-		if (ret)
-			return ret;
-
-		if (channel >= hw_params->num_channels)
-			return -EINVAL;
-
-		chan_array[i].type = rzg2l_adc_channels[channel].type;
-		chan_array[i].indexed = 1;
-		chan_array[i].channel = channel;
-		chan_array[i].info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
 		chan_array[i].datasheet_name = rzg2l_adc_channels[channel].name;
-		i++;
+		chan_array[i].type = rzg2l_adc_channels[channel].type;
 	}
 
 	data->num_channels = num_channels;
@@ -626,3 +618,4 @@ module_platform_driver(rzg2l_adc_driver);
 MODULE_AUTHOR("Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>");
 MODULE_DESCRIPTION("Renesas RZ/G2L ADC driver");
 MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS("IIO_DRIVER");
-- 
2.49.0


[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]