Re: [PATCH 1/2] crypto: caam: Change the i.MX8MQ check support all i.MX8M variants

[Schrempf Frieder <frieder.schrempf@kontron.de>]

Hi Adam,

On 30.11.19 23:51, Adam Ford wrote:
> The i.MX8M Mini uses the same crypto engine as the i.MX8MQ, but
> the driver is restricting the check to just the i.MX8MQ.
> 
> This patch lets the driver support all i.MX8M Variants if enabled.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>

What about the following lines in run_descriptor_deco0()? Does this 
condition also apply to i.MX8MM?

drivers/crypto/caam/ctrl.c:

	if (ctrlpriv->virt_en == 1 ||
	    /*
	     * Apparently on i.MX8MQ it doesn't matter if virt_en == 1
	     * and the following steps should be performed regardless
	     */
	    of_machine_is_compatible("fsl,imx8mq")) {
		clrsetbits_32(&ctrl->deco_rsr, 0, DECORSR_JR0);

		while (!(rd_reg32(&ctrl->deco_rsr) & DECORSR_VALID) &&
		       --timeout)
			cpu_relax();

		timeout = 100000;
	}

Regards,
Frieder

> 
> diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
> index db22777d59b4..1ce03f8961b6 100644
> --- a/drivers/crypto/caam/ctrl.c
> +++ b/drivers/crypto/caam/ctrl.c
> @@ -527,7 +527,7 @@ static const struct soc_device_attribute caam_imx_soc_table[] = {
>   	{ .soc_id = "i.MX6UL", .data = &caam_imx6ul_data },
>   	{ .soc_id = "i.MX6*",  .data = &caam_imx6_data },
>   	{ .soc_id = "i.MX7*",  .data = &caam_imx7_data },
> -	{ .soc_id = "i.MX8MQ", .data = &caam_imx7_data },
> +	{ .soc_id = "i.MX8M*", .data = &caam_imx7_data },
>   	{ .family = "Freescale i.MX" },
>   	{ /* sentinel */ }
>   };
>