From: Marc Zyngier <marc.zyngier@arm.com>
To: Zhao Qiang <qiang.zhao@nxp.com>, oss@buserror.net
Cc: jason@lakedaemon.net, xiaobo.xie@nxp.com,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: Re: [Patch V7 2/4] irqchip/qeic: merge qeic init code from platforms to a common function
Date: Thu, 5 Jan 2017 16:59:45 +0000 [thread overview]
Message-ID: <e8a862c2-3853-4188-8002-0f0790dfa7fa@arm.com> (raw)
In-Reply-To: <1482741166-33164-2-git-send-email-qiang.zhao@nxp.com>
On 26/12/16 08:32, Zhao Qiang wrote:
> The codes of qe_ic init from a variety of platforms are redundant,
> merge them to a common function and put it to irqchip/irq-qeic.c
>
> For non-p1021_mds mpc85xx_mds boards, use "qe_ic_init(np, 0,
> qe_ic_cascade_low_mpic, qe_ic_cascade_high_mpic);" instead of
> "qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);".
>
> qe_ic_cascade_muxed_mpic was used for boards has the same interrupt
> number for low interrupt and high interrupt, qe_ic_init has checked
> if "low interrupt == high interrupt"
>
> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
> ---
> Changes for v2:
> - modify subject and commit msg
> - add check for qeic by type
> Changes for v3:
> - na
> Changes for v4:
> - na
> Changes for v5:
> - na
> Changes for v6:
> - rebase
> Changes for v7:
> - na
>
> arch/powerpc/platforms/83xx/misc.c | 15 ---------------
> arch/powerpc/platforms/85xx/corenet_generic.c | 9 ---------
> arch/powerpc/platforms/85xx/mpc85xx_mds.c | 14 --------------
> arch/powerpc/platforms/85xx/mpc85xx_rdb.c | 16 ----------------
> arch/powerpc/platforms/85xx/twr_p102x.c | 14 --------------
> drivers/irqchip/irq-qeic.c | 16 ++++++++++++++++
> 6 files changed, 16 insertions(+), 68 deletions(-)
>
> diff --git a/arch/powerpc/platforms/83xx/misc.c b/arch/powerpc/platforms/83xx/misc.c
> index d75c981..c09a135 100644
> --- a/arch/powerpc/platforms/83xx/misc.c
> +++ b/arch/powerpc/platforms/83xx/misc.c
> @@ -93,24 +93,9 @@ void __init mpc83xx_ipic_init_IRQ(void)
> }
>
> #ifdef CONFIG_QUICC_ENGINE
> -void __init mpc83xx_qe_init_IRQ(void)
> -{
> - struct device_node *np;
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (!np) {
> - np = of_find_node_by_type(NULL, "qeic");
> - if (!np)
> - return;
> - }
> - qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
> - of_node_put(np);
> -}
> -
> void __init mpc83xx_ipic_and_qe_init_IRQ(void)
> {
> mpc83xx_ipic_init_IRQ();
> - mpc83xx_qe_init_IRQ();
> }
> #endif /* CONFIG_QUICC_ENGINE */
>
> diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
> index 1179115..1d96c3f 100644
> --- a/arch/powerpc/platforms/85xx/corenet_generic.c
> +++ b/arch/powerpc/platforms/85xx/corenet_generic.c
> @@ -41,8 +41,6 @@ void __init corenet_gen_pic_init(void)
> unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU |
> MPIC_NO_RESET;
>
> - struct device_node *np;
> -
> if (ppc_md.get_irq == mpic_get_coreint_irq)
> flags |= MPIC_ENABLE_COREINT;
>
> @@ -50,13 +48,6 @@ void __init corenet_gen_pic_init(void)
> BUG_ON(mpic == NULL);
>
> mpic_init(mpic);
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> - }
> }
>
> /*
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> index d7e440e..06f34a9 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
> @@ -283,20 +283,6 @@ static void __init mpc85xx_mds_qeic_init(void)
> of_node_put(np);
> return;
> }
> -
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (!np) {
> - np = of_find_node_by_type(NULL, "qeic");
> - if (!np)
> - return;
> - }
> -
> - if (machine_is(p1021_mds))
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - else
> - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
> - of_node_put(np);
> }
> #else
> static void __init mpc85xx_mds_qe_init(void) { }
> diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> index 1006950..000d385 100644
> --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c
> @@ -48,10 +48,6 @@ void __init mpc85xx_rdb_pic_init(void)
> {
> struct mpic *mpic;
>
> -#ifdef CONFIG_QUICC_ENGINE
> - struct device_node *np;
> -#endif
> -
> if (of_machine_is_compatible("fsl,MPC85XXRDB-CAMP")) {
> mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET |
> MPIC_BIG_ENDIAN |
> @@ -66,18 +62,6 @@ void __init mpc85xx_rdb_pic_init(void)
>
> BUG_ON(mpic == NULL);
> mpic_init(mpic);
> -
> -#ifdef CONFIG_QUICC_ENGINE
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> -
> - } else
> - pr_err("%s: Could not find qe-ic node\n", __func__);
> -#endif
> -
> }
>
> /*
> diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c
> index 360f625..6be9b33 100644
> --- a/arch/powerpc/platforms/85xx/twr_p102x.c
> +++ b/arch/powerpc/platforms/85xx/twr_p102x.c
> @@ -35,26 +35,12 @@ static void __init twr_p1025_pic_init(void)
> {
> struct mpic *mpic;
>
> -#ifdef CONFIG_QUICC_ENGINE
> - struct device_node *np;
> -#endif
> -
> mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
> MPIC_SINGLE_DEST_CPU,
> 0, 256, " OpenPIC ");
>
> BUG_ON(mpic == NULL);
> mpic_init(mpic);
> -
> -#ifdef CONFIG_QUICC_ENGINE
> - np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> - if (np) {
> - qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> - qe_ic_cascade_high_mpic);
> - of_node_put(np);
> - } else
> - pr_err("Could not find qe-ic node\n");
> -#endif
> }
>
> /* ************************************************************************
> diff --git a/drivers/irqchip/irq-qeic.c b/drivers/irqchip/irq-qeic.c
> index 48ceded..1463731 100644
> --- a/drivers/irqchip/irq-qeic.c
> +++ b/drivers/irqchip/irq-qeic.c
> @@ -598,4 +598,20 @@ static int __init init_qe_ic_sysfs(void)
> return 0;
> }
>
> +static int __init qeic_of_init(void)
> +{
> + struct device_node *np;
> +
> + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
> + if (!np) {
> + np = of_find_node_by_type(NULL, "qeic");
> + if (!np)
> + return;
> + }
> + qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
> + qe_ic_cascade_high_mpic);
> + of_node_put(np);
> +}
> +
> +subsys_initcall(qeic_of_init);
Why is it a subsys_initcall? Can't you use IRQCHIP_DECLARE(), like any
other interrupt controller that is DT driven? irq-xilinx-intc.c is used
on powerpc as well, and is using that infrastructure, so there must be a
way for you to use it too.
Also, please add a cover letter to your series and keep the changelog there.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2017-01-05 16:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-26 8:32 [Patch V7 1/4] irqchip/qeic: move qeic driver from drivers/soc/fsl/qe Zhao Qiang
2016-12-26 8:32 ` [Patch V7 2/4] irqchip/qeic: merge qeic init code from platforms to a common function Zhao Qiang
2017-01-05 16:59 ` Marc Zyngier [this message]
2016-12-26 8:32 ` [Patch V7 3/4] irqchip/qeic: merge qeic_of_init into qe_ic_init Zhao Qiang
2016-12-26 8:32 ` [Patch V7 4/4] irqchip/qeic: remove PPCisms for QEIC Zhao Qiang
2017-01-05 17:04 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e8a862c2-3853-4188-8002-0f0790dfa7fa@arm.com \
--to=marc.zyngier@arm.com \
--cc=jason@lakedaemon.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=oss@buserror.net \
--cc=qiang.zhao@nxp.com \
--cc=xiaobo.xie@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®